• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.310-315
• /
• 1993

The effects of RT A treatment on the breakdown strengths were studied for tantalum pentoxide(${Ta_2}{O_5}$) films prepared by thermal oxidation of dc-sputtered Ta(400$\AA$) on p-type (100) Si wafer. While the relative dielectric constants of the RT A -treated specimens were not remarkably affected, the breakdown strengths of the RTA-treated specimens were greatly changed by RTA temperature and time. After the RTA treatment, the breakdown strengths of the specimens RTA-treated at the temperature below the crystallization temperature were increased to 5.4MV /cm, while those of the specimens RTA -treated at the temperature above it were decreased to 0.5MV /cm. RTA time-independence of the flat-bant voltage shift refleted that the RT A post-annealing effects on the breakdown strengths were not due to the interface reaction between the ${Ta_2}{O_5}$ layer and the Si substrate but, through the RBS analysis, to densification of the ${Ta_2}{O_5}$ films.

• Food Science of Animal Resources
• /
• v.22 no.3
• /
• pp.222-227
• /
• 2002

Efficacy of submersion aging in chilled water of vacuum-packed Hanwoo beef was investigated. At 24 hours post-mortem, the somimemebranosus portion of Hanwoo carcass was excised and sliced (2.5cm, thickness). After beef core samples(6$\textrm{cm}^2$${\times}$2cm) were prepared and vacuum packed, the samples were randomly assigned to the four treatments which were conventional refrigerator at 4$^{\circ}C$(control), conventional refrigerator at 1$^{\circ}C$(T1), submersion in chilled water at 4$^{\circ}C$(T2) and submersion in chilled water at 1$^{\circ}C$(T3). Samples were stored for 3, 7, 10 and 14 days to measure meat color(CIE L*, a*, b*), deoxymyoglobin, oxymyoglobin and metmyoglobin percentage, thiobarbituric acid reactive substance (TBARS) value, purge loss(%) and total heam pigment content. CIE a* value of samples was not significantly changed by treatment during the storage. However, metmyoglobin content of T2 samples was significantly (p<0.05) lower than those of control and T1,T3 during storage. Also, TBARS value of T3 samples was significantly (p<0.05) lower than those of control and T2 samples. T3 showed the lowest purge loss%, whereas control remarked the highest purge loss(%). Total heam pigment of all samples were not significantly changed during the storage. These results suggested that submersion aging in chilled water could keep the myoglobin stability and reduce lipid oxidation and purge loss of vacuum packed beef during storage.

• Electrical & Electronic Materials
• /
• v.16 no.9
• /
• pp.65.1-65
• /
• 2003

The interface of zirconium oxide thin films on silicon is analyzed in detail for their potential applications in the microelectronics. The formation of an interfacial layer of ZrSi$\sub$x/O$\sub$y. with graded Zr concentration is observed by the x-ray photoelectron spectroscopy and secondary ion mass spectrometry analysis. The as-deposited ZrO$_2$/ZrSi$\sub$x/O$\sub$y//Si sample is thermally stable up to 880$^{\circ}C$, but is less stable compared to the ZrO$_2$/SiO$_2$/Si samples. Post-deposition annealing in oxygen or ammonia improved the thermal stability of as-deposited ZrO$_2$/ZrSi$\sub$x/O$\sub$y/Si to 925$^{\circ}C$, likely due to the oxidation/nitridation of the interface. The as-deposited film had an equivalent oxide thickness of∼13 nm with a dielectric constant of ∼21 and a leakage current of 3.2${\times}$10e-3 A/$\textrm{cm}^2$ at 1.5V. Upon oxygen or ammonia annealing, the formation of SiO$\sub$x/ and SiH$\sub$x/N$\sub$y/O$\sub$z/ at the interface reduced the overall dielectric constants.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.10 s.181
• /
• pp.2597-2602
• /
• 2000

The most effective means of evaluating remaining life is through the creep testing of samples removed from the component. But sampling of large specimen from in-service component is actually impossible. So, sampling device and small-specimen creep tester have been applied. Sampling device has been devised to extract mechanically small samples by hemispherical, diamond -coated cutter from the surface of turbine rotor bores and thick-walled pipes without subsequent weld repairs requiring post weld heat treatment. A method of manufacturing small creep specimen, 2min gage diameter and 10min gage length, using electron beam welding to attach grip section, has been proven. Small-specimen creep tester has been designed to control atmosphere to prevent stress increment by oxidation during experiment. To determine whether the small specimens successfully reproduce the behavior of large specimens, creep rupture tests for small and large specimens have been performed at identical conditions. Creep rupture times based on small specimens have closely agreed within 5% error compared with that of large specimen. The errors in rupture time have decreased at longer test period. This comparison validates the procedure for fabricating and testing on small specimen. This technique offers potential as an efficient method for remaining life assessment by direct sampling from in -service high temperature components.

• Environmental Engineering Research
• /
• v.25 no.4
• /
• pp.588-596
• /
• 2020

This study was carried out to increase the treatment efficiency through the improvement of the conventional biological process, and to propose the optimal treatment direction. The optimal treatment conditions were derived based on the results of the spike damage tests in each single process. The removal efficiency of micropharmaceuticals was further increased when an ozone treatment process was added to the biological process compared to the single process. The soil and activated carbon adsorption process was introduced in the post-treatment to remove the micropharmaceutical residues, and the removal efficiency of the pharmaceduticals in the final effluent was more than 85% in spike damage experiment. In particular, the continuous process of biological treatment-ozone-adsorption could ensure the stable treatment of micropharmaceuticals, which had not been efficiently removed in the single process, as it showed more than 80% removal efficiency. Therefore, it is expected that the addition of the ozone oxidation and activated carbon adsorption process to the existing sewage treatment facilities can contribute to the efficient removal of micropharmaceuticals.

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.242-242
• /
• 2002

Two MIMAS MaX fuel rods base-irradiated in a commercial PWR have been reinstrumented and irradiated at a test reactor. The fabrication data for two MOX roda are characterized together with base irradiation information. Both Rods were reinstrumented to be fitted with thermocouple to measure centerline temperature of fuel. One rod was equipped with pressure transducer for rod internal pressure whereas the other with cladding elongation detector. The post irradiation examinations for various items were performed to determine fuel and cladding in-pile behavior after base irradiation. By using well characterized fabrication and re-instrumentation data and power history, the fuel performance code, COSMOS, is verified with measured in-pile and PIE information. The COMaS code shows good agreement for the cladding oxidation and creep, and fission gas release when compared with PIE dad a after base irradiaton. Based on the re-instrumention information and power history measured in-pile, the COSMOS predicts re-instrumented in-pile thermal behaviour during power up-ramp and steady operation with acceptable accuracy. The rod internal pressure is also well simulated by COSMOS code. Therfore, with all the other verification by COSMOS code up to now, it can be concluded that COSMOS fuel performance code is applicable for the design and license for MaX fuel rods up to high burnup.

• Current Photovoltaic Research
• /
• v.2 no.3
• /
• pp.110-114
• /
• 2014

We propose a low temperature sol-gel ZnO/Ag nanowire composite thin film to fulfill low temperature and low cost requirements, which are essential criteria in future flexible electronic devices. In this proposed thin film, Ag nanowire plays the role of electrical conduction, and sol-gel ZnO provides a structural medium with a high visible transmittance. Low temperature restriction in the sol-gel fabrication process prevents sufficient oxidation of Zn acetate precursors, which were solved by a post-coating treatment with ultraviolet light irradiation. Composite thin film formation was performed by spin coating methods with a mixed precursor solution or in a sequential manner. We obtained an average visible transmittance larger than 85% and a sheet resistance smaller than $50{\Omega}/sq$. After optimization in a fabricated composite transparent conductive thin film with the thickness around 100 nm. Similar experimental demonstration in a flexible substrate (polyethyleneterephthalate) was successful, which implies a promising application opportunity of this technology.

• Journal of the Korean Chemical Society
• /
• v.55 no.4
• /
• pp.620-625
• /
• 2011

A simple, rapid potentiometric back titration of Isoniazid (INH) in the presence of Rifampicin (RIF) in tablets and syrups is described. The method is based on the oxidation of INH by a known excess of copper (II) ion and the back titration of unreacted copper (II) ion potentiometrically with ascorbic acid using a lab-made Copper Based Mercury Film Electrode (CBMFE). The titration conditions have been optimized for the determination of 1.0-10.0 mg of INH in pure and dosage forms. The precision and accuracy of the method have been assessed by the application of lack-of-fit test and other statistical methods. Interference was not caused by RIF and other excipients present in dosage forms. Application of the method for INH assay in tablets and syrups was validated by comparison of the results of proposed method with that of the British Pharmacopoeia (BP) method using F- and t- statistical tests of significance.

• Journal of the Korean Society of Safety
• /
• v.29 no.4
• /
• pp.23-27
• /
• 2014

The use of electromagnetic energy and non-equilibrium plasma for enhancing ignition and combustion stability is receiving increased attention recently. The conventional technologies have adapted the electrical devices to make the electromagnetic field, which resulted in various safety issues such as high-maintenance, additional high-cost system, electric shock and explosion. Therefore, an electrodeless microwave technology has an advantage for economic and reliability compared with conventional one because of no oxidation. However, the application of microwave has been still limited because of lack of interaction mechanism between flame and microwave. In this study, an experiment was performed with jet diffusion flames induced by microwaves to clarify the effect of microwave on the combustion stability and pollutant emissions. The results show that microwave induced flames enhanced the flame stability and blowout limit because of abundance of radical pool. However, NOx emission was increased monotonically with microwave intensity except 0.2 kW, and soot emission was reduced at the post flame region.

• Journal of Sensor Science and Technology
• /
• v.19 no.3
• /
• pp.176-183
• /
• 2010

It is considered that the urea injection DeNOx SCR(selective catalytic reduction) system is the only promising method to satisfy the worldwide NOx emission standards. As for the theoretical aspect, reactants of NO and $NO_2$ with $NH_3$ produce $H_2O$, $N_2$ and $O_2$ which do not harm human beings and environmental as well. The realization of maximum NOx conversion (without using a post oxidation catalyst) is only possible with closed loop controlled urea dosing. It means built-in $NH_3$ gas sensor have to be developed for detecting accurate $NH_3$ concentration for the feedback system. Using YSZ(yttria-stabilized zirconia) as a solid state electrolyte and $In_2O_3$ as a sensing material, this paper aims to study dependable $NH_3$ gas sensor for the promising solution of DeNOx technology, which have a reproducible electric output signal, a high sensitivity and fast response.