• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.415-425
• /
• 2005

Statement of problem : Fracture of composite resin core will be occulted by progress of crack. Bonding interface of different materials has large possibility of starting point of crack line. Therefore, the bond strength of glass fiber post to composite resin core is important for prevention of fracture. Purpose: This in vitro study tried to find out how to get the higher strength of glass fiber post to composite resin core through surveying the maximum load that fractures the post and cote complex. Materials and methods: 40 specimens made with glass fiber Posts(Style $post^{(R)}$, Metalor, Swiss) and composite resin core ($Z-100^{(R)}$, 3M, USA) were prepared and loaded to failure with push-out type shear-bond strength test in a universal test machine. The maximum fracture load and fracture mode were investigated in the specimens that were restored with four different surface treatments. With the data. ANOVA test was used to validate the significance between the test groups, and Bonferroni method was used to check if there is any significant statistical difference between each test group. Evely analysis was approved with 95% reliance. Results: On measuring the maximum fracture load of specimens, both the treatments of sandblasted and acid-etched one statistically showed the strength increase rather than the control group (p<0.005). The scanning electric microscope revealed that sand blasting made more micro-retention form not only on the resin matrix but on the glass fiber, and acid-etching contributed to increase in surface retention form, eliminated the inorganic particles in resin matrix. Specimen fracture modes investigation represented that sand blasted groups showed lower bonding failure than no-sand blasted groups. Conclusion: Referring to the values of maximum fracture load of specimens, the bonding strength was increased by sand blasting and acid-etching.

• Tribology and Lubricants
• /
• 제26권5호
• /
• pp.277-282
• /
• 2010

The purpose of this paper is to study and analysis the failure examples for parasitic current leakage produced in starting system on gasoline engine. It verified the discharge of battery by electric leakage because of internal wiring damage problem for CD auto changer installed in car. Also, it verified the no-stating phenomenon because of deposit forming by chemical reaction of battery fluid between battery post and cable fixing parts. It verified the damage for brush holder and commutator mixing by internal short phenomenon because of brush carbon a particle and engine oil that was flowed into internal of starting motor. It verified the working phenomenon of audio by a point of contact even if the driver turn to "LOCK" position the key.

• Structural Engineering and Mechanics
• /
• 제29권6호
• /
• pp.623-642
• /
• 2008

While spatial plastic mechanism analysis has been widely and successfully applied to thinwalled steel structures to analyse the post-failure behaviour of sections and connections, there remains some contention in the literature as to the basic capacity of an inclined yield line. The simple inclined hinge commonly forms as part of the more complex spatial mechanism, which may involve a number of hinges perpendicular or inclined to the direction of thrust. In this paper some of the existing theories are compared with single inclined yield lines that form in flange outstands, by comparing the theories with plate tests of plates simply supported on three sides with the remaining (longitudinal) edge free. The existing mechanism theories do not account for different in-plane displacement gradients of the loaded edge, nor the slenderness of the plates, and produce conservative results. A modified theory is presented whereby uniform and non-uniform in-plane displacements of the loaded edge of the flange, and the slenderness of the flange, are accounted for. The modified theory is shown to compare well with the plate test data, and its application to flanges that are components of sections in compression and/or bending is presented.

• 소성∙가공
• /
• 제31권6호
• /
• pp.384-393
• /
• 2022

The flow forming process consists of a split process, a divide process, and a forming process. The split process is a forming process in which rollers radially permeate a simple disc-shaped forging material and split it in both directions to form a top-bottom bidirectional cup. It is advantageous for post-processing to deepen the forming depth in the split process but this characteristic causes the failure near the edge of the mandrel during the actual process. The split process was analyzed using Rigid Plastic FEM, and the stress analysis of the mandrel was conducted to find the cause of the failure. It was found that the failure occurred due to fatigue accumulation damage caused by repeated residual stress.

• 한국지반공학회논문집
• /
• 제18권5호
• /
• pp.83-97
• /
• 2002

본 연구에서는 암석의 최대강도 이전의 각 손상단계에서 탄성정수의 변화로 나타나는 손상특성과 최대강도 후거동을 고려할 수 있는 손상모델을 실험적으로 개발하였다. 일축 및 삼축압축실험 결과를 토대로 암석의 손상기준을 결정하였고, 각 손상단계에서 탄성정수의 변화를 구속압의 함수로 최적화시켰다. 또한 최대강도 후 Hoek-Brown상수 mr과 sr을 이용하여 최대강도 후 거동을 모사하였다. 개발된 실험 손상모델을FLAC$^{2D}$의 FISH 함수로 구현하여 수치해석을 실시하였다. Hoek-Brown 최대강도 후 상수들이 해석결과에 미치는 영향을 분석한 결과, 일축압축강도는 mr과 sr 모두에 의해 영향을 받으나 5,에 의해 더 크게 좌우되는 것으로 나타났다. 반면 m,은 최대강도 후의 응력-변형률 곡선의 기울기에 큰 영향을 끼치는 것으로 나타났다. 분석으로부터 얻어진 최적 손상모델을 수치해석에 적용한 결과 실험실 시험으로부터 얻어진 최대 강도와 암석의 손상에 따른 강성 변화를 잘 예측하였다.다.

• 한국지반공학회지:지반
• /
• 제13권6호
• /
• pp.139-146
• /
• 1997

기초파괴는 일반적으로 변형이 집중되어 하나 또는 그 이상의 파괴면이 발생되어, 기초의 관입과 더불어 파괴면은 점진적으로 형성된다. 본 논문의 목적은 수치적으로 기초의 극한지지력 및 진행성 파괴거동을 파악할 수 있는가 하는 가능성을 검토하는데 있다. 대변형이론과 변형률 연화이론을 사용하여 비배수 상태인 점토지반의 기초에 대한 진행성 파괴거동에 대하여 분석하였다. 본 논문에서는 기초의 진행성 파괴과정과 완전한 하중 변위곡선을 해석하기 위한 수치해석 방법에 대하여 논하였다. 해석결과, 띠기초의 피크 이후의 지반파괴거동 및 진행성 파괴과정에 대한 명확한 수치적 해석가능성을 보여주었다.

• Radiation Oncology Journal
• /
• 제2권1호
• /
• pp.93-100
• /
• 1984

Among 238 patients with Non-Hodgkin's lymphoma received radiotherapy at Yonsei Cancer center, Yonsei University Medical College, from 1970 to 1981, 30 patients presented with localized(Stage I&II ) gastrointestinal lymphomas. Retrospective analysis of these 30 cases in an attempt to evaluate the influence of various prognostic factors and the effectiveness of therapy is presented. Overall 5 year survival rate of 30 cases of primary gastrointestinal lymphoma was $48\%$. Bulk of residual disease after initial surgery and stage were significant prognostic factors. Stage I with small residual disease treated with post-op irradiation achieved $100\%$ 5 year survival rate. So above group is considered curable with surgery and post-op irradiation. $80\%$ of Stage II with large residual disease were died with intra-abdominal local tumor control failure. Stage II with small residual disease showed $31.5\%$ 5 year survival rate. Non of them died with local failure. So, we suggest that complete surgical resection of tumor mass should be attempted initially in the management of localized gastrointestinal lypmhomas and systemic chemotherapy is needed in addition to post-op irradiation in the cases of Stage II and large residual disease after initial surgery.

• Structural Engineering and Mechanics
• /
• 제60권5호
• /
• pp.781-794
• /
• 2016

Due to its relatively good safety performance and aesthetic benefits, laminated glass (LG) is increasingly being used as load-carrying members in modern buildings. This paper presents an experimental study into one applicational scenario of structural LG subjected to in-plane bending. The aim of the study is to reveal the in-plane behaviors of the LG beams made up of multi-layered glass sheets. The LG specimens respectively consisted of two, three and four plies of glass, bonded together by two prominent adhesives. A total of 26 tests were carried out. From these tests, the structural behaviors in terms of flexural stiffness, load resistance and post-breakage strength were studied in detail, whilst considering the influence of interlayer type, cross-sectional interlayer percentage and presence of shear forces. Based on the test results, analytical suggestions were made, failure modes were identified, corresponding failure mechanisms were discussed, and a rational engineering model was proposed to predict the post-breakage strength of the LG beams. The results obtained are expected to provide useful information for academic and engineering professionals in the analysis and design of LG beams bending in-plane.

• Nuclear Engineering and Technology
• /
• 제54권9호
• /
• pp.3205-3214
• /
• 2022

The aim of this study is to provide a clear and accessible method to obtain accurate true-stress strain data, and to extend the limited material data beyond the ultimate tensile strength (UTS) for AISI 304L. AISI 304L is used for the outer construction for some types of nuclear transport packages, due to its post-yield ductility and high failure strain. Material data for AISI 304L beyond UTS is limited throughout literature. 3D digital image correlation (DIC) was used during a series of uniaxial tensile experiments. Direct method extracted data such as true strain and instantaneous cross-sectional area throughout testing such that the true stress-strain response of the material up to failure could be created. Post processing of the DIC data has a considerable effect on the accuracy of the true stress-strain data produced. Influence of subset size and smoothing of data was investigated by using finite element analysis to inverse model the force displacement response in order to determine the true stress strain curve. The FE force displacement response was iteratively adapted, using subset size and smoothing of the DIC data. Results were validated by matching the force displacement response for the FE model and the experimental force displacement curve.

• Nuclear Engineering and Technology
• /
• 제35권5호
• /
• pp.378-386
• /
• 2003

Recently failures of nuclear fuel rods in Korean nuclear power plants were reported and their failure causes have been investigated by using PIE techniques. Destructive and physico-chemical examinations reveal that the clad hydriding phenomena had caused the rod failures primarily and secondarily in each case. In this study, the basic mechanisms of the primary and the secondary hydriding failures are reviewed, PIE data such as cladding inner and outer surface oxide thickness and the restructuring of the fuel pellets are analyzed, and they are compared with the predicted behaviors by a fuel performance code. In addition, post-defected fuel behaviors are reviewed and qualitatively analyzed. The results strongly support that the hydriding processes, primary and secondary, played critical roles in the respective fuel rods failures and the secondary hydriding failure can take place even in the fuel rod with low linear heat generation rate.