• Journal of Veterinary Clinics
• /
• v.27 no.2
• /
• pp.170-174
• /
• 2010

With the ease availability of statistical software and powerful computers the application of statistical methods in domestic veterinary journals is on the increase. In parallel with this benefit, statistical errors are not uncommon even in renowned scientific and medical journals. These errors may lead to misinterpretation of the data, thereby, subjected to faulty conclusions. A systematic review of articles published in 8 issues of the Journal of Veterinary Clinics during 2006-2007 was performed to assess the statistical methodology and reporting. Ninety-four (72.9%) articles of the 129 original articles screened included any inferential statistical analysis in the article, including comparison of 3 or more groups (53 or 56.4%), comparison of independent 2 groups (40 or 42.6%), and paired t-test (9 or 9.6%) in order. Of the 94 articles in which statistical analysis was done 62 (or 66.0%) had at least 1 statistical error. Errors included failure to apply or incorrectly applying independent Student's t-test for paired data or vice versa, inappropriate use of t-test for more than 3 groups and failure in chi-square test to consider continuity-correction for small expected frequencies. The common errors in ANOVA were failure to validate assumption of the test, inappropriate post-hoc multiple-comparison and incorrect assumption of independence of data in repeated measures design. Reporting errors included failure to state statistical methods and failure to state specific test if more than 1 test was done. It is suggested that an editorial effort would be necessary to achieve the improvement of appropriate statistical procedures through the publication of statistical guidelines to author(s).

• Bulletin of the Society of Naval Architects of Korea
• /
• v.27 no.2
• /
• pp.55-62
• /
• 1990

In this paper, another method for system reliability analysis, called the extended incremental load method, is introduced. The method is an extension of the conventional incremental load method and has been developed aiming at evaluating the probability of system failure(or system reliability) of continuous structures such as floating offshore structures under the multiple loading condition, more realistically considering the post-ultimate behaviour of failed components and directly using the strength formulae of principle components in a structure with employing the modified safety margin equation proposed herein in the system analysis. The method has been applied to the Hutton TLP operated in the Hutton field in the North Sea and a certain variant of the design using the TLP Rule Case Committee type improved strength models. System failure probability and corresponding system reliability indices are derived for a more economical and efficient design. The redundancy characteristics are also addressed. The TLP forms are shown to possess high reserve strength and system safety.

• Composites Research
• /
• v.30 no.5
• /
• pp.297-302
• /
• 2017

Finite element analysis of T-beam laminate structure under bending-torsional loading was conducted to prevent the delamination which is the major failure behavior on laminated composites. Three-dimensional preform, which is that fabric is braided through thickness direction, is suggested from the laminate analysis. The analysis aimed to optimize the fiber ratio in laminated composites. After it is suggested that guideline for design of T-beam structure using commercial software ANSYS Composites PrePost. The results show that strength of T-beam structure is increased 21.6% when the fiber density along with beam length direction is two times bigger than transverse direction. It is expected that development of high strength T-beam structure using designed three-dimensional preform.

• Journal of Korea Technology Innovation Society
• /
• v.9 no.4
• /
• pp.812-841
• /
• 2006

Previous studies have shown that the ex-ante financial ratios, mainly used by financial institutions for loan evaluation purpose, are related to the ex-post finn's performance of venture firm's. The main objective of this study is to examine whether non-financial variables such as 'technology', 'marketability', and 'other business indexes' have extra explanatory power in forecasting the ex-post firm's performance of small and medium size venture firm's in Korea. The implications and results of this study are expected to be useful in loan evaluation, investment decision and internal management decisions of venture firms. Among small and medium sized manufacturing firms funded in the year of 1999 through 2005, 416 firms are selected for our analysis. The relationship between evaluation indexes and firm's success/failure is investigated using binary logistic regression analysis and factor analysis with an aid of SPSS program. The summarized results are as follows. First, current evaluation model, used for loan evaluation purpose for small and medium size manufacturing firms show the same discriminatory power as previous prediction model. Second, among the tested additional variables, significant indices are 'technological capability of CEO', 'managerial capability of CEO', and 'business feasibility'. Third, while previous studies on evaluation structure had 3 factors, this study showed that valuation's structure has 6 factors.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.301-308
• /
• 2017

Objectives: It was aimed to compare the cyclic fatigue resistances of ProTaper Universal (PTU), ProTaper Next (PTN), and ProTaper Gold (PTG) and the effects of sterilization by autoclave on the cyclic fatigue life of nickel-titanium (NiTi) instruments. Materials and Methods: Eighty PTU, 80 PTN, and 80 PTG were included to the present study. Files were tested in a simulated canal. Each brand of the NiTi files were divided into 4 subgroups: group 1, as received condition; group 2, pre-sterilized instruments exposed to 10 times sterilization by autoclave; group 3, instruments tested were sterilized after being exposed to 25%, 50%, and 75% of the mean cycles to failure, then cycled fatigue test was performed; group 4, instruments exposed to the same experiment with group 3 without sterilization. The number of cycles to failure (NCF) was calculated. The data was statistically analyzed by using one-way analysis of variance and post hoc Tukey tests. Results: PTG showed significantly higher NCF than PTU and PTN in group 1 (p < 0.05). Sterilization significantly increased the NCF of PTN and PTG (p < 0.05) in group 2. PTN in group 3 had significantly higher cyclic fatigue resistance than PTN group 4 (p < 0.05). Also, significantly higher NCF was observed for PTG in group 2 than in groups 3 and 4 (p < 0.05). Conclusions: PTG instrument made of new gold alloy was more resistant to fatigue failure than PTN and PTU. Autoclaving increased the cyclic fatigue resistances of PTN and PTG.

• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.231-238
• /
• 2006

Whole-body exposure to high-dose radiation causes injury involving multiple organs that depends on their sensitivity to radiation. This acute radiation syndrome (ARS) is caused by a brief exposure of a major part of the body to radiation at a relatively high dose rate. ARS is characterized by an initial prodromal stage, a latent symptom-free period, a critical or manifestation phase that usually takes one of four forms (three forms): hematologic, gastrointestinal, or cardiovascular and neurological (neurovascular), depending upon the exposure dose, and a recovery phase or death. One of the most important factors in treating victims exposed to radiation is the estimation of the exposure dose. When high-dose exposure is considered, initial dose estimation must be performed in order to make strategy decisions for treatment as soon as possible. Dose estimation can be based on onset and severity of prodromal symptoms, decline in absolute lymphocyte count post exposure, and chromosomal analysis of peripheral blood lymphocytes. Moreover, dose assessment on the basis of calculation from reconstruction of the radiation event may be required. Experience of a criticality accident occurring in 1999 at Tokai-mura, Japan, showed that ARS led to multiple organ failure (MOF). This article will review ARS and discuss the possible mechanisms of MOF developing from ARS.

• Steel and Composite Structures
• /
• v.36 no.3
• /
• pp.321-337
• /
• 2020

Contemporary design and construction of steel-concrete composite structures employs the use of prefabricated concrete elements and demountable shear connectors in order to reduce the construction time and costs and enable dismantling of elements for their potential reuse at the end of life of buildings. Bolted shear connector with mechanical coupler is presented in this paper. The connector is assembled from mechanical coupler and rebar anchor, embedded in concrete, and steel bolt, used for connecting steel to concrete members. The behaviour and ultimate resistance of bolted connector with mechanical coupler in wide and narrow members were analysed based on push-out tests and FE analyses conducted in Abaqus software, with focus on concrete edge breakout and bolt shear failure modes. The effect of concrete strength, concrete edge distance and diameter and strength of bolts on failure modes and shear resistance was analysed. It was demonstrated that premature failure by breakout of concrete edge occurs when connectors are located 100 mm or closer from the edge in low-strength and normal-strength reinforced concrete. Furthermore, the paper presents a relatively simple model for hand calculation of concrete edge breakout resistance when bolted connectors with mechanical coupler are used. The model is based on the modification of prediction model used for cast-in and post-installed anchors loaded parallel to the edge, by implementing equivalent influence length of connector with variable diameter. Good agreement with test and FE results was obtained, thus confirming the validity of the proposed method.

• Journal of The Korean Association For Science Education
• /
• v.29 no.4
• /
• pp.414-422
• /
• 2009

In this study, we investigated the influences of students' motivational characteristics on the processes of learning density concept using a discrepant event. The participants were 642 seventh graders from two middle schools. Tests of failure tolerance, self-efficacy and mastery/performance goal orientation were administered as pretests. A preconception test was also administered. The intervention was the students' individual study of the density concept with a worksheet that was designed to incorporate the major steps of conceptual change learning. The tests of attention, effort and conceptual understanding were administered as post-tests. The responses of 203 students who had been found to possess the target misconception were analyzed. The results of a path analysis revealed that students' motivational characteristics variables did not influence cognitive conflict. Failure tolerance and mastery goal orientation, however, influenced conceptual understanding via situational interest, attention and effort. Self-efficacy influenced conceptual understanding via effort. Performance goal orientation negatively influenced conceptual understanding via attention and effort. Cognitive conflict influenced conceptual understanding directly as well as indirectly via situational interest.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.5 no.1
• /
• pp.23-32
• /
• 2002

The introduction of hybrid and exploitation of heterosis has played a vital role in Indian sericulture industry, which clearly depicts a quantum jump in silk production during the last four decades. Since, the introduction of heterosis, progress in silkworm breeding has depended on success or failure in identifying better combiners. Systematic procedures developed have enabled the breeders to identify the best combiners by combining ability test, line ${\TIMES}$ tester analysis or $D^2$ analysis for maximum expression of heterosis. The level of heterosis expressed in the crossbreed population is determined by the interaction between genotype and prevailing environmental factors. Except some of the pre and post cocoon parameters, heterosis is invariably higher in single crosses compared to three-way and double crosses. However, during hot and humid season, when rearing of F1 bivoltine hybrid is unsuccessful at field level and indigenous races results in very low and poor quality yield, three-way and double crosses can play an important role as an intermediary technology. The objective of this article is to review briefly the concept and causes of heterosis, utilization of different forms of heterosis in silk production and its significance in silkworm, Bombyx mori breeding.

• Journal of the Korea Concrete Institute
• /
• v.18 no.4 s.94
• /
• pp.497-506
• /
• 2006

The precast concrete beam-column connectors for the high-rise office buildings were investigated experimentally in this study. The specimens of general precast beam-column connector which is used in a domestic site, specimen of DDC(dywidag ductile connectors) of Germany, and specimen of DDC with post-tensioning and modified DDC with post-tensioning were constructed and tested to verify the safety. The DDC with and without post-tensioning showed reliable joint strength and ductility but failed in critical inclined shear crackings at the column. The modified one showed better behaviors in tests because they did not show critical column crackings at failure. The use of prestressing did not helpful significantly to increase the strength and ductility of connectors but helpful only to develop self-centering behavior for stability.