• ETRI Journal
• /
• 제35권3호
• /
• pp.448-458
• /
• 2013

This paper presents a generalized post-processing technique for enhancing the pseudorandomness of digital chaotic oscillators through a nonlinear XOR-based operation with rotation and feedback. The technique allows full utilization of the chaotic output as pseudorandom number generators and improves throughput without a significant area penalty. Digital design of a third-order chaotic system with maximum function nonlinearity is presented with verified chaotic dynamics. The proposed post-processing technique eliminates statistical degradation in all output bits, thus maximizing throughput compared to other processing techniques. Furthermore, the technique is applied to several fully digital chaotic oscillators with performance surpassing previously reported systems in the literature. The enhancement in the randomness is further examined in a simple image encryption application resulting in a better security performance. The system is verified through experiment on a Xilinx Virtex 4 FPGA with throughput up to 15.44 Gbit/s and logic utilization less than 0.84% for 32-bit implementations.

• 센서학회지
• /
• 제24권6호
• /
• pp.368-372
• /
• 2015

In this paper, we proposed a post-processing technique for improving classification performance of electronic nose (E-Nose) system which may be occurred drift signals from sensor array. An adaptive radial basis function network using stochastic gradient (SG) and singular value decomposition (SVD) is applied to process signals from sensor array. Due to drift from sensor's aging and poisoning problems, the final classification results may be showed bias and fluctuations. The predicted classification results with drift are quantized to determine which identification level each class is on. To mitigate sharp fluctuations moving-averaging (MA) technique is applied to quantized identification results. Finally, quantization and some edge correction process are used to decide levels of the fluctuation-smoothed identification results. The proposed technique has been indicated that E-Nose system was shown correct odor identification results even if drift occurred in sensor array. It has been confirmed throughout the experimental works. The enhancements have produced a very robust odor identification capability which can compensate for decision errors induced from drift effects with sensor array in electronic nose system.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2009년도 추계학술발표대회
• /
• pp.345-346
• /
• 2009

The segmentation of vessel including portal vein, hepatic vein and artery, from Computed Tomography (CT) images plays an important role in the therapeutic strategies for hepatic diseases. Representing segmented vessels in three dimensional spaces is extremely useful for doctors to plan liver surgery. In this paper, proposed method is focused on smoothing technique of segmented 3D liver vessels, which derived from 3D region growing approach. A pixel expand algorithm has been developed first to avoid vessel lose and disconnection cased by the next smoothing technique. And then a binary volume filtering technique has been implemented and applied to make the segmented binary vessel volume qualitatively smoother. This strategy uses an iterative relaxation process to extract isosurfaces from binary volumes while retaining anatomical structure and important features in the volume. Hard and irregular place in volume image has been eliminated as shown in the result part, which also demonstrated that proposed method is a suitable smoothing solution for post processing of fine vessel segmentation.

• 한국통신학회:학술대회논문집
• /
• 한국통신학회 1991년도 추계종합학술발표회논문집
• /
• pp.86-91
• /
• 1991

A capability of performing the optical logic and arithmetic operations is followed by an effective encoding technique. In this paper, we proposed the color light encoding technique. By using this encoding technique, the space bandwidth product(SBP) is minimized in the output plane. In addition, we proposed the pre-operation pro-carry processing method that performs faster than the same time operation and carry processing method in optical computing. We proposed that the color liquid crystal device(CLCD) is used as the encoded color light input source.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2021년도 학술발표회
• /
• pp.154-154
• /
• 2021

Since the development of Bubble Image Velocimetry (BIV) technique as the complementary technique of Particle Image Velocimetry (PIV), the application of digital imaging technique in the field of hydraulic and coastal engineering increased rapidly. BIV works very well in multi-phase flow (air-water) flows where the PIV technique doesn't. However, the velocity field obtained from BIV technique often resulted in a velocity vector on the outside of the flow (false velocity) since the Field of View (FOV) usually not only cover the air-water flow but also the area outside the flow. In this study, a simple technique of post processing velocity field was developed. This technique works based on the average of the pixel value in the interrogation area. An image of multi-phase flow of wave overtopping was obtained through physical experiment using BIV technique. The velocity calculation was performed based on the similar method in PIV. A velocity masking technique developed in this study then applied to remove the false velocity vector. Result from non-masking, manually removed and auto removed false velocity vector were presented. The masking technique show a similar result as manually removed velocity vector. This method could apply in a large number of velocity field which is could increase the velocity map post-processing time.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1989년도 가을 학술발표회 논문집
• /
• pp.65-70
• /
• 1989

Until recently post-processing of finite element model has been Heavily relied on expensive graphic peripheral devices. For this reason many engineers and researchers can not afford to access to the graphics. with the aid of inexpensive personal computers very econmical post-processor graphics program called MICRO-POST has been developed in conjunction with low-cost printers and plotters. Model geometry or results of analysis for the unlimitted meshes either produced by mainframe or microcomputer can be easily and economi-call presented in a number of different graphic devices. The paper presents the procedure obtaining the device the independent graphics, and the structure and functions of the program. It also describes a new error-preventive dialogue type input technique to control the plot operation in an interactive manner. Through the post-processing examples for the general purpose finite element programs, it demonstrates the usefulness of the program.

• 대한기계학회논문집A
• /
• 제41권9호
• /
• pp.839-844
• /
• 2017

최근 3차원 프린팅 기술은 비약적으로 발전하여 쾌속조형기술의 대명사가 되고 있다. FDM 방식의 3D프린터는 쾌속조형에 사용되는 가장 일반적인 프린터이지만, 열에 취약하고, 출력물의 표면이 매끄럽지 못하는 등의 문제를 가지고 있다. 본 논문에서는 FDM방식의 3D프린터로 ABS재질의 시편을 제작하였고, 아세톤에 시편을 담그는 방식으로 후처리를 수행하였다. 공정시간을 변수로 후처리를 진행하였으며, 처음 5초의 후처리 시간동안에는 시편의 표면조도가 급격하게 개선되는 결과를 획득하였으며, 5초 이후에는 표면조도의 변화정도가 미미하였다. 또한, 이러한 후처리 공정은 적지만 시편의 인장강도와 파단변형률을 상승시키는 결과를 나타내었다.

• KCI Concrete Journal
• /
• 제12권2호
• /
• pp.3-10
• /
• 2000

A computer program, named NEO-PCBRG, for the analysis and design of prestressed con-crete(PSC) bridges was developed using the finite element method. NEO-PCBRG can predict the response of PSC bridges throughout the various stages of construction and service. NEO-PCBRG has both pre- and post-processing capabilities. Pre-processing refers to all the neces- sary steps required to prepare a virtual prototype, more commonly termed a varied model for analysis. Post-processing here stands for the step in which the results from the analysis are reviewed and interpreted. In order to allow for the easy and convenient execution of the entire procedure, NEO-PCBRG was developed using computer graphics in the Visual Basic pro- gramming language. In conclusion, this study presents a new software architecture for analy-sis using the user-oriented design technique.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.935-940
• /
• 2023

인공지능과 빅데이터 분석을 위해 웹 스크래핑으로 수집된 대부분의 텍스트 데이터들은 일반적으로 대용량이고 비정형이기 때문에 빅데이터 분석을 위해서는 정제과정이 요구된다. 그 과정은 휴리스틱 전처리 정제단계와 후처리 머시인 정제단계를 통해서 분석이 가능한 정형 데이터가 된다. 따라서 본 연구에서는 후처리 머시인 정제과정에서 한국어 딕셔너리와 불용어 딕셔너리를 이용하여 워드크라우드 분석을 위한 빈도분석을 위해 어휘들을 추출하게 되는데 이 과정에서 제거되지 않은 불용어를 효율적으로 제거하기 위한 "사용자 정의 불용어 시소러스" 적용에 대한 방법론을 제안하고 R의 워드클라우드 기법으로 기존의 "불용어 딕셔너리" 방법의 문제점을 보완하기 위해 제안된 "사용자 정의 불용어 시소러스" 기법을 이용한 사례분석을 통해서 제안된 정제방법의 장단점을 비교 검증하여 제시하고 제안된 방법론의 실무적용에 대한 효용성을 제안한다.

• 한국멀티미디어학회논문지
• /
• 제11권12호
• /
• pp.1668-1675
• /
• 2008

In this paper, we propose a post-processing technique developed for the subjective improvement of color resolution in DCT-coded color images. The high frequency components caused by complex object parts are compressed and impaired through DCT-based image processing, so color distortions such as blurs in high saturated regions are observed. It's mainly due to the severe loss of color data as Cb and Cr. Generally, the activities of chroma elements in DCT domain correlate strongly with that of luminance as spatial frequency gets higher, and based on the relations between chroma and luma AC activities, we compensate destructed Cb, Cr coefficients using modifications from Y coefficients. Simulation results show that the proposed method enhances color resolution in high saturated region, and improves the visual quality.