• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.2
• /
• pp.140-145
• /
• 2013

The development of high performance fabrics have advanced body armor technology and improved ballistic performance while maintaining flexibility. Utilization of the shear thickening phenomenon exhibited by Shear Thickening Fluids (STF) has allowed further enhancement without hindering flexibility of the fabric through a process of impregnation. The effect of STF impregnation on the ballistic performance of fabrics has been studied for impact velocities below 700 m/s. Studies of STF-impregnated fabrics for high velocity impacts, which would provide a transition to significantly higher velocity ranges, are lacking. This study aims to investigate the effect of STF impregnation on the high velocity impact characteristics of Kevlar fabric by effectively dispersing silica nanoparticles in a suspension, impregnating Kevlar fabrics, and performing high velocity impact experiments with projectile velocities in the range of 1 km/s to compare the post impact characteristics between neat Kevlar and impregnated Kevlar fabrics. 100 nm diameter silica nanoparticles were dispersed using a homogenizer and sonicator in a solution of polyethylene glycol (PEG) and diluted with methanol for effective impregnation to Kevlar fabric, and the methanol was evaporated in a heat oven. High velocity impact of STF-impregnated Kevlar fabric revealed differences in the post impact rear formation compared to neat Kevlar.

• Journal of Korea Foundry Society
• /
• v.42 no.4
• /
• pp.218-225
• /
• 2022

For hydrogen-vehicle applications (air pressure control valve housing, APCVH), an investigation was conducted to determine how micro-defects in a high- pressure die-casted Al alloy (industrial code: ALDC12) could be controlled by means of a post-treatment using an organic-based impregnation solution in order to improve the air- tightness of the die-casted Al sample. Two different impregnation solutions were proposed and its test results were compared to a imported product from Japan with respect to the processing variables used. A structural investigation of the components under study was conducted by means of computer tomography and 3D X-ray micro-CT. These observations revealed that the use of the impregnation treatment to seal micro-defects led to highly significant and beneficial changes which were attributed mainly to interconnections among inherent micro-pores. A leak test after impregnation revealed that the performance improvement rate of the die-casted Al sample was ~70% for INNO-01. Therefore, the developed impregnation solutions offer an effective strategy to control the micro-defects found in various vehicle parts via die-casting.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.2
• /
• pp.103-110
• /
• 2020

This study examined the applicability of the vacuum impregnation post-processing to enhance the strength of binder jet 3D printed output. In addition, permeability, bulk density, and compressive strength of 10 mm, 20 mm, 30 mm, and 40 mm cubic specimens were examined to check the strength limit depending on the 3D prined output size. In result, as the maximum pressure increased, the post-processing storage solution permeated to the inside of the 3D printed sample and thus the permeation area ratio was improved. The compressive strength and the permeation area indicate the correlation between the exponential function of the adjusted R-square factor 0.992. In addition, the bulk density was increased, which can be inferred as the post-processing solution permeated to the inside. In conclusion, in order to enhance the compressive strength of the binder jet 3D printed output, it is essential to permeate the post-processing solution to the inside of the output, and vacuum impregnation can be proposed as an effective method.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.12
• /
• pp.2434-2440
• /
• 2008

The effect of sodium (Na) promotion was studied in the biphenol (BP) hydrogenation using various Pd/C catalysts. Different amounts of sodium metal were used for promotion with Pd/C and their effects on BP hydrogenation were observed. The promotion order was changed to compare the effect of the position of the promoter in relation to the palladium (Pd) metal on the catalytic activity and yield of the final product, bicyclohexyl-4,4'-diol (BHD). Pd/C catalysts prepared from different methods were also sodium-promoted and the changes of the reaction pathway according to the type of promoted Pd/C catalyst were compared.

• Clinical and Experimental Reproductive Medicine
• /
• v.2 no.1
• /
• pp.19-38
• /
• 1975

A total of 185 vasovasostomies were carried out for 11 years. Various factors which are of importance in fluencing the successful vasovasostomies are analysed and presented as follows: In recent years, demand of reanastomosis of the vas deferens increased considerably. An average age of the subjects is 39, and that of their wives, 33 in this series. An average interval between vasectomy and vasovasostomy is 4 years. An average number of living chidren is 2.6 at the time of vasectomy. and 2.1 at the time of time of vasovasostomy. Merchant and public official are the most commonly encounterd occupation in the present series. Coital frequencies are 2.2/week after vasovasostomy. The most common reasons for requesting the vasovasostomy are remarriage and deaths of children, especially son. Success rate is considerably higher among younger group than that of the older. Success rate is somewhat higher among groups of shorter interval between the operations (vasectomy and vasovasostomy) than that of longer interval group. Success rate is higher among bilateral vasovasostomy group than that of any others. Success rate is higher in solid splint group and no splint group than hollow splint group. The closed dressing technique of the end of splint on the scrotum is found to be reasonably effective in preventing infection. Ordinary end-to-end anastomosis and folded side-to-side anastomosis techniques are proved to be the most ideal form of modified operation for the successful vasovasostomies. The most common causes of failure are infection, injuries of blood supply, avascular necrosis due to extensive mobilization, inadequate approximation of both vasal end, hematoma, changes of epididymal environment, and early ambulation in this series. Overall success rate of the author's series is found the 81 per cent, and impregnation rate is 35 per cent. Overall results reported by other workers are that success rate regarding appearance of sperm in the semen after operation is 64 per cent, and that of impregnation after vasovasostomy is 33 per cent. The results of semen assessment performed on same cases prior to vasectomy and following vasovasostomy showed that post-vasovasostomy sperm count scarcely reached three-quaters of pre-vasectomy count.

• Journal of Korean Neurosurgical Society
• /
• v.38 no.4
• /
• pp.287-292
• /
• 2005

Objective : Kainic acid[KA] enhances the expression of nitric oxide synthase, increases nitric oxide[NO], and thus evokes epileptic convulsion, which results in neuronal damage in the rat brain. NO may stimulate cyclooxygenase type-2 [COX-2] activity, thus producing seizure and neuronal injury, but it has also been reported that KA-induced seizure and neurodegeneration are aggravated on decreasing the COX-2 level. This study was undertaken to investigate whether the suppression of NO using the NOS inhibitor, N-nitro-L-arginine methyl ester[L-NAME], suppresses or enhances the activity of COX-2. Methods : Silver impregnation and COX-2 immunohistochemical staining were used to localize related pathophysiological processes in the rat forebrain following KA-induced epileptic convulsion and L-NAME pretreatment. Post-injection survival of the rat was 1, 2, 3days and 2months, respectively. Results : After the systemic administration of KA in rats, neurodegeneration increased with time in the cornu ammonis [CA] 3, CA 1 and amygdala, as confirmed by silver impregnation. On pretreating L-NAME, KA-induced neuronal degeneration decreased. COX-2 enzyme activities increased after KA injection in the dentate gyrus, CA 3, CA 1, amygdala and pyriform cortex, as determined by COX-2 staining. L-NAME pretreatment prior to KA-injection, caused COX-2 activities to increase compared with KA- injection only group by 1day and 2days survival time point. Conclusion : These results suggest that L-NAME has a neuroprotective effect on KA-induced neuronal damage, especially during the early stage of neurodegeneration.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.25 no.3
• /
• pp.105-110
• /
• 2015

The fiber-reinforced endodontic posts were prepared using a photocurable resin and a glass fiber. The mechanical property of the posts increased with increasing density of glass fiber and the micro-pores in the post were removed by a vacuum impregnation process. To improve the interfacial adhesion between glass fiber and polymer, silane coupling agent was used. The surface treatment of glass fiber increased the surface wettability of resing on glass fiber and increased the adhesion property with resin, consequently improved the mechanical property of posts.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.8 no.4 s.23
• /
• pp.146-151
• /
• 2005

The burning rates of combustible cartridge cases(CCCs) of 120mm kinetic energy ammunition were measured by CBT(Closed Bomb Tester). The burning coefficient was 1.4 for CCC fabricated by Post Impregnation(PI) process, and 1.0 for that by Beater Additive(BA) process. The BA process CCC showed the fixed burning coefficient of 1.0 in spite of changing the composition of CCC. As the Korean Future Main Battle Tank is requiring the high penetration performance compared with that of KlAl tank ammunition(K276), CCC was designed to have higher impetus composition than that of K276 composition(525J/g). The optimum impetus was 600J/g when considering the increases of pressure and muzzle velocity with increasing impetus. When impetus of CCC by changing the composition increased from 525J/g to 600J/g, the muzzle velocity of 12m/s at pressure increase of 3500psi increased in case of using SCDB propellant.

• Journal of Korean Medical classics
• /
• v.30 no.4
• /
• pp.1-17
• /
• 2017

Objective : Establishment and development of Woongihak on Korea requires detailed study into its contents including each period's Woongihak theory and clinical practices. Method : Woongihak is assumed to have been introduced during the Coreyo Dynasty. Then its development stage is divided into early, middle, later periods in Chosun dynasty, and the category further developed into the Japanese colonial period and then the post-liberation era. These periods were given respect to while medical textx and data related to Woongihak were collected and analyzed. Result & Conclusion : The general consensus is that Woongihak was introduced for the first time during the early period of Coryeo Dynasty, but there was no text around this era regarding Woongihak could have been found. Woongihak was found in Uibang-yuchwi, which entered Chosun Dynastyin early period and was published, where it annotated Sanghanjiggyeog, Saminbang, and eumjeungyaglye. Donguibogam, which was published during the middle period, introduced Woongi by hosting a sentence of Cheonjiungi, and Chochanggyeol was published during the late period and brought the level of Woongihak in Korea a step further. Lectures on Diagram of Woongihakw as published during the Japanese colonial era, but it lacks uniqueness since it was a translation of Suwenrushiyunqilunao. Another book published during this period was OunyukgiUihakbogam by Cho Wonhui. It brought a heavy influence on the generations to come because it drew up prescriptions through the Gaegun and Gaeggi or Date of Birth of Date of impregnation. It was easy to use and highly potent. The author of this paper also collected about 55 types of Woongi texts published after the liberation of Korea, but there are sure to be many that is missing from the collection.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.2
• /
• pp.139-145
• /
• 1998

Filament winding method is widely used for composite fabrications using low viscosity liquid for-mation and processing asymmetrical structures of pressure vessel pipe rocket motor case etc. The filament winding method is affected by several parameters such as pot life of process time viscosi-ty of resin filament winding temperature and schedules curing condition and post curing condi-tion of resin. To develope high functional composite materials the rotation(5, 15, 20, 30rpm) of the winding machine was controlled by D.C motor. And the wiper to give proper tension was equipped between strand and resin bath. The resin is hooked by the design wiper. The adequate cure schedule was found by DSC. NOL ring test is carried out to investigate the basic physical properties such as design technology. The void contents in filament winding is generally higher than that of the prepreg laminated plate. These high contents of void can make a crack in resin in spite of low deformation. These problem was solved by giving tension in processing. To improve the characteristics of fiber volume fraction void contents resin/fiber bonding the winding speedc is changed under constant tension. It was found that resin impregnation was not different from in fiber contents void contents at the range of 0.5~1kg tension but it was found that resin was not impregnated at the above of 1.5kg tension. In burst test a pure PE liner was failed at a nozzle part under the $14kg/\textrm{cm}^2$ pressure but a pressure vessel of CNG was failed at a cylinder part under the $200kg/\textrm{cm}^2$ pressure.