• 센서학회지
• /
• 제18권6호
• /
• pp.441-448
• /
• 2009

Magnesia partially stabilized zirconia(Mg-PSZ) solid electrolytes for an improvement of thermal shock resistance, which is suitable for the measurement of oxygen activity in a molten steel, were prepared by post-thermal aging treatment. The steelmaking oxygen sensor elements were formed by an injection molding method, sintered at $1650^{\circ}C$, and then thermal aged ranged from 1250 to $1400^{\circ}C$. Sintered density and porosity were decreased as increasing the magnesia content in a zirconia-magnesia solid solution. Fractions of cubic phase to the synthesized Mg-PSZ solid electrolytes were ranged from 13.13 to 79.54.% after post-thermal aging treatment. Very dense microstructure without voids in the grains was obtained by the post-thermal aging process. Fine tetragonal phase crystallites precipitated on the cubic surface during post-thermal aging up to $1300^{\circ}C$ improve a thermal shock resistance and reappearance of electro motive force(EMF) curve.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.846-849
• /
• 2009

In this study, we manufactured polymer-LED using light emitting copolymer as the active layer. After cathode layer deposition, we did post-annealing at $150^{\circ}C$ during 10 min in $N_2$ glove box. Then, we confirmed that the efficiency of the device was significantly enhanced by post annealing process. Its value was increased from 0.18(cd/A) to 1.32(cd/A), approximately 7 times. This phenomenon is a result of improved stability between polymer and metal cathode for injection of electrons as the contact density increases.

• Korean Journal of Radiology
• /
• 제22권7호
• /
• pp.1005-1020
• /
• 2021

Breast augmentation is becoming more common, be it for cosmetic reasons or post-mastectomy. Multiple articles in the literature describe the imaging findings of various types of cosmetic breast augmentation. Some articles describe imaging findings for different types of post-mastectomy reconstructions. This essay aims to serve as a comprehensive reference for the multimodality imaging of various types of breast augmentations in native breast and post-mastectomy reconstructions. Familiarity with these findings will facilitate the detection of complications and new or recurrent breast malignancies in patients. With the extensive illustrations provided in this essay on normal and abnormal imaging findings of augmented breasts, readers will receive exposure that will facilitate effective practice.

• 한국산학기술학회논문지
• /
• 제11권1호
• /
• pp.1-6
• /
• 2010

본 연구에서는 성형해석 및 실험적 방법을 통하여 페트 용기의 두께 편차를 최소화하기 위한 프리폼 최적화 설계를 수행하였다. 사출성형과정을 정확하게 묘사하기 위하여 3차원 모델을 이용하여 충진, 보압 및 냉각해석을 통하여 최적의 프리폼 설계변수를 설정하였으며, 이 결과를 이용하여 블로우 성형해석을 수행하였다. 성형해석결과를 평가하기 위한 사출성형 및 블로우 성형실험을 수행하였으며, 실험결과와 해석결과는 정성적으로 일치하는 것을 확인하였다. 이러한 실험결과 데이타를 설계에 반영함으로서 최적의 프리폼 형상을 얻을 수가 있었다.

• The Korean Journal of Pain
• /
• 제23권4호
• /
• pp.254-257
• /
• 2010

Background: Epidural steroid injection is an established treatment modality for intervertebral disc prolapse to radiculopathy. In cases where two levels of radiculopathy are present, two separate injections are warranted. Herein, we present our experience of management of such cases with a single epidural injection of local anaesthetic, tramadol and methylprednisolone, and table tilt for management of both radiculopathies. Methods: 50 patients of either sex aged between 35-65 years presenting with features of cervical and lumbar radiculopathic pain were included and were subjected to single lumbar epidural injection of local anaesthetic, tramadol and methylprednisolone, in the lateral position. The table was then tilted in the trendelberg position with a tilt of 25 degrees, and patients were maintained for 10 minuted before being turned supine. All patients were administered 3 such injections with an interval of 2 weeks between subsequent injections, and pain relief was assessed with a visual analogue scale. Immediate complications after the block were assessed. Results: Immediate and post procedural complications observed were nausea and vomiting (20%), painful injection site (4%), hypotension (10%) and high block (4%). Pain relief was assessed after the three injections by three grades: 37 (74%) had complete resolution of symptoms; 18% had partial relief and 8% did not benefit from the procedure. Conclusions: This technique may be used as an alternative technique for pain relief in patients with unilateral cervical and lumbar radiculopathies.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권6호
• /
• pp.898-904
• /
• 2006

Effects of sodium bicarbonate (SBC) injection on meat quality and functionality of porcine M. longissimus lumborum were investigated. Fifteen pigs ($100{\pm}5kg$) were randomly selected at a commercial slaughter plant. After slaughtering the loins were dissected from the carcass before chilling at approximately 30 minutes post mortem. The loins were divided into four cuts for sample treatment, and SBC of 0.25 M, 0.40 M and 0.75 M was injected (2% w/w) using a syringe. As SBC injection level was increased, muscle pH increased significantly (p<0.05). SBC injection decreased lightness ($L^*$) values on the surface of muscle. Moreover, with injection of SBC, drip loss %, cooking loss % and shear force were significantly (p<0.05) decreased, whereas WHC and $Na^+$ content were significantly (p<0.05) increased. From panel testing of uncooked pork loin, no significant differences (p>0.05) were found in aroma, off-flavor and drip between injection of SBC at different levels and the control, although color and acceptability were significantly lower (p<0.05) in control pork loin compare with injection of SBC at 0.75 M. In cooked pork loin from the panel test, aroma, flavour, off-flavour and juiciness were found to be similar (p>0.05) on all treatments, but tenderness and acceptability were significantly higher (p<0.05) with injection of SBC at 0.75 M than for control loin. Myofibrillar protein solubility of muscles treated with SBC was significantly (p<0.05) higher than that of the control, although no significant differences (p>0.05) were found in sarcoplasmic protein solubility between the treatments. These results indicated that SBC injection into pre-rigor porcine M. longissimus lumborum could improve ultimate pork quality characteristics such as meat color, water-holding capacity, and could inhibit muscle protein denaturation due to an increase in muscle pH.

• 품질경영학회지
• /
• 제52권1호
• /
• pp.43-56
• /
• 2024

Purpose: The injection molding process, crucial for plastic shaping, encounters difficulties in sustaining product quality when replacing injection machines. Variations in machine types and outputs between different production lines or factories increase the risk of quality deterioration. In response, the study aims to develop a system that optimally adjusts conditions during the replacement of injection machines linked to molds. Methods: Utilizing a dataset of 12 injection process variables and 52 corresponding sensor variables, a predictive model is crafted using Decision Tree, Random Forest, and XGBoost. Model evaluation is conducted using an 80% training data and a 20% test data split. The dependent variable, classified into five characteristics based on temperature and pressure, guides the prediction model. Bayesian optimization, integrated into the selected model, determines optimal values for process variables during the replacement of injection machines. The iterative convergence of sensor prediction values to the optimum range is visually confirmed, aligning them with the target range. Experimental results validate the proposed approach. Results: Post-experiment analysis indicates the superiority of the XGBoost model across all five characteristics, achieving a combined high performance of 0.81 and a Mean Absolute Error (MAE) of 0.77. The study introduces a method for optimizing initial conditions in the injection process during machine replacement, utilizing Bayesian optimization. This streamlined approach reduces both time and costs, thereby enhancing process efficiency. Conclusion: This research contributes practical insights to the optimization literature, offering valuable guidance for industries seeking streamlined and cost-effective methods for machine replacement in injection molding.

• 소성∙가공
• /
• 제11권4호
• /
• pp.332-340
• /
• 2002

The light guide plate of the TFT-LCD reflects the light originated from the light source, and guides the light to the front side of LCD so that we can see images vividly. This paper is concerned with tile injection molding of the light guide plate for the reflective typed LCD related to IMT-2000. The finite element analysis has been carried out based on the pine stress theory to predict both the thermal stresses of the products in the post-filling stage and the in-plane deformation behavior of the products after ejection process. Based on the simulation results, the mold for the light guide plate of a 2inch sized LCD has been designed.

• 한국분무공학회지
• /
• 제11권1호
• /
• pp.30-38
• /
• 2006

High temperature furnaces such as power plant and incinerator contribute considerable part of NOx generation and face urgent demand of De-NOx system. Reducing agent is injected into the flue gas flow to activate do-NOx system. Almost SCR system adopt vaporized ammonia injection system. Vaporizer, dilution system and additional space are needed to gasify and inject ammonia. Liquid spray injection system can simplify and economize post-treatment system of flue gas. In this study, mixing caused by gas or liquid injection of reducing agent into flue gas duct was investigated experimentally. Carbonated water was used as tracer and simulated agent and mixing of liquid spray in a duct flow was studied. To achieve that, the angle of attack of static mixer is simulated and $CO_2$ concentration is measured.

• 한국수정란이식학회지
• /
• 제9권2호
• /
• pp.167-172
• /
• 1994

This experiment was arried out to investigate the development of ea4y rabbit embryos in vivo. Twenty-six New Zealand White does were superovulated by treatment with PMSG(Intervet Co; I. M single injection, 150. U./rabbit) followed 3 day later by simultaneous I.V injection of 100 I.U HCG (Intervet Co, )and natural service with fertile male. All of does was killed at the specific times (24, 27, 30, 36, 42, 50 and 93 h post-hCG) to find out the early embryonic development in vivo respectively. Embryos at the specified stages of development were obtained at the following times after injection of hCG; one-ceH at 24 h, two-cell at 24~27h, four-cell at 27~36 h, morulae at 50 h and early blasto-cyst at 93 h and expanded or hatching blastocyst at 144 h. Number of embryos recovered per rabbit superovulated was 26.1 and average of recovery rate was 83.7%. The results suggest that superovulation was efficient for the increase of embryo number in rabbits, and as shown in results, asynchronous cleavage was prevalent among the recovered embryos.