• Asian-Australasian Journal of Animal Sciences
• /
• v.28 no.4
• /
• pp.519-529
• /
• 2015

The aims of this study were to determine the effects of feeding medium-roasted soybean meal (SBM) and corn dried distiller's grains with solubles (CDDGS) in dairy cows on milk production and income over feed costs. A randomized complete block design experiment was conducted with 24 crossbred multiparous Holstein Friesian dairy cows in early- and mid-lactation. Four dietary treatments were as follows: basal diet without feed substitute (Control), 7.17% dry matter (DM) roasted SBM replaced for concentrate (R-SBM), 11.50% DM CDDGS replaced for concentrate (DDGS), and 3.58% DM roasted SBM plus 5.75% DM CDDGS replaced for concentrate (SB-DG). The roasted SBM was produced using a medium-heated treatment at $100^{\circ}C$ for 180 min. Dry matter intake was not affected by feeding high rumen undegradable protein (RUP) sources, but the replacement of roasted SBM and CDDGS for concentrate significantly improved (p<0.001) RUP intake (0.90, 0.86, and 0.88 kg/d corresponding to R-SBM, DDGS, and SB-DG) compared to the control (0.61 kg/d). Feeding roasted SBM and CDDGS alone or in combination had no significant effect on milk composition of dairy cows (p>0.05), whereas milk yield was significantly increased by 3.08 kg/d in the SB-DG group relative to the control group (p<0.01). Net income was meaningfully increased (p<0.05) from 4th week post feeding, the SB-DG group reached the greatest net income ($3.48/head/d) while the control group had the lowest value ($2.60/head/d). In conclusion, the use of CDDGS alone or in combination with medium-roasted SBM as substitute for concentrate in lactating dairy cattle diet led to improved milk production and net income over feed costs without affecting total dry matter intake and milk composition, while feeding medium-roasted SBM seemed to show intermediate values in almost parameters.

• The Journal of Information Systems
• /
• v.23 no.4
• /
• pp.49-74
• /
• 2014

The introduction of smartphone caused the most revolutionary change in the domestic telecommunications market after the digital revolution. However, due to the saturation of the local market, it is expected to post negative growth in 2016 and the sales of national communication carriers is in stasis. Thus, the smartphone industry is starting to shift its marketing efforts to secure the silver generation who still has room for increase in the rate of smartphone usage. As the silver generation has physical limitations and differences in needs, the marketing strategy based on the smartphone utilization is not appropriate. This study suggests the new silver generation, who has high income level and similar characteristics to the younger generation, as the new customer segment for smartphone. We analyze the effects of the major variables of UTAUT on smartphone use, as well as examine how these relationships differ between the new silver and the net generation. We verified the hypotheses using a survey with 309 smartphone users. The research findings supported the hypotheses regarding the effects of performance expectancy, effort expectancy and facilitating conditions on smartphone use, but did not support the hypothesis on the effect of social influence. The result of the group comparisons showed that both generation have similar characteristics on innovativeness and cognitive absorption, but the moderating effect of age on performance expectancy, effort expectancy and use is stronger in conjunction with the new silver generation. The study results are expected to be used in establishing a marketing strategy for the new silver generation.

• The Journal of Industrial Distribution & Business
• /
• v.9 no.10
• /
• pp.73-82
• /
• 2018

Purpose - Unstable vegetable prices have been one of the major concerns in Korean agricultural and food marketing system. The Korean government has implemented a number of policy instruments, including government purchasing programs in order to alleviate fluctuations in vegetable prices. The economic impact of policy instruments has been assessed based on the average monthly price change rate before and after the implementation of the policy. However, this approach failed to provide a net impact of policy measures on price stabilization in the vegetable markets, as policy impacts could not be successfully distinguished from other effects on price changes in the vegetable market. The purpose of this study is to evaluate the net impact of the government purchasing program on the price volatility of dried red pepper which is considered one of the major vegetables in Korea. Research design, data, and methodology - This study develops a monthly dynamic partial equilibrium model of Korean dried red pepper market. Behavioral equations in the model were estimated by OLS and synthetic method based on the annual and monthly time series data from 1993 to 2015. The model is first simulated to yield actual dried red pepper market conditions in 2015 as a baseline and then compared it to the scenario assuming that there were no government purchases of dried red pepper in 2015. Results - According to the ex-post scenario analysis using the developed model, without the government procurements in 2015, the average monthly price change rate and the value of coefficient of variation of dried red pepper in 2015 would be respectably 7.9 percent and 0.10. It is relatively higher than the actual average monthly price change rate and the value of coefficient of variation of dried red pepper in 2015 which were respectively 1.7 percent and 0.06. Conclusions - The ex-post simulation results in this study shows that if there were no government purchases of dried red pepper in 2015, the dried red pepper market would have had much higher volatile price movements. The results of this study would provide useful information for future price stabilization policy of vegetable markets in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.8 no.1
• /
• pp.75-82
• /
• 1995

Two digestion trials were conducted to investigate the effect of feeding heated soybean meal (HSBM) on ruminal and post-ruminal digestion of organic matter (OM) and nitrogen (N), bacterial N flow to the duodenum and N balance in young calves weaned at 6 weeks of age. In trial 1, calves were fed concentrate diets containing soybean meal (SBM) or HSBM and hay mixed in the ratio of 6:4 to support daily weight gain of 0.5 kg. The same concentrate diets were used in trial 2, but the ratio of concentrate to hay was 7:3 to support body weight gain of 0.7 kg/d. Measurements were made 10 and 13 weeks of age in trial 1, and at 10 and 15 weeks in trial 2. Ruminal OM digestibility increased with advancing age in both trials. Ruminal OM digestion was not affected by the diets in trial 1, but it was greater for the SBM diet than for the HSBM diet at 10 weeks in trial 2. Net N loss from the rumen was lover for the HSBM diet than for the SBM diet in trial 1, but it was not affected by the diets in trial 2. Bacterial N flow to the duodenum, N digestion in the total digestive tract and N retention were not affected by the diets in either of the trials.

• Nuclear Engineering and Technology
• /
• v.46 no.3
• /
• pp.413-422
• /
• 2014

Presented in this study are the variations of microstructures and mechanical properties with tempering and Post-Weld Heat Treatment (PWHT) conditions for SA508 Gr.4N steel used as Reactor Pressure Vessel (RPV) material. The blocks of model alloy were austenitized at the conventional temperature of $880^{\circ}C$ then tempered and post-weld heat treated at four different conditions. The hardness and yield strength decrease with increased tempering and PWHT temperatures, but impact toughness is significantly improved, especially in the specimens tempered at $630^{\circ}C$. The sample tempered at $630^{\circ}C$ with PWHT at $610^{\circ}C$ shows optimum mechanical properties in hardness, strength, and toughness, excluding only the transition property in the low temperature region. The microstructural observation and quantitative analysis of carbide size distribution show that the variations of mechanical properties are caused by the under-tempering and carbide coarsening which occurred during the heat treatment process. The introduction of PWHT results in the deterioration of the ductile-brittle transition property by an increase of coarse carbides controlling cleavage initiation, especially in the tempered state at $630^{\circ}C$.

• THE INTERNATIONAL COMMERCE & LAW REVIEW
• /
• v.53
• /
• pp.207-229
• /
• 2012

In IP 7 and LCCP 201, Law Commission considers the insured's duty of good faith after the formation of the contract. This article intends to review and analyse the legal implications of proposals in IP 7 and LCCP 201. The results of analysis are following. First, Law Commission propose to end the remedy of avoidance under MIA 1906 section 17, because avoidance of past claims is unprincipled, impractical and unnecessarily harsh. Secondly, LC proposes that an insured who makes a fraudulent claim should forfeit the whole claim which the fraud relates, but that the fraud should not invalidate previous and legitimate claims. Thirdly, LC proposes to introduce a statutory right for the insurer to claim damages for the reasonable, foreseeable costs of investigate a fraudulent claim in specific circumstances and that damages would be limited to those cases where the insurer can show an actual, net loss. Finally, LC provisionally propose that an express fraud clause should be upheld in business insurance, whereas in consumer insurance, any term which purports to give the insurer greater rights in relation to fraudulent claims that those set out in statute would be of no effect.

• Nuclear Engineering and Technology
• /
• v.46 no.5
• /
• pp.619-632
• /
• 2014

The Best Estimate Plus Uncertainty (BEPU) method has been widely used to evaluate the uncertainty of a best-estimate thermal hydraulic system code against a figure of merit. This uncertainty is typically evaluated based on the physical model's uncertainties determined by expert judgment. This paper introduces the application of data assimilation methodology to determine the uncertainty bands of the physical models, e.g., the mean value and standard deviation of the parameters, based upon the statistical approach rather than expert judgment. Data assimilation suggests a mathematical methodology for the best estimate bias and the uncertainties of the physical models which optimize the system response following the calibration of model parameters and responses. The mathematical approaches include deterministic and probabilistic methods of data assimilation to solve both linear and nonlinear problems with the a posteriori distribution of parameters derived based on Bayes' theorem. The inverse problem was solved analytically to obtain the mean value and standard deviation of the parameters assuming Gaussian distributions for the parameters and responses, and a sampling method was utilized to illustrate the non-Gaussian a posteriori distributions of parameters. SPACE is used to demonstrate the data assimilation method by determining the bias and the uncertainty bands of the physical models employing Bennett's heated tube test data and Becker's post critical heat flux experimental data. Based on the results of the data assimilation process, the major sources of the modeling uncertainties were identified for further model development.

• Journal of the Korean Ceramic Society
• /
• v.43 no.8 s.291
• /
• pp.472-478
• /
• 2006

The effect of compositional and processing variables on a nitriding reaction of silicon powder compact and subsequent post sintering of RBSN (Reaction-Bonded Silicon Nitride) was investigated. The addition of a nitriding agent enhanced nitridation rate substantially at low temperatures, while the formation of a liquid phase between the nitriding agent and the sintering additives at a high temperature caused a negative catalyst effect resulting in a decreased nitridation rate. A liquid phase formed by solely an additive, however, was found to have no effect on nitridation for the additive amount used in this research. The original site of a decomposing pore former was loosely filled by a reaction product ($Si_3N_4$), which provided a specimen with nitriding gas passage. For SRBSN (Sintered RBSN) specimens of high porosity, only a marginal dimensional change was measured after post sintering. Its engineering implication for near-net shaping ability is discussed.

• The KIPS Transactions:PartD
• /
• v.15D no.6
• /
• pp.873-878
• /
• 2008

The wild animal warning post and the echo-bridge on the road are widely used as a popular roadkill prevention system. The warning post shows a one way warning message to drivers and is not effective to prevent animals from being killed. In the case of echo-bridge, the construction cost is very high such that we could not build sufficient number of the echo bridges on the road. Therefore, we have proposed a new roadkill prevention system which is designed and implemented to warn both of drivers and animals. This system is composed with sensor, speaker, web server, and navigation system and the software is designed to use web services on the web under the. Net environment.

• Nuclear Engineering and Technology
• /
• v.52 no.5
• /
• pp.1079-1092
• /
• 2020

A parametric study of several parameters relevant to design safety on the spent nuclear fuel (SNF) rod response under a drop accident is presented. In the view of the complexity of interactions between the independent safety-related parameters, a factorial design of experiment is employed as an efficient method to investigate the main effects and the interactions between them. A detailed single full-length fuel rod is used with consideration of post-irradiated fuel conditions under horizontal and vertical free-drops onto an unyielding surface using finite-element analysis. Critical drop heights and critical g-loads that yield the threshold plastic strain in the cladding are numerically estimated to evaluate the fuel rod structural resistance to impact load. The combinatory effects of four uncertain parameters (pellet-cladding interfacial bonding, material properties, spacer grid stiffness, rod internal pressure) and the interactions between them on the fuel rod response are investigated. The principal finding of this research showed that the effects of above-mentioned parameters on the load-carrying capacity of fuel rod are significantly different. This study could help to prioritize the importance of data in managing and studying the structural integrity of the SNF.