• Journal of Korean Physical Therapy Science
• /
• v.19 no.2
• /
• pp.17-24
• /
• 2012

Purpose : The purpose of this study was to show the effect of postural training through action observation (AO) on craniovertebral angle (CVA) and cranial rotation angle (CRA) of forward head posture (FHP). Methods : From 16 subjects of having the FHP who consist of postural training through the AO (n = 8) and control group (n = 8) were training to three times per one week during three weeks. FHP measurements for pre and post the intervention use to Wiz-pacs(Wiz-Picture Achiving Communication System) from X-ray change of CVA and CRA. Results : The study for the change within the group pre and post the intervention, CVA and CRA were found the significant differences only in the postural training group through the AO (p<.05). In the comparison of the rates of change between the groups pre and post the intervention CVA and CRA all showed the significant differences (p<.05), and in the comparison of the rates of average change of individual variables in each groups, the postural training group through the AO showed more change rates. Conclusion : The study suggests that when people with FHP received the postural training, the postural training through the AO resulted in more change into the correct postures.

• Journal of International Academy of Physical Therapy Research
• /
• v.11 no.1
• /
• pp.1954-1959
• /
• 2020

Background: Due to aging, blood flow rate decreases, also posture and chewing habit may be changed. Objective: To identify that changes in blood velocity in the common carotid arteries (CCAs) in old persons with unilateral chewing habit (UCH) and forward head posture (FHP) in the elderly. Design: An observational cross-sectional study. Methods: Chewing habits, FHP, and CCAs velocities were assessed in 85 elderly subjects. Chewing habits were measured by visual observation. CCAs measured the peak systolic velocity (PSV), end-diastolic velocity (EDV), minimum diastolic velocity, and resistivity index. The subjects were divided into UCH and bilateral chewing habit groups depending on chewing habit. The subjects were also divided into >49 degrees and <49 degrees for comparison of blood flow between the left and right CCAs. Results: In the UCH, the chewing side had significantly higher EDV (P=.003), PSV (P=.023) than the non-chewing side. There was no significant difference in velocity between the CCAs in the FHP. Conclusion: This study shows that the blood flow velocity of the chewing side of UCH was higher, and unilateral chewing affects the CCAs velocity and thus highlight the importance of chewing habit in the elderly than head posture.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.6
• /
• pp.780-786
• /
• 2005

This study presents a non-video, non-invasive, automatic, on-site monitoring system the system employs ultrasonic transducers to detect behavior in sows before, during and after parturition. An ultrasonic transmitting/receiving (T/R) circuit of 40 kHz was mounted above a conventional parturition bed. The T/R units use ultrasonic time-of-flight (TOF) ranging technology to measure the height of the confined sows at eight predetermined locations. From this data, three momentary postures of the sow are determined, characterized as standing-posture (SP), lateral-lying-posture (LLP) and sitting posture (STP). By examining the frequencies of position switch Stand-Up-Sequence (SUS) between standing-posture (SP), lateral-lying-posture (LLP) and sitting-posture (STP) rate can be determined for the duration of the sow' confinement. Three experimental pureblooded Landrace sows undergoing normal gestation were monitored for the duration of confinement. In agreement with common observation, the sows exhibited increased restlessness as parturition approached. Analysis of the data collected in our study showed a distinct peak in Stand-Up-Sequence (SUS, i.e. the transition from lying laterally to standing up ) and sitting-posture (STP) rate approximately 12 h prior to parturition, the observed peak being 5 to 10 times higher than observed on any other measurement day. It is concluded that the presented methodology is a robust, low-cost, lowlabor method for the continuous remote monitoring of sows and similar large animals for parturition and other behavior. It is suggested that the system could be applied to automatic prediction of sow parturition, with automatic notification of remote management personnel so human attendance at birth could reduce rates of sow and piglet mortality. The results of this study provide a good basis for enhancing automation and reducing costs in large-scale sow husbandry and have applications in the testing of various large mammals for the effects of medications, diets, genetic modifications and environmental factors.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.341-346
• /
• 2013

Purpose: The purpose of this study was to evaluate whether a relationship exists between head posture and phoria, and usefulness in examining habitual head posture. Methods: Twenty two subjects (20 males and 2 females, mean age $23.6{\pm}2.7$ years) with abnormal phoria from participants randomized were enrolled in this study. For all subjects, testing included case history, cover test, refraction, phoria and vergence test. Habitual head posture (head posture, head tilt and face turn) was measured by Impression IST, and observed by examiners. Results: The abnormal head posture was revealed in some subjects with abnormal phoria. Spearman' correlation ($\rho$=0.524, p=0.045) showed significant correction between face turn and phoria at distance in 15 subjects with prism prescription. No significant relationship between head posture and phoria was found in subjects with abnormal phoria. The objective measurement and subjective observation of head posture showed insignificant correction but there was a distinct difference. The former was detail and the latter was discriminate. Conclusions: Presence of abnormal head posture was found in phoric subjects. The results indicate the need to observe habitual head posture at all major positions of gaze in phoria.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.19 no.4
• /
• pp.412-422
• /
• 2009

This study was conducted to assess exposure to musculoskeletal disorder(MSD) risk factors in hospital personnel who performed non-routinized work tasks. A tool ("PATH-KOSHA" version) was newly revised from PATH(Posture, Activity, Tools and Handling) method and uploaded into a personal digital assistant(PDA). The version was used, on a basis of direct-observation, to collect PATH data at the 2 hospital settings in different regions. Job analysis was performed to get various information (e.g., work and rest time, task type) as well. The data collected were visually checked for data cleaning and stored for future data analysis. A total of 1,992 PATH observations were made for 37 hospital workers. Exposure levels varied across 18 items of the MSD risk factors. The highest percent time spent on non-neutral postures was 53% for wrist deviation, followed by 47%(pinch grip), 35%(trunk posture), 23%(neck posture), and 20%(shoulder/arm posture). The highest percent time spent among hand activity level(HAL) variables was 55% for HAL-cat2 (HAL: 3.3 - <6.7). The percent time of items with respect to both loads with more than 5kg and contact stress was less than 4%. Vibration was not exposed in the study workers. Different aspects were discussed for findings. The study results showed that wrist deviation was highest in percent time spent on awkward posture while HAL-cat2 was highest in hand repetition. The study suggests that distal upper extremity posture and HAL should be primarily addressed and controlled in non-routinized work including the hospital settings.

• Journal of Oral Medicine and Pain
• /
• v.25 no.1
• /
• pp.87-97
• /
• 2000

This study was performed to investigate the effects of repetitive mandibular opening movement and change of head posture on the vibration of temporomandibular(TM) joint. For this study, 23 patients with internal derangement of TM joint were selected. All they had clinically noticeable TM joint sound. Observation of the joint vibration were performed in four head postures, namely, natural head posture (NHP), forward head posture(FHP), upward head posture(UHP), and downward head posture(DHP). For recording of joint sound vibration, Sonopak of Biopak system(Bioresearch Inc., Milwaukee, USA) was used, The author could take results related to integral higher than 300Hz, integral lower than 300Hz, ratio of integral higher than 300Hz to integral lower than 300Hz, total integral which was sum of higher and lower integral, peak amplitude, and peak frequency in each opening movement, which was carried out three times in each head posture. Integral means amount of vibration. The data obtained were analysed by SPSS windows program and the results of this study were as follows : 1. In NHP, total integral in right TM joint was 5O.3Hz in the first opening, 67.9Hz in the second opening, and 74.0Hz in the third opening movement, bur there was no significant increase of total integral with repetitive opening movement. This finding was similar in left TM joint. Integral lower than 300Hz were higher than integral higher than 300Hz in almost every opening movement. 2. There was no significant difference of total integral between right and left side of TM joint, but there was a tendency of higher total integral in right TM joint than that in left TM joint except for results in DHP. 3. Peak amplitude in NHP ranged from 2.0 to 4.7, and peak frequency in NHP were 101.4-170.0Hz. And there was no consistent findings related to increase or decrease of these value according to repetitive opening in each head posture. 4. Change of head posture did not result any difference in integral, peak amplitude, and peak frequency. In conclusion, change of head posture and repetitive mandibular opening movement did not make any significant effect on the vibration of temporo-mandibular joint, especially, on total integral, peak amplitude, and peak frequency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.4
• /
• pp.307-314
• /
• 2006

In this paper, we present a comprehensive study for the development of quadruped walking robot. To understand the walking posture of a tetrapod animal, we begin with a careful observation on the skeletal system of tertapod animals. From taking a side view of their skeletal system, it is noted that their fore limbs and hind limbs perform characteristic roles during walking. Moreover, the widths of footprints and energy efficiency in walking have a close relationship through taking a front view of their walking posture. According to these observations, we present a control method where the kinematical solutions are not necessary because we develop a new rhythmic gait pattern for the quadruped walking robot. Though the proposed control method and rhythmic pattern are simple, they can provide the suitable motion planning for the robot since the resultant movement is based on the animal's movements. The validity of the proposed idea is demonstrated through dynamic simulations.

• The Journal of Churna Manual Medicine for Spine and Nerves
• /
• v.5 no.2
• /
• pp.181-191
• /
• 2010

Current treatment for adolescent idiopathic scoliosis(AIS) consists of three phases: observation, bracing, and surgery. Although there are many nonsurgical treatment(bracing, electrical stimulation, exercise, manipulation, acupuncture, etc), their effect is still controversial. In many paper, Schroth method was reported good immediate response to conservative care, which could be considered a sign of good prognosis. Schroth method became effective thai specialists in physiotherapy for spinal deformities teach the patient how to perform a routine of 'curve pattern' specific exercises with the purpose to facilitate the correction of the asymmetric posture and to teach the patient to maintain the corrected posture in dally activities. This Principles of correction exercise treatment are based on those developed by the German physiotherepist K. Schroth.

• Korean Journal of Occupational Health Nursing
• /
• v.11 no.2
• /
• pp.121-131
• /
• 2002

Objective: The purpose of this study was to determine the physical load by identifying harmfully working postures and to develop recommendations for improving the existing situation with nurses in ICU, thereby to provide the basis for development of work-related musculoskeletal preventive program. Method: Various types of tasks were recorded with a video camera to chart and analyze different postures by OWAS(Ovako Working Posture Analysing System). Collected data showed that poor postures were adopted, not only for lifting or repositoning a patient, but also for other tasks. Data Analysis: The performed activities were then divided into Nursing Intervention Classification. Altogether 128 postures were selected for analysis. Then they were classified into different OAC (OWAS Action Categories). From all the observation, unhealthy postures, for which corrective measures had to be considered immediately (i.e., 75% classified as OACII+III+IV) were found. Collected data were analyzed in terms of percentage, 2-tail Mann-Whitney U test. Result: Poor postures mainly occur during 'positioning the patient' and 'airway suctioning' in NIC. No difference was found (p=0.060) between the percentage of harmful posture adopted during the patient handling tasks and non-patient handling tasks. Conclusion: This study shows, that in the nursing profession with ICU not only occur during patient handling, but also during other activities. The OWAS method was useful in determining the physical load by locating potential activities due to harmfully working postures, providing a detailed description with analysis, and suggesting successful means to reduce postural load.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.5
• /
• pp.637-644
• /
• 2011

Objective & Background: When applying various evaluation tools that analyze work posture risk through observation, accurate measurement of body flexion angle is very important. Method: This study investigated differences and appropriateness of 5 different existing reference points commonly used in the analysis of the work posture. Twenty five ergonomist and trained professionals were participated in this study. A Same flexion angle was utilized for the evaluation of risk assessment of musculoskeletal disorders using five different reference points to investigate the degree of difference between them. To investigate how different the observers' preferred flexion angle measuring methods were compared to the ISO 11226 Reference Posture, a virtual body model was constructed using the Poser 6.0 program. Six types of body flexion postures were constructed, and since neck flexion differs according to body angle, five types of neck flexion postures were constructed with the trunk bending $20^{\circ}$ forward, making up a total of 30 virtual flexion postures. Results: Results showed that the observers used personally preferred reference points instead of reference points recommend in the evaluation tools. Also the results revealed the their seems to be 6 types of flexion angle for the trunk and 11 types of measurement methods for the neck flexion angle in the form of personally preferred reference points. The results showed that a mean difference of $14^{\circ}$($4{\sim}23^{\circ}$) occurred in the trunk, and a mean difference of $20^{\circ}$($-8{\sim}51^{\circ}$) occurred in the neck. To increase accuracy when using the 5 evaluation tools in combination, the ISO 11226 standards, observers' preferred flexion posture standards, and common flexion posture standards of the evaluation tools were compared with the reference points of the 5 evaluation tools. Results showed considerable variance in angle difference for each evaluation tool. Conclusion: According to the results of this study, considering the angle difference between the flexion angle reference points of the evaluation tool and the reference points selected by the observers, it is concluded that instead of personally preferred reference points, the standardized reference points to enhance the accuracy and the objectivity. Application: The result of this study can be used as reference guide to develop the standardized reference point in the future.