• Journal of Chest Surgery
• /
• v.43 no.1
• /
• pp.1-10
• /
• 2010

Background: Bioprosthetic materials have been made using glutaraldehyde fixation of porcine or bovine pericardium during cardiovascular surgery. But these bioprostheses have the problems of calcification and mechanical failure. We determined changes in tensile strength and elasticity of pericardium after glutaraldehyde, solvent, decellularization and detoxification. Material and Method: Tissues were allocated to four groups: glutaraldehyde with and without solvent, decellularization, and detoxification. We studied tensile strength and strain on tissues. We measured the tensile strength of fresh pericardium stretched in six directions (with 5 mm width), and % strain, which we calculated from the breaking point when we pulled the pericardium in two directions. Result: Tensile strength was reduced when we used the usual concentrated glutaraldehyde fixation (n=83, $MPa=11.47{\pm}5.40$, p=0.006), but there was no change when we used solvent. Elasticity was increased after glutaraldehyde fixation (n=83, strain $(%)=24.55{\pm}9.81$, p=0.00), but there was no change after solvent. After decellularization of pericardium, the tensile strength was generally reduced. The decrease in tensile strength after concentrated glutaraldehyde fixation for a long time was significantly greater less than after concentrated solvent (p=0.01, p=0.00). After detoxification, the differences in strength and strain were not significant. Conclusion: After glutaraldehyde treatment of pericardium there is no loss in tensile strength (even though we did the glutaraldehyde, solvent and detoxification treatments LOGIC IS UNCLEAR). Also, these treatments had a tendency to increase elasticity. Although post-treatment decellularization led to a significant loss in strength, this effect could be attenuated using a low concentration of solvent or hypertonic solution.

• Korean Journal of Weed Science
• /
• v.30 no.3
• /
• pp.291-299
• /
• 2010

Cyhalofop-butyl and penoxsulam, known for respective acetyl CoA carboxylase (ACCase) and acetolactate synthase (ALS) inhibitor, have been widely using as a post-emergence foliar application for many years in wet-seeded rice field in Korea. Since 2009, control of Echinochloa oryzoides with cyhalofop-butyl and penoxsulam was no longer satisfactory. Greenhouse and experiment in rice field were conducted to confirm E. oryzoides resistance to ACCase and ALS inhibitors and to compare herbicide treatments for control of the resistant E. oryzoides to ACCase and ALS inhibitors. Three resistant E. oryzoides to ACCase and ALS inhibitors accessions were tested for levels of resistance to cyhalofop-butyl and penoxsulam, base on survival rate. Iksan and Kimje accessions were not any affected to the survival by treatment with recommended doses of two herbicides tested. Buan accession displayed an intermediate response of 62 and 72% survival at recommended doses of cyhalofop-butyl and penoxsulam, respectively. Survival rates to herbicides mixed with ACCase and ALS inhibitors at 3.5 leaf stage of E. oryzoides was over 80%. Benzobicyclon+fentrazamide+bensulfuron SC, benzobicyclon+mefenacet+bensulfuron SC, benzobicyclone +cafenstrole+pyrazosulfuron-ethyl GR controlled effectively by 2 leaf stage of resistant E. oryzoides to ACCase and ALS inhibitors. In the field experiment, single treatment of benzobicyclon+ fentrazamide+bensulfuron SC and benzobicyclon+mefenacet+bensulfuron SC failed to control E. oryzoides, but squential treatment of benzobicyclon+thiobencarb SE and benzobicyclon+ mefenacet+ bensulfuron SC controlled effectively it in rice infant seedling culture with machine. Our results suggest that resistant E. oryzoides to ACCase and ALS inhibitors had not developed multiple resistance to herbicides with different modes of action. In particular, cafenstrole, fentrazamide, mefenacet were effective control measures.

• Education of Primary School Mathematics
• /
• v.15 no.2
• /
• pp.107-134
• /
• 2012

The purpose of this study is to investigate the effectiveness of two teaching methods of word problems, one based on mathematical modeling learning(ML) and the other on traditional learning(TL). Additionally, the influence of mathematical modeling learning in word problem solving behavior, application ability of real world experiences in word problem solving and the beliefs of word problem solving will be examined. The results of this study were as follows: First, as to word problem solving behavior, there was a significant difference between the two groups. This mean that the ML was effective for word problem solving behavior. Second, all of the students in the ML group and the TL group had a strong tendency to exclude real world knowledge and sense-making when solving word problems during the pre-test. but A significant difference appeared between the two groups during post-test. classroom culture improvement efforts. Third, mathematical modeling learning(ML) was effective for improvement of traditional beliefs about word problems. Fourth, mathematical modeling learning(ML) exerted more influence on mathematically strong and average students and a positive effect to mathematically weak students. High and average-level students tended to benefit from mathematical modeling learning(ML) more than their low-level peers. This difference was caused by less involvement from low-level students in group assignments and whole-class discussions. While using the mathematical modeling learning method, elementary students were able to build various models about problem situations, justify, and elaborate models by discussions and comparisons from each other. This proves that elementary students could participate in mathematical modeling activities via word problems, it results form the use of more authentic tasks, small group activities and whole-class discussions, exclusion of teacher's direct intervention, and classroom culture improvement efforts. The conclusions drawn from the results obtained in this study are as follows: First, mathematical modeling learning(ML) can become an effective method, guiding word problem solving behavior from the direct translation approach(DTA) based on numbers and key words without understanding about problem situations to the meaningful based approach(MBA) building rich models for problem situations. Second, mathematical modeling learning(ML) will contribute attitudes considering real world situations in solving word problems. Mathematical modeling activities for word problems can help elementary students to understand relations between word problems and the real world. It will be also help them to develop the ability to look at the real world mathematically. Third, mathematical modeling learning(ML) will contribute to the development of positive beliefs for mathematics and word problem solving. Word problem teaching focused on just mathematical operations can't develop proper beliefs for mathematics and word problem solving. Mathematical modeling learning(ML) for word problems provide elementary students the opportunity to understand the real world mathematically, and it increases students' modeling abilities. Futhermore, it is a very useful method of reforming the current problems of word problem teaching and learning. Therefore, word problems in school mathematics should be replaced by more authentic ones and modeling activities should be introduced early in elementary school eduction, which would help change the perceptions about word problem teaching.

• Food Science of Animal Resources
• /
• v.26 no.1
• /
• pp.9-14
• /
• 2006

The aim of this study was to determine the chemical traits of duck meats with different rearing periods(45 70 days). The content of protein was 21.3 and 19.61% in the breast and leg at 70 days post hatched, respectively. Group at 70 days showed high protein composition than those of 45 days group. The content of fat was slightly increased with the rearing periods. The composition of Ca, mineral compound, was not showed the difference between leg and breast meat. However, it was increased with the rearing periods. The composition of Fe was not significantly different in the breast meat. However, there was a significant increase in the leg (p<0.05). It was compared 14.6 ppm at 45 days group to 27.5 ppm at 70 days group. The content of methionine was significantly increased in the breasts due to the increasing rearing periods (p<0.05), but not in leg meat. There was no significant difference between parts, but glutamic acid content was significantly decreased along with the increasing rearing periods (p<0.05). The content of collagen at 70 days(0.77 g/100 g) was higher than those of 45 days(0.65 g/100 g). It was affected by the rearing periods In the wing-removed skit, it was 0.15 g increases at 70 rearing period group. The cholesterol content was significantly increased in the leg but not in the breast. With the rearing periods, it was significantly increased in the leg (p<0.05).

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.94-97
• /
• 2014

Purpose: Standardized uptake value (SUV) is a simple semi-quantitative method that can measure the ratio of the tissue radioactivity between the tumor and normal. SUV is commonly used in PET/CT, however, SUV is affected by various factor. The purpose of this study was to evaluate the impact of the residual activity on SUV depending on the location of catheter insertion device post injection. Materials and Methods: NEMA IEC Body Phantom was imaged using a Discovery 600 PET scanner. In 22 mm diameter sphere, the different activity of $^{18}F-FDG$ (7.4, 14.8, 22.2, 29.6, 37, 55.5 MBq) was filled and background was filled with $^{18}F-FDG$ (5.7 kBq/mL). We scaned the phantom on the assumption that the radioactivity in sphere was residual activity in insertion device. Simulation of PET was divided into three groups based on the location of sphere in Scan FOV (SFOV); inclusion, 1/2 inclusion and exclusion group. Results: Among three groups, the group of excluded sphere showed the highest SUV regardless of the amount of $^{18}F-FDG$ activity. In case of 7.4 MBq, average SUV of inclusion group, 1/2 inclusion and exclusion group was 0.780, 0.840 and 0.896 respectively. However, average SUV of 55.5 MBq showed 0.372, 0.460 and 0.508 with same order. Depend on residual radioactivity in the sphere and position of sphere, the SUV was different minimum of 10.4%, maximum of 62.8%. Conclusion: This study showed that SUV is underestimated as the residual radio-activity is increased. In addition, SUV was a changed according to the position of residual radio-activity. And among the position, exclusion group showed the difference of SUV was lowest. If we measure the residual radio-activity of inserting devices and radio-activity from extra-vasation in the patients, it seems to be more useful in clinical field.

• Journal of Chest Surgery
• /
• v.40 no.10
• /
• pp.659-666
• /
• 2007

Background: Preserving the subvalvular apparatus after mitral valve replacement (MVR) results in better ventricular function and a better outcome. In conjunction, mitral valve repair (MVr) is associated with a better outcome, yet little is known about the hemodynamics and outcomes between patients undergoing MVr and MVR with chordal preservation. We prospectively evaluated the hemodynamic changes and outcomes of patients undergoing MVr and MVR with chordal preservation. Material and Method: Fifty-four patients with mitral regurgitation (MR) who under-went MVR with chordal preservation (n=21) or MVr (n=33) were studied. The patients' characteristics, the intra-and postoperative hemodynamics and the use of cardiac medications, the postoperative outcome and the complications were recorded during the hospital stay. All the patients were followed up for at least 6 months post-operatively for determining their morbidity and mortality. Result: The patients' characteristics were similar between the groups, except for the presence of atrial fibrillation and congestive heart failure which was more frequent in the MVR group. Also, the preoperative left ventricular ejection fraction was lower in the MVR group than in the MVr group ($64{\pm}9%$ versus $69{\pm}5%$, respectively, p=0.043). There were no significant differences of the hemodynamics between the groups. The use of inotropic drugs and pacemakers during the 12hrs postoperatively was more common in the MVR group than in the MVr group (48% versus 24%, p=0.025 and 52% versus 24%, p=0.035, respectively). The other postoperative outcomes were similar in both groups for at least the 6 months follow-up period. Conclusion: MVR with chordal preservation was comparable with regard to the hemodynamics and clinical outcomes, supporting the beneficial effect of preserving the subvalvular apparatus after MVR.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.10 no.1
• /
• pp.17-24
• /
• 2008

This study was performed to estimate non-$CO_2$ greenhouse gases (i.e., GHGs) emission from biomass burning at a local scale. Estimation of non-$CO_2$ GHGs emission was conducted using Landsat TM satellite imagery in order to assess the damage degree in burnt area and its effect on non-$CO_2$ GHGs emission. This approach of estimation was based on the protocol of the 2003 IPCC Guidelines. In this study, we used one of the most severe fire cases occurred Samcheock in April, 2004. Landsat TM satellite imageries of pre- and post-fire were used 1) to calculate delta normalized burn ratio (dNBR) for analyzing burnt area and burn severity of the Samcheok large-fire and 2) to quantify non-$CO_2$ GHGs emission from different size of the burnt area and the damage degree. The analysis of dNBR of the Samcheok large-fire indicated that the total burnt area was 16,200ha and the size of the burnt area differed with the burn severity: out of the total burnt area, the burn severities of Low (dNBR < 152), Moderate (dNBR = 153-190), and High (dNBR = 191-255) were 35%, 33%, and 32%, respectively. It was estimated that the burnt areas of coniferous forest, deciduous forest, and mixed forest were about 11,506ha (77%), 453ha (3%), and 2,978ha (20%), respectively. The magnitude of non-$CO_2$ GHGs emissions from the Samcheok large-fire differed significantly, showing 93% of CO (44.100Gg), 6.4% of CH4 (3.053Gg), 0.5% of $NO_x$ (0.238Gg), and 0.1% of $N_2O$ (0.038Gg). Although there were little changes in the total burnt area by the burn severity, there were differences in the emission of non-$CO_2$ GHGs with the degree of the burn severity. The maximum emission of non-$CO_2$ GHGs occurred in moderate burn severity, indicating 47% of the total emission.

• Journal of Animal Science and Technology
• /
• v.53 no.2
• /
• pp.89-97
• /
• 2011

In this study, the efficiency of microsatellite (MS) markers for pork quality was examined and further, their suitability to domestic pork industry also was verified, by measuring meat quality parameters of Berkshire breeds. A total of 323 pigs of Berkshire breeds were slaughtered and subjected to meat quality evaluation. In addition, the genomic DNAs from blood samples of slaughtered pigs were used for genotyping analysis of 50 MS markers. The results revealed that Berkshire breeds have excellent meat quality, compared with the popular domestic breeds such as Duroc, Yorkshire, and Landrace. Noticeably, the Berkshire breeds exhibited a significant post-mortem pH24hr ($5.88{\pm}0.01$) and fat content ($2.878{\pm}0.06$). Through the linkage analysis between MS markers, 14 MS markers showed significant association with meat quality traits (p<0.05). Maximum significant differences of 0.55 pH24hr value and 2.04% fat content were observed between the highest and lowest allele populations. If these 14 MS markers are applied to the pork quality diagnosis kit, the synergistic effect can be expected in meat quality parameters such as meat color, fat content, pH 24 hr, cooking loss, drip loss and water-holding capacity.

• Journal of Life Science
• /
• v.25 no.5
• /
• pp.523-532
• /
• 2015

A variety of previous pharmacological studies have suggested Liriope platyphylla (L. platyphylla) may exert beneficial biological effects on inflammation, diabetes, neurodegenerative disorder, obesity, constipation, and atopic dermatitis. In addition, hydrocolloid membranes (HCMs) have attracted attention in dermatological care, including in the treatment of scleroderma skin ulcers, cutaneous ulcers, permanent tympanic membrane perforations, pressure sores, and decubitus ulcers in the elderly. To investigate the therapeutic effects of HCM containing an aqueous extract of L. platyphylla (HCM-LP) on second-degree burn wounds, their physico-chemical properties were analyzed and the therapeutic effects were observed in SD rats after treatment with HCM-LP for 14 days. Significant declines in tensile strength (38.4%) and absorptiveness (46.3%), as well as an increase in surface roughness (38.1%) were detected in HCM-LP compared with that of HCM. In SD rats with burned skin, the wound diameter was shorter in the HCM-LP treated group than in the GZ group on post-surgical day 14, while the significant improvements in scar tissue reduction, epithelium regeneration, angiogenesis, and extracellular matrix deposition were observed in the HCM-LP-treated group during all experimental periods. Overall, these results suggest HCM-LP may accelerate the process of healing the burn injury skin of SD rats through the regulation of angiogenesis and connective tissue formation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.53 no.4
• /
• pp.295-300
• /
• 2015

Purpose: The aim of this study was to evaluate the shear bond strength between Ni-Cr alloy and composite resin using universal adhesive systems coMPared to conventional method using metal primers. Materials and methods: For this study, a total of 120 cast commercial Ni-Cr alloy (Vera Bond 2V) disks were embedded in acrylic resin, and their surfaces were smoothed with silicon carbide papers and airborne-particle abrasion. Specimens of each metal were divided into 6 groups based on the combination of metal primers (Metal primer II, Alloy primer, Metal & Zirconia primer, MKZ primer) and universal adhesive systems (Single Bond Universal, All Bond Universal). All specimens were stored in distilled water at $37^{\circ}C$ for 24 hours. Shear bond strength testing was performed with a universal testing machine at a cross head speed of 1 m/min. Data (MPa) were analyzed using one-way ANOVA and the post hoc Tukey's multiple comparison test (${\alpha}$=.05). Results: There were significant differences between Single Bond Universal, All Bond Universal, Metal Primer II and Alloy Primer, MKZ Primer, Metal & Zirconia Primer (P<.001). Conclusion: Universal Adhesive system groups indicated high shear bond strength value bonded to Ni-Cr alloy than that of conventional system groups using primers except Metal Primer II. Within the limitations of this study, improvement of universal adhesive systems which can be applied to all types of restorations is recommended especially non-precious metal alloy. More research is needed to evaluate the effect of silane inclusion or exclusion in universal adhesive systems.