• 수산해양기술연구
• /
• 제39권4호
• /
• pp.251-261
• /
• 2003

기선장에 따른 GPS 위치 정도 및 분포를 측정하기 위하여 2002년 5월 29일부터 6월 2일까지 2대의 GPS수신기 (L1, 12채널)를 이용하여 고정점에서 30분에서 24시간동안 관측하는 실험을 수행하였다. 기준국(PKNU)과 이동, 국립지리원의 GPS 상시관측소에서 수신한 GPS 데이터는 동적 및 정적 후처리방식으로 처리하였으며, 그 결과를 요약하면 다음과 같다. 1. 2002년 5월 31일 차단각 (cut-off angle) $15^{\circ}$에서 6시간 이상 관측 가능한 위성은 16개였고, 위성은 주로 동서방향으로 배치되어 있었다. 10분마다 평균한위성 수와 GDOP는 각각 8개, 3.89이었다. 2. 후처리 전후의 GPS 평균위치는 모두 기준점에서 남서쪽으로 편위 (단독 측위 : 1.17m, 후처리 : 평균 0.43m)되었다. 확율원 오차는 단독 측위가 6.65m이었고 이를 동적 후처리하면 단독 측위의 약 33.8%(표준편차 0=17.2), 정적 후처리하면 단독 측위의 약 5.3% (0=2.2)로 감소시 킬 수 있었다. 3. 정적 후처리방식으로 구한 기선장 x(Km)와 확률원 오차 y(m) 의 관계식은 y = 0.0016x + 0006 $(R^2=0.87)$이었다. 본 연구에서 사용한 1주파용 GPS 수신기를 이용하여 정적 후처리방식으로 위치를 측정하는 경우, 기선장을 100Km 이내로 하고 GPS 수신시간을 30분 이상으로 하면 확율원 오차 20 Cm 이내의 측위가 가능함을 알 수 있었다.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.291-295
• /
• 2006

As GPS equipments improve, one can acquire GPS data easily in the field. However, to obtain precise and accurate coordinates, post processing is additionally required and the processing needs high degree of skills. Besides, it is very common that we can't operate processing software in the field because required system environment is usually not prepared. The aim of this study is the development of internet-based GPS data processing service. For post processing, we use GIPSY developed by JPL. It has many advantages such as precise point positioning, which enables a rapid determination of receiver positions. The developed service in this study proceeds as following orders by interlocking GIPSY and internet service on a Linux platform: Users upload raw data files on the internet, then GIPSY runs automatically and then the user get the result in the field. We use an Apache Web Server as a hosting program and PHP is used in coding web pages.

• 한국군사과학기술학회지
• /
• 제20권4호
• /
• pp.482-490
• /
• 2017

The radar signal processing procedure is divided into the pre-processing such as frequency down converting, down sampling, pulse compression, and etc, and the post-processing such as doppler filtering, extracting target information, detecting, tracking, and etc. The former is generally designed using FPGA because the procedure is relatively simple even though there are large amounts of ADC data to organize very quickly. On the other hand, in general, the latter is parallel processed by multiple DSPs because of complexity, flexibility and real-time processing. This paper presents the radar signal processor design using FPGA which includes not only the pre-processing but also the post-processing such as doppler filtering, bore-sight error, NCI(Non-Coherent Integration), CFAR(Constant False Alarm Rate) and etc.

• 한국공작기계학회논문집
• /
• 제15권3호
• /
• pp.53-58
• /
• 2006

This study deals with the method of post-processing in the automatic tool path generation for 5-axis NC machining. The 5-axis NC machining cannot only cope with the manufacturing of complicated shapes, but also offers numerous advantages such as reasonable tool employment, great reduction of set-up process and so on. Thus 5-axis NC machining has been used for aircraft parts, mold and die as well as for complicated shapes such as impeller, propeller and rotor. However, most of the present CAM systems for 5-axis NC machining have limited functions in terms of tool collision, machine limits and post-processing. Especially 5-axis machine configurations are various according to the method which the rotational axes are adapted with the table and spindle. For that reason, In many cases the optimal numerical control (NC) data cannot be obtained or considerable time is consumed. To solve this problem, we applied a general post-processor for 5-axis NC machining. The validity of this post-processor should be experimentally confirmed by successfully milling to a helix shaped workpiece.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.370-374
• /
• 2005

This study deals with the method of post-processing in the automatic tool path generation for 5-axis NC machining. The 5-axis NC machining cannot only cope with the manufacturing of complicated shapes, but also offers numerous advantages such as reasonable tool employment, great reduction of set-up process and so on. Thus 5-axis NC machining has been used fur aircraft parts, mold and die as well as for complicated shapes such as impeller, propeller and rotor. However, most of the present CAM systems for 5-axis NC machining have limited functions in terms of tool collision, machine limits and post-processing. Especially 5-axis machine configurations are various according to the method which the rotational axes are adapted with the table and spindle. For that reason, in many cases the optimal numerical control (NC) data cannot be obtained or considerable time is consumed. To solve this problem, we applied a general post-processor fur 5-axis NC machining. The validity of this post-processor should be experimentally confirmed by successfully milling to a helix shaped workpiece.

• 대한후두음성언어의학회지
• /
• 제28권2호
• /
• pp.89-95
• /
• 2017

Background and Objectives : High-speed videolaryngoscopy (HSV) is the only technique that captures the true intra-cycle vibratory behavior of the vocal folds by capturing full images of the vocal folds. However, it has problems of no immediate feedback during examination, considerable waiting time for digital kymography (DKG), recording duration limited to a few seconds, and extreme demands for storage space. Herein, we demonstrate a new post-processing method that converts HSV images to two-dimensional digital kymography (2D-DKG) images, which adopts the algorithm of 2D videokymography (2D VKG). Materials and Methods : HSV system was used to capture images of vocal folds. HSV images were post-processed in Kay image-process software (KIPS), and conventional DKG images were retrieved. Custom-made post-processing system was used to convert HSV images to 2D-DKG images. The quantitative parameters of the post-processed 2D-DKG images was validated by comparing these parameters with those of the DKG images. Results : Serial HSV images for all phases of vocal fold vibratory movement are included. The images were converted by the scanning method using U-medical image-process software. Similar to conventional DKG, post-processed 2D DKG image from the HSV image can provide quantitative information on vocal fold mucosa vibration, including the various vibratory phases. Differences in amplitude symmetry index, phase symmetry index, open quotient, and close quotient between 2D-DKG and DKG were analyzed. There were no statistical differences between the quantitative parameters of vocal fold vibratory movement in 2D-DKG and DKG. Conclusion : The post-processing method of converting HSV images to 2D DKG images could provide clinical information and storage economy.

• 한국식품영양학회지
• /
• 제30권6호
• /
• pp.1260-1267
• /
• 2017

The properties of rice were studied on five rice cultivars (Ilpumbyeo, Samkwang, Goami-4, Dodamssal, and Thai rice), and employed two kinds of saccharification treatment methods (treatment I : rice shape, treatment II: grinding rice shape). Thai rice showed differences in width and length when compared to other cultivars of rice, and the Goami 4 had the lowest thousand-grain weight. The Goami4 and Dodamssal each showed high contents of amylose and resistant starch, and the water absorption rate was close to maximum at 90 minutes as well as the highest level of Goami 4 at all times. The qualities of highest water-binding capacity, solubility and swelling power was most significant in Thai rice. The lowest hardness level of wet rice resulted in the lowest hydration-related characteristics. High amylose content rice, in particular, showed low sugar content and slightly increased sugar content as the saccharification process improved (treatment II). On the other hand, high amylose cultivars had the same high degree of hardness as boiled rice. From these results, the Dodamssal was found to have the lowest viscosity at all temperatures but highest viscosity during the saccharification process, suggesting it may be successfully implemented as a thickener in rice beverage processing. The purpose of this study was to attempt to provide basic data on the development of rice beverage manufacturing technology, based upon the quality characteristics related to beverage processing of rice cultivars.

• 보존과학회지
• /
• 제38권1호
• /
• pp.14-32
• /
• 2022

Underwater photographing and image recording are essential for pre-excavation survey and during excavation in underwater archaeology. Unlike photographing on land, all underwater images suffer various quality degradations such as shape distortions, color shift, blur, low contrast, high noise levels and so on. Outcome is very often heavily photographing equipment and photographer dependent. Excavation schedule, weather conditions, and water conditions can put burdens on divers. Usable images are very limited compared to the efforts. In underwater archaeological study in very turbid water such as in the Yellow Sea (between mainland China and the Korean peninsula), underwater photographing is very challenging. In this study, off-site image distortion and color compensation techniques using an image processing/analysis software is investigated as an alternative image quality enhancement method. As sample images, photographs taken during the excavation of 800-year-old Taean Mado Shipwrecks in the Yellow Sea in 2008-2010 were mainly used. Significant enhancement in distortion and color compensation of archived images were obtained by simple post image processing using image processing/analysis software (PicMan) customized for given view ports, lenses and cameras with and without optical axis offsets. Post image processing is found to be very effective in distortion and color compensation of both recent and archived images from various photographing equipment models and configurations. Merits and demerit of in-situ, distortion and color compensated photographing with sophisticated equipment and conventional photographing equipment, which requires post image processing, are compared.

• 문화기술의 융합
• /
• 제9권6호
• /
• pp.935-940
• /
• 2023

인공지능과 빅데이터 분석을 위해 웹 스크래핑으로 수집된 대부분의 텍스트 데이터들은 일반적으로 대용량이고 비정형이기 때문에 빅데이터 분석을 위해서는 정제과정이 요구된다. 그 과정은 휴리스틱 전처리 정제단계와 후처리 머시인 정제단계를 통해서 분석이 가능한 정형 데이터가 된다. 따라서 본 연구에서는 후처리 머시인 정제과정에서 한국어 딕셔너리와 불용어 딕셔너리를 이용하여 워드크라우드 분석을 위한 빈도분석을 위해 어휘들을 추출하게 되는데 이 과정에서 제거되지 않은 불용어를 효율적으로 제거하기 위한 "사용자 정의 불용어 시소러스" 적용에 대한 방법론을 제안하고 R의 워드클라우드 기법으로 기존의 "불용어 딕셔너리" 방법의 문제점을 보완하기 위해 제안된 "사용자 정의 불용어 시소러스" 기법을 이용한 사례분석을 통해서 제안된 정제방법의 장단점을 비교 검증하여 제시하고 제안된 방법론의 실무적용에 대한 효용성을 제안한다.

• 한국산업정보학회논문지
• /
• 제7권3호
• /
• pp.74-80
• /
• 2002

한국어 연속 음성 인식결과의 성능향상을 위해서 자연어 처리 기술을 이용한 후처리 기법이 사용된다. 그러나 자연어 처리 기법이 대부분 띄어쓰기가 있는 정형화된 입력 문장에 대한 분석을 수행하여 왔기 때문에 형태소 분석기를 직접 음성인식 결과의 향상에 사용하는 데에는 어려운 점이 많다. 본 논문에서는 띄어쓰기를 고려하지 않는 기능어 기반의 최장일치 형태소 해석 방법인 구문 형태소 단위의 분석을 이용한 음정인식 결과의 향상 모델을 제안한다. 제안된 모델을 통해 연속음성 인식 결과에서 자주 발생하는 용언과 보조 용언 및 의존 명사 사이의 음운들 사이의 구조적 정보를 활용함으로써 음성 인식 결과의 성능을 향상시키는 방법에 대해 기술한다.