• 제목/요약/키워드: Post-oxidation

검색결과 204건 처리시간 0.03초

CNG 버스용 NGOC+LNT+SCR 촉매시스템의 특성 (Characteristics of Catalysts System of NGOC-LNT-SCR for CNG Buses)

  • 서충길
    • 한국산학기술학회논문지
    • /
    • 제20권4호
    • /
    • pp.626-631
    • /
    • 2019
  • 친환경자동차의 보급 확대를 위한 정책수립과 기술개발이 지속적으로 이루어지고 있는 실정이나 아직까지도 내연기관이 차지하는 비중은 약 95% 차지하고 있다. 화석연료를 기반으로 하는 내연기관의 엄격한 배기가스규제를 충족시키기 위해 자동차와 선박용 후처리장치의 비중이 점차로 증가하고 있다. 이 연구는 CNG 버스의 post Euro-VI 배기대응을 위한 기초연구로써, Pd 대체 전이금속 영향, 촉매 체적 영향 그리고 공간속도에 따른 기초 특성을 파악하는 것이다. 촉매는 제조되었고 모델가스반응장치로 실험하였다. 3Pd가 포함된 NGOC 촉매는 $300^{\circ}C$에서 22%, $350^{\circ}C$에서 48% 그리고 $500^{\circ}C$에서 약 75%의 $CH_4$ 저감 능력을 나타내며 촉매 활성이 가장 높았다. 전이금속 3wt%가 포함된 3Co NGOC는 산화능력이 우수한 물질로써, 2nm급의 작은 사이즈로 촉매 분산도가 향상되어 de-NO/CO 전환율이 높았다. NGOC+LNT+SCR 촉매시스템의 체적은 $De-CH_4/NOx$ 성능과 촉매비용을 고려할 때 Total score가 165를 나타낸 1.5+0.5+0.5 조합이 최적이었다. SV $14,000h^{-1}$일 경우 $CH_4$ 저감 성능은 약 20% 수준으로 가장 높았고, SV $56,000h^{-1}$의 경우가 약 5% 수준으로 가장 낮았다. 공간속도가 작으면 유속이 감소하여 촉매 체적에 잔류하는 시간이 길어지므로 유해가스가 저감되었기 때문이다.

The effect of aging on the quality of Semimembranosus muscle from Hanwoo

  • Kim, Sun Hyo;Kim, Hyun Joo;Lee, Hyun Jung;Yong, Hae In;Jo, Cheorun;Nam, Ki Chang;Jung, Samooel
    • 농업과학연구
    • /
    • 제43권1호
    • /
    • pp.61-71
    • /
    • 2016
  • The effect of postmortem aging on the quality of Semimembranosus muscle (SM) from Hanwoo was investigated. The quality of SM was compared with that of Longissimus dorsi muscle (LD). SM contained higher moisture, protein, and ash, and lower fat than LD (p<0.05). The $a^*$ and $b^*$ values of SM were significantly decreased after 21 days of aging. SM showed higher $a^*$ values than LD at 1 and 7 day of aging (p<0.05). The cooking loss of SM was not affect by aging. SM had higher cooking loss than that of LD throughout the aging period. Although the shear force of SM was significantly decreased by aging, SM showed high shear force compared to LD during aging period (p<0.05). Aging increased lipid oxidation in both muscles (p<0.05). However, TBARS value of SM was significantly lower than that of LD throughout the aging period (p<0.05). There was no effect of aging on the betaine and L-carnitine contents of SM. SM contained higher betaine and L-carnitine than LD in all aging days (p<0.05). Therefore, we concluded that consumer acceptability of SM could be increased by aging based on the increase of tenderness in addition to its high nutritional properties.

Rapid Discoloration of Aged Beef Muscles after Short-Term/Extreme Temperature Abuse during Retail Display

  • Kim, Hyun-Wook;Setyabrata, Derico;Choi, Yun-Sang;Kim, Yuan H. Brad
    • 한국축산식품학회지
    • /
    • 제36권3호
    • /
    • pp.343-351
    • /
    • 2016
  • The objective of this study was to evaluate the effects of a short-term/extreme temperature abuse (STA) on color characteristics and oxidative stability of aged beef muscles during simulated retail display. Two beef muscles (longissimus lumborum, LL and semitendinosus, ST) were aged for 7 (A7), 14 (A14), 21 (A21), and 28 d (A28), and further displayed at 2℃ for 7 d. The STA was induced by placing steak samples at 20℃ for 1 h on the 4th d of display. Instrumental and visual color evaluations, ferric ion reducing capacity (FRC) and 2-thiobarbituric acid reactive substances (TBARS) assay were performed. Initially, redness, yellowness and hue angle of all beef muscles were similar, regardless of aging time before display (p>0.05). An increase in postmortem aging time increased lipid oxidation and caused a rapid discoloration after STA during display (p<0.05). ST muscle was more sharply discolored and oxidized after STA, when compared to LL muscle (p<0.05). The FRC value of beef muscles was decreased after 7 d of display (p<0.05). The results from the current study indicate adverse impacts of postmortem aging on color and oxidative stabilities of beef muscles, particularly under temperature abusing conditions during retail display. Thus, developing a specific post-harvest strategy to control quality attributes in retail levels for different muscle types and aging conditions would be required.

Thermal Stability Enhanced Ge/graphene Core/shell Nanowires

  • 이재현;최순형;장야무진;김태근;김대원;김민석;황동훈;;황성우;황동목
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
    • /
    • pp.376-376
    • /
    • 2012
  • Semiconductor nanowires (NWs) are future building block for nano-scale devices. Especially, Ge NWs are fascinated material due to the high electrical conductivity with high carrier mobility. It is strong candidate material for post-CMOS technology. However, thermal stability of Ge NWs are poor than conventional semiconductor material such as Si. Especially, when it reduced size as small as nano-scale it will be melted around CMOS process temperature due to the melting point depression. Recently, Graphene have been intensively interested since it has high carrier mobility with single atomic thickness. In addition, it is chemically very stable due to the $sp^2$ hybridization. Graphene films shows good protecting layer for oxidation resistance and corrosion resistance of metal surface using its chemical properties. Recently, we successfully demonstrated CVD growth of monolayer graphene using Ge catalyst. Using our growth method, we synthesized Ge/graphene core/shell (Ge@G) NW and conducted it for highly thermal stability required devices. We confirm the existence of graphene shell and morphology of NWs using SEM, TEM and Raman spectra. SEM and TEM images clearly show very thin graphene shell. We annealed NWs in vacuum at high temperature. Our results indicated that surface melting phenomena of Ge NWs due to the high surface energy from curvature of NWs start around $550^{\circ}C$ which is $270^{\circ}C$ lower than bulk melting point. When we increases annealing temperature, tip of Ge NWs start to make sphere shape in order to reduce its surface energy. On the contrary, Ge@G NWs prevent surface melting of Ge NWs and no Ge spheres generated. Furthermore, we fabricated filed emission devices using pure Ge NWs and Ge@G NWs. Compare with pure Ge NWs, graphene protected Ge NWs show enhancement of reliability. This growth approach serves a thermal stability enhancement of semiconductor NWs.

  • PDF

Quality of Frozen Pork from Pigs Fed Diets Containing Palm Kernel Meal as an Alternative to Corn Meal

  • An, Jeong Yeon;Yong, Hae In;Kim, So Yeon;Yoo, Han Bit;Kim, Yoo Yong;Jo, Cheorun
    • 한국축산식품학회지
    • /
    • 제37권2호
    • /
    • pp.191-199
    • /
    • 2017
  • The objective of this study was to evaluate the effect of different levels of palm kernel meal (PKM), an alternative to corn, on the quality of pork. A total of 72 crossbred pigs ([Yorkshire ${\times}$ Landrace] ${\times}$ Duroc) were assigned into four dietary treatments (PKM level of 0, 4, 8, or 12%). After 12 wk, one pig of median weight in each pen was selected and slaughtered to analyze meat quality. The color, free radical scavenging activity, lipid oxidation, texture, composition of fatty acids, and sensory qualities of pork loin were evaluated post slaughter. When the levels of PKM in the diet increased, the $L^*$-value of pork loin decreased, whereas $a^*$-value and total saturated fatty acids increased. 2-Thiobarbituric acid reactive substance (TBARS) values of pork loin were lower in groups treated with 8 and 12% PKM than in the control group at day 0; this difference, however, was not observed at day 3 and 7. The results of texture analysis showed that increasing the PKM ratio decreased hardness, chewiness, and springiness at day 7. The sensory test, however, indicated no differences between the control and treated groups. These findings show that finisher pigs could tolerate PKM as a replacement for corn; PKM did not negatively affect the quality of pork, indicating that it can be utilized as feed.

Atomic layer chemical vapor deposition of Zr $O_2$-based dielectric films: Nanostructure and nanochemistry

  • Dey, S.K.
    • E2M - 전기 전자와 첨단 소재
    • /
    • 제16권9호
    • /
    • pp.64.2-65
    • /
    • 2003
  • A 4 nm layer of ZrOx (targeted x-2) was deposited on an interfacial layer(IL) of native oxide (SiO, t∼1.2 nm) surface on 200 mm Si wafers by a manufacturable atomic layer chemical vapor deposition technique at 30$0^{\circ}C$. Some as-deposited layers were subjected to a post-deposition, rapid thermal annealing at $700^{\circ}C$ for 5 min in flowing oxygen at atmospheric pressure. The experimental x-ray diffraction, x-ray photoelectron spectroscopy, high-resolution transmission electron microscopy, and high-resolution parallel electron energy loss spectroscopy results showed that a multiphase and heterogeneous structure evolved, which we call the Zr-O/IL/Si stack. The as-deposited Zr-O layer was amorphous $ZrO_2$-rich Zr silicate containing about 15% by volume of embedded $ZrO_2$ nanocrystals, which transformed to a glass nanoceramic (with over 90% by volume of predominantly tetragonal-$ZrO_2$(t-$ZrO_2$) and monoclinic-$ZrO_2$(m-$ZrO_2$) nanocrystals) upon annealing. The formation of disordered amorphous regions within some of the nanocrystals, as well as crystalline regions with defects, probably gave rise to lattice strains and deformations. The interfacial layer (IL) was partitioned into an upper Si $o_2$-rich Zr silicate and the lower $SiO_{x}$. The latter was sub-toichiometric and the average oxidation state increased from Si0.86$^{+}$ in $SiO_{0.43}$ (as-deposited) to Si1.32$^{+}$ in $SiO_{0.66}$ (annealed). This high oxygen deficiency in $SiO_{x}$ indicative of the low mobility of oxidizing specie in the Zr-O layer. The stacks were characterized for their dielectric properties in the Pt/{Zr-O/IL}/Si metal oxide-semiconductor capacitor(MOSCAP) configuration. The measured equivalent oxide thickness (EOT) was not consistent with the calculated EOT using a bilayer model of $ZrO_2$ and $SiO_2$, and the capacitance in accumulation (and therefore, EOT and kZr-O) was frequency dispersive, trends well documented in literature. This behavior is qualitatively explained in terms of the multi-layer nanostructure and nanochemistry that evolves.ves.ves.

  • PDF

VARIATION OF NEUTRON MODERATING POWER ON HDPE BY GAMMA RADIATION

  • Park, Kwang-June;Ju, June-Sik;Kang, Hee-Young;Shin, Hee-Sung;Kim, Ho-Dong
    • Journal of Radiation Protection and Research
    • /
    • 제34권1호
    • /
    • pp.9-14
    • /
    • 2009
  • High density polyethylene (HDPE) is degraded due to a radiation-induced oxidation when it is used as a neutron moderator in a neutron counter for a nuclear material accounting of spent fuels. The HDPE exposed to the gamma-ray emitted from the fission products in a spent nuclear fuel results in a radiation-induced degradation which changes its original molecular structure to others. So a neutron moderating power variation of HDPE, irradiated by a gamma radiation, was investigated in this work. Five HDPE moderator structures were exposed to the gamma radiation emitted from a $^{60}Co$ source to a level of $10^5-10^9$ rad to compare their post-irradiation properties. As a result of the neutron measurement test with 5 irradiated HDPE structures and a neutron measuring system, it was confirmed that the neutron moderating power for the $10^5$ rad irradiated HDPE moderator revealed the largest decrease when the un-irradiated pure one was used as a reference. It implies that a neutron moderating power variation of HDPE is not directly proportional to the integrated gamma dose rate. To clarify the cause of these changes, some techniques such as a FTIR, an element analysis and a densitometry were employed. As a result of these analyses, it was confirmed that the molecular structure of the gamma irradiated HDPEs had partially changed to others, and the contents of hydrogen and oxygen had varied during the process of a radiation-induced degradation. The mechanism of these changes cannot be explained in detail at present, and thus need further study.

미국 인디아나주 Friar Tuck 폐탄광의 수리지질 및 수질 (Hydrogeology and Water Chemistry of the Friar Tuck Abandoned Coal Mine Site, Indiana, USA)

  • Park, Jung-Chan
    • 대한지하수환경학회지
    • /
    • 제3권2호
    • /
    • pp.70-79
    • /
    • 1996
  • Friar Turk 폐탄광은 미국중서부의 가장복잡하게 교란된 광산 중의 하나이다. 버럭 및 광미 속에는 고농도의 황철석이 함유되어 있고, 황철석의 산화작용에 의해 토양 및 물이 산성화되고 식물의 성장이 제한되고 있다. 복구기술들에 대한 효과를 정량적으로 평가하기 위한 노력으로, 상세한 관측프로그램이 수행되었다. 물 시료들은 지표수, 지하수 및 불포화대의 간극수에서 5년간에 걸쳐 채취되었다. 그 결과에 의하면, spoil은 미약한 물 오염원이고, 버럭 더미는 지표수 및 지하수를 심각하게 오염시키는 원천이다. 그러나 버럭 더미 하부에 분포하는 loess 및 till은 오염된 물이 이동하는 것을 효과적으로 억제하였다. 버럭 더미 및 광미 표면층들은 수십 년간에 걸쳐 풍화된 결과로 층 내부보다는 독성이 약하였다. 산성광산폐수의 생성은 정점에 달한 상태이며 잠재적인 산성층은 아마도 광산폐기물의 불포화대에 분포하는 것으로 사료된다.

  • PDF

Determination of trace bromate in various water samples by direct-injection ion chromatography and UV/Visible detection using post-column reaction with triiodide

  • Kim, Jungrae;Sul, Hyewon;Song, Jung-Min;Kim, Geon-Yoon;Kang, Chang-Hee
    • 분석과학
    • /
    • 제33권1호
    • /
    • pp.42-48
    • /
    • 2020
  • Bromate is a disinfection by-product generated mainly from the oxidation of bromide during the ozonation and disinfection process in order to remove pathogenic microorganism of drinking water, and classified as a possible human carcinogen by International Agency for Research of Cancer (IARC) and World Health Organization (WHO). For the purpose of determining the trace level concentration of bromate, several sensitive techniques are applied mostly based on suppressed conductivity detection and UV/Visible detection after postcolumn reaction (PCR). In this study, the suppressed conductivity detection method and the PCR-UV/Visible detection method through the triiodide reaction were compared to analyze the trace bromate in water samples and estimated for the availability of these analytical methods. In addtion, the state-of-the-art techniques was applied for the determination of trace level bromate in various water matrices, i.e., soft drinking water, hard drinking water, mineral water, swimming pool water, and raw water. In comparison of two analytical methods, it was found that the conductivity detection had the suitable advantage to simultaneously analyze bromate and inorganic anions, however, the bromate might not be precisely quantified due to the matrix effect especially by chloride ion. On the other hand, the trace bromate was analyzed effectively by the method of PCR-UV/Visible detection through triiodide reaction to satisfactorily minimize the matrix interference of chloride ion in various water samples, showing the good linearity and reproducibility. Furthermore, the method detection limit (MDL) and recovery were 0.161 ㎍/L and 101.0-108.1 %, respectively, with a better availability compared to conductivity detection.

MOS 소자를 위한 $HfO_3$게이트 절연체와 $WSi_2$게이트의 집적화 연구 (Investigation of $WSi_2$ Gate for the Integration With $HfO_3$gate oxide for MOS Devices)

  • 노관종;양성우;강혁수;노용한
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2001년도 하계학술대회 논문집
    • /
    • pp.832-835
    • /
    • 2001
  • We report the structural and electrical properties of hafnium oxide (HfO$_2$) films with tungsten silicide (WSi$_2$) metal gate. In this study, HfO$_2$thin films were fabricated by oxidation of sputtered Hf metal films on Si, and WSi$_2$was deposited directly on HfO$_2$by LPCVD. The hysteresis windows in C-V curves of the WSi$_2$HfO$_2$/Si MOS capacitors were negligible (<20 mV), and had no dependence on frequency from 10 kHz to 1 MHz and bias ramp rate from 10 mV to 1 V. In addition, leakage current was very low in the range of 10$^{-9}$ ~10$^{-10}$ A to ~ 1 V, which was due to the formation of interfacial hafnium silicate layer between HfO$_2$and Si. After PMA (post metallization annealing) of the WSi$_2$/HfO$_2$/Si MOS capacitors at 500 $^{\circ}C$ EOT (equivalent oxide thickness) was reduced from 26 to 22 $\AA$ and the leakage current was reduced by approximately one order as compared to that measured before annealing. These results indicate that the effect of fluorine diffusion is negligible and annealing minimizes the etching damage.

  • PDF