• International Journal of Aeronautical and Space Sciences
• /
• 제14권2호
• /
• pp.140-145
• /
• 2013

The development of high performance fabrics have advanced body armor technology and improved ballistic performance while maintaining flexibility. Utilization of the shear thickening phenomenon exhibited by Shear Thickening Fluids (STF) has allowed further enhancement without hindering flexibility of the fabric through a process of impregnation. The effect of STF impregnation on the ballistic performance of fabrics has been studied for impact velocities below 700 m/s. Studies of STF-impregnated fabrics for high velocity impacts, which would provide a transition to significantly higher velocity ranges, are lacking. This study aims to investigate the effect of STF impregnation on the high velocity impact characteristics of Kevlar fabric by effectively dispersing silica nanoparticles in a suspension, impregnating Kevlar fabrics, and performing high velocity impact experiments with projectile velocities in the range of 1 km/s to compare the post impact characteristics between neat Kevlar and impregnated Kevlar fabrics. 100 nm diameter silica nanoparticles were dispersed using a homogenizer and sonicator in a solution of polyethylene glycol (PEG) and diluted with methanol for effective impregnation to Kevlar fabric, and the methanol was evaporated in a heat oven. High velocity impact of STF-impregnated Kevlar fabric revealed differences in the post impact rear formation compared to neat Kevlar.

• 한국주조공학회지
• /
• 제42권4호
• /
• pp.218-225
• /
• 2022

본 연구에서는 고압 다이캐스팅 (High pressure die-casting, HPDC)을 통해 알루미늄 합금 (상업코드: ALDC12종)으로 수소 자동차용 부품 (Air pressure control valve housing, APCVH)을 제조하였으며 주조품의 기밀성을 향상시키기 위해 유기 함침액을 개발하였다. 개발된 2종류의 유기 함침액 (INNO-series, 한국)과 상용 합침액 (P601, 일본)을 사용하여 함침공정 조건 및 후 처리에 따른 미세결함과 기밀성을 비교 평가하였다. 컴퓨터 단층촬영 및 3차원 X-선 현미경 분석을 통해 함침된 알루미늄 주조품의 결함제어 및 성능 개선을 확인하였다. 또한, 함침 공정 후 기밀성 시험에서 INNO-01이 함침된 시료의 경우 성능 개선율이 70%인 것으로 확인하였다. 따라서, 개발된 유기 함침액은 상용 가능하며 다이캐스팅 제품의 기밀성 향상에 도움이 될 것으로 판단된다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권2호
• /
• pp.103-110
• /
• 2020

본 연구는 바인더젯 3D 프린팅 출력물의 강도증진을 위하여 진공함침 후처리 공정의 적용성을 검토하였다. 또한, 출력물 크기에 따른 강도발현 한계를 확인하기 위하여 10 mm, 20 mm, 30 mm 및 40 mm 큐빅 출력물을 대상으로 침투성, 부피밀도 및 압축강도를 확인하였다. 그 결과, 진공함침 후처리 공정에서 최대압력이 증가함에 따라 후처리 용액이 출력물 내부까지 침투하게 되고 이에 따라서 침투면적률이 개선되는 것을 확인하였다. 출력물 압축강도율과 후처리 용액 침투면적률은 보정결정계수 0.992의 지수함수 형태의 상관관계를 나타내고 있다. 또한, 부피밀도가 증가하였으며 이는 후처리 용액이 내부까지 침투한 것으로 유추할 수 있다. 결론적으로 바인더젯 3D 프린팅 출력물의 강도증진을 위해서는 출력물 내부까지 후처리 용액을 침투하는 것이 필수적이며, 이를 위한 유효한 방법으로써 진공함침을 제안한다.

• Bulletin of the Korean Chemical Society
• /
• 제29권12호
• /
• pp.2434-2440
• /
• 2008

The effect of sodium (Na) promotion was studied in the biphenol (BP) hydrogenation using various Pd/C catalysts. Different amounts of sodium metal were used for promotion with Pd/C and their effects on BP hydrogenation were observed. The promotion order was changed to compare the effect of the position of the promoter in relation to the palladium (Pd) metal on the catalytic activity and yield of the final product, bicyclohexyl-4,4'-diol (BHD). Pd/C catalysts prepared from different methods were also sodium-promoted and the changes of the reaction pathway according to the type of promoted Pd/C catalyst were compared.

• Clinical and Experimental Reproductive Medicine
• /
• 제2권1호
• /
• pp.19-38
• /
• 1975

A total of 185 vasovasostomies were carried out for 11 years. Various factors which are of importance in fluencing the successful vasovasostomies are analysed and presented as follows: In recent years, demand of reanastomosis of the vas deferens increased considerably. An average age of the subjects is 39, and that of their wives, 33 in this series. An average interval between vasectomy and vasovasostomy is 4 years. An average number of living chidren is 2.6 at the time of vasectomy. and 2.1 at the time of time of vasovasostomy. Merchant and public official are the most commonly encounterd occupation in the present series. Coital frequencies are 2.2/week after vasovasostomy. The most common reasons for requesting the vasovasostomy are remarriage and deaths of children, especially son. Success rate is considerably higher among younger group than that of the older. Success rate is somewhat higher among groups of shorter interval between the operations (vasectomy and vasovasostomy) than that of longer interval group. Success rate is higher among bilateral vasovasostomy group than that of any others. Success rate is higher in solid splint group and no splint group than hollow splint group. The closed dressing technique of the end of splint on the scrotum is found to be reasonably effective in preventing infection. Ordinary end-to-end anastomosis and folded side-to-side anastomosis techniques are proved to be the most ideal form of modified operation for the successful vasovasostomies. The most common causes of failure are infection, injuries of blood supply, avascular necrosis due to extensive mobilization, inadequate approximation of both vasal end, hematoma, changes of epididymal environment, and early ambulation in this series. Overall success rate of the author's series is found the 81 per cent, and impregnation rate is 35 per cent. Overall results reported by other workers are that success rate regarding appearance of sperm in the semen after operation is 64 per cent, and that of impregnation after vasovasostomy is 33 per cent. The results of semen assessment performed on same cases prior to vasectomy and following vasovasostomy showed that post-vasovasostomy sperm count scarcely reached three-quaters of pre-vasectomy count.

• Journal of Korean Neurosurgical Society
• /
• 제38권4호
• /
• pp.287-292
• /
• 2005

Objective : Kainic acid[KA] enhances the expression of nitric oxide synthase, increases nitric oxide[NO], and thus evokes epileptic convulsion, which results in neuronal damage in the rat brain. NO may stimulate cyclooxygenase type-2 [COX-2] activity, thus producing seizure and neuronal injury, but it has also been reported that KA-induced seizure and neurodegeneration are aggravated on decreasing the COX-2 level. This study was undertaken to investigate whether the suppression of NO using the NOS inhibitor, N-nitro-L-arginine methyl ester[L-NAME], suppresses or enhances the activity of COX-2. Methods : Silver impregnation and COX-2 immunohistochemical staining were used to localize related pathophysiological processes in the rat forebrain following KA-induced epileptic convulsion and L-NAME pretreatment. Post-injection survival of the rat was 1, 2, 3days and 2months, respectively. Results : After the systemic administration of KA in rats, neurodegeneration increased with time in the cornu ammonis [CA] 3, CA 1 and amygdala, as confirmed by silver impregnation. On pretreating L-NAME, KA-induced neuronal degeneration decreased. COX-2 enzyme activities increased after KA injection in the dentate gyrus, CA 3, CA 1, amygdala and pyriform cortex, as determined by COX-2 staining. L-NAME pretreatment prior to KA-injection, caused COX-2 activities to increase compared with KA- injection only group by 1day and 2days survival time point. Conclusion : These results suggest that L-NAME has a neuroprotective effect on KA-induced neuronal damage, especially during the early stage of neurodegeneration.

• 한국결정성장학회지
• /
• 제25권3호
• /
• pp.105-110
• /
• 2015

근관 치료를 위해 사용되는 섬유 강화형 포스트를 광중합 레진과 유리섬유를 이용하여 제조하였다. 제조된 포스트는 유리 섬유의 밀도가 높아짐에 따라 기계적 특성이 향상됨을 확인 할 수 있었고 광중합 레진의 점도 조절 및 진공함침 공정을 통해 미세 기공을 효과적으로 제거 할 수 있었다. 유리섬유와 광중합 레진과의 계면 결합력을 향상시키기 위해 유리 섬유 표면을 실란 커플링제를 사용하여 표면처리를 하였으며, 유리섬유의 표면처리는 유리 섬유 표면에 레진의 젖음성을 향상시켜 레진과의 결합 특성을 향상시키고 포스트의 기계적 특성을 향상시킴을 확인할 수 있었다.

• 한국군사과학기술학회지
• /
• 제8권4호
• /
• pp.146-151
• /
• 2005

The burning rates of combustible cartridge cases(CCCs) of 120mm kinetic energy ammunition were measured by CBT(Closed Bomb Tester). The burning coefficient was 1.4 for CCC fabricated by Post Impregnation(PI) process, and 1.0 for that by Beater Additive(BA) process. The BA process CCC showed the fixed burning coefficient of 1.0 in spite of changing the composition of CCC. As the Korean Future Main Battle Tank is requiring the high penetration performance compared with that of KlAl tank ammunition(K276), CCC was designed to have higher impetus composition than that of K276 composition(525J/g). The optimum impetus was 600J/g when considering the increases of pressure and muzzle velocity with increasing impetus. When impetus of CCC by changing the composition increased from 525J/g to 600J/g, the muzzle velocity of 12m/s at pressure increase of 3500psi increased in case of using SCDB propellant.

• 대한한의학원전학회지
• /
• 제30권4호
• /
• pp.1-17
• /
• 2017

Objective : Establishment and development of Woongihak on Korea requires detailed study into its contents including each period's Woongihak theory and clinical practices. Method : Woongihak is assumed to have been introduced during the Coreyo Dynasty. Then its development stage is divided into early, middle, later periods in Chosun dynasty, and the category further developed into the Japanese colonial period and then the post-liberation era. These periods were given respect to while medical textx and data related to Woongihak were collected and analyzed. Result & Conclusion : The general consensus is that Woongihak was introduced for the first time during the early period of Coryeo Dynasty, but there was no text around this era regarding Woongihak could have been found. Woongihak was found in Uibang-yuchwi, which entered Chosun Dynastyin early period and was published, where it annotated Sanghanjiggyeog, Saminbang, and eumjeungyaglye. Donguibogam, which was published during the middle period, introduced Woongi by hosting a sentence of Cheonjiungi, and Chochanggyeol was published during the late period and brought the level of Woongihak in Korea a step further. Lectures on Diagram of Woongihakw as published during the Japanese colonial era, but it lacks uniqueness since it was a translation of Suwenrushiyunqilunao. Another book published during this period was OunyukgiUihakbogam by Cho Wonhui. It brought a heavy influence on the generations to come because it drew up prescriptions through the Gaegun and Gaeggi or Date of Birth of Date of impregnation. It was easy to use and highly potent. The author of this paper also collected about 55 types of Woongi texts published after the liberation of Korea, but there are sure to be many that is missing from the collection.

• Journal of Advanced Marine Engineering and Technology
• /
• 제22권2호
• /
• pp.139-145
• /
• 1998

Filament winding method is widely used for composite fabrications using low viscosity liquid for-mation and processing asymmetrical structures of pressure vessel pipe rocket motor case etc. The filament winding method is affected by several parameters such as pot life of process time viscosi-ty of resin filament winding temperature and schedules curing condition and post curing condi-tion of resin. To develope high functional composite materials the rotation(5, 15, 20, 30rpm) of the winding machine was controlled by D.C motor. And the wiper to give proper tension was equipped between strand and resin bath. The resin is hooked by the design wiper. The adequate cure schedule was found by DSC. NOL ring test is carried out to investigate the basic physical properties such as design technology. The void contents in filament winding is generally higher than that of the prepreg laminated plate. These high contents of void can make a crack in resin in spite of low deformation. These problem was solved by giving tension in processing. To improve the characteristics of fiber volume fraction void contents resin/fiber bonding the winding speedc is changed under constant tension. It was found that resin impregnation was not different from in fiber contents void contents at the range of 0.5~1kg tension but it was found that resin was not impregnated at the above of 1.5kg tension. In burst test a pure PE liner was failed at a nozzle part under the $14kg/\textrm{cm}^2$ pressure but a pressure vessel of CNG was failed at a cylinder part under the $200kg/\textrm{cm}^2$ pressure.