• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.122-129
• /
• 2014

Due to remarkable market growth of smart devices, higher performance and more functionalities are required for a core system-on-chip (SoC), and thus the power demand is rapidly increasing. However, aggressive shrink of CMOS transistor have brought severe process variations thereby adversely affected the performance and power consumption under strict power constraint. Voltage binning (VB) scheme is one of the effective post silicon tuning techniques, which can reduce parametric yield loss due to process variations by adjusting supply voltage. In this paper, an optimal supply voltage tuning based voltage binning technique is proposed to reduce average power without an additional yield loss. Considering the different LVCC margins of process corners along with speed and leakage characteristics, the proposed method can optimize the deviation of voltage margin and thus save power consumption. When applying on a 30nm mobile SoC product, the experimental results showed that the proposed technique reduced average power consumption up to 6.8% compared to traditional voltage binning under the same conditions.

• The Journal of Advanced Prosthodontics
• /
• v.5 no.2
• /
• pp.126-132
• /
• 2013

PURPOSE. Post surface conditioning is necessary to expose the glass fibers to enable bonding between fiber post and resin cement. The purpose of the present study was to evaluate the effect of different surface conditioning on tensile bond strength (TBS) of a glass fiber reinforced post to resin cement. MATERIALS AND METHODS. In this in vitro study, 40 extracted single canal central incisors were endodontically treated and post spaces were prepared. The teeth were divided into four groups according to the methods of post surface treatment (n=10): 1) Silanization after etching with 20% $H_2O_2$, 2) Silanization after airborne-particle abrasion, 3) Silanization, and 4) No conditioning (Control). Adhesive resin cement (Panavia F 2.0) was used for cementation of the fiber posts to the root canal dentin. Three slices of 3 mm thick were obtained from each root. A universal testing machine was used with a cross-head speed of 1 mm/minute for performing the push-out tests. Two-way ANOVA and Tukey post hoc tests were used for analyzing data (${\alpha}$=0.05). RESULTS. It is revealed that different surface treatments and root dentin regions had significant effects on TBS, but the interaction between surface treatments and root canal regions had no significant effect on TBS. There was significant difference among $H_2O_2$ + Silane Group and other three groups. CONCLUSION. There were significant differences among the mean TBS values of different surface treatments. Application of hydrogen peroxide before silanization increased the bond strength between resin cements and fiber posts. The mean TBS mean values was significantly greater in the coronal region of root canal than the middle and apical thirds.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.792-801
• /
• 1996

A thinning algorithm -based image analysis technique was developed to measure corn root lengths. The root length measurement method was evaluated by comparing thread lengths measured by the image analysis system with actual thread lengths. The length measurement method accurately estimated actual thread lengths (less than 2% calculated error). Also, a rapid root length density measurement procedure, which utilizes the above root length measurement method, was developed to estimate corn root length density without washing the roots. Root length densities estimated from the cut soil surface of core samples taken from the field were paired with the root length densities determined from washed roots from the same soil core sample. A linear relationship between these two values was expected and was found. Eliminating the root washing procedure reduces the time required for measuring corn root length density substantially.

• Animal cells and systems
• /
• v.3 no.3
• /
• pp.337-341
• /
• 1999

Hepatitis C virus (HCV) is a positive strand RNA virus of the Flaviviridae family and the major cause of post-transfusion non-A, non-B hepatitis. Vaccine development for HCV is essential but has been slowed by poor understanding of the type of immunity that naturally terminates HCV infection. The DNA-based immunization technique offers the potential advantage of including cellular immune responses against conserved internal proteins of a virus, as well as the generation of antibodies to viral surface proteins. Here, we demonstrate that cell lines expressing the HCV core and/or NS3 proteins can induce a specific CTL response in mice, and these results suggest a possibility that the HCV core and NS3 DNA can be used to induce CTL activity against the antigen in mice and can be further developed as a therapeutic and preventive DNA vaccine.

• Computers and Concrete
• /
• v.21 no.6
• /
• pp.607-622
• /
• 2018

A non-linear finite element model (FEM) was constructed using a three-dimensional software (ATENA-3D) to investigate the effect of strengthening on the behavior of prestressed hollow-core (PHC) slabs with or without openings. The slabs were strengthened using near surface mounted (NSM)-carbon fiber reinforced polymer (CFRP) strips. The constructed model was validated against experimental results that were previously reported by the authors. The validated FEM was then used to conduct an extensive parametric study to examine the influence of prestressing reinforcement ratio, compressive strength of concrete and strengthening reinforcement ratio on the behavior of such slabs. The FEM results showed good agreement with the experimental results where it captured the cracking, yielding, and ultimate loads as well as the mid-span deflection with a reasonable accuracy. Also, an overall enhancement in the structural performance of these slabs was achieved with an increase in prestressing reinforcement ratio, compressive strength of concrete, external reinforcement ratio. The presence of openings with different dimensions along the flexural or shear spans reduced significantly the capacity of the PHC slabs. However, strengthening these slabs with 2 and 4 (64 and $128mm^2$ that represent reinforcement ratios of 0.046 and 0.092%) CFRP strips was successful in restoring the original strength of the slab and enhancing post-cracking stiffness and load carrying capacity.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.1935-1946
• /
• 2022

The investigations of the coated-particles of nuclear fuel samples are carried out in three stages: front-end, irradiation in the reactor core, and post-irradiation examination. The front-end stage is the initial analysis of the failures rates of produced samples before they are placed in the reactor core. The purpose of the verification is to prepare the particles for an experiment that will determine the degree of damage to the coated particles at each stage. Before starting experiments with the samples, they must be properly prepared. Polishing the samples in order to uncover the inner layers is an important, initial experimental step. The authors of this paper used a novel way to prepare samples for testing - by applying an ion polisher. Mechanical polishing used frequently for sample preparations generates additional mechanical damages in the studied fuel particle, thus directly affecting the experimental results. The polishing methods were compared for three different coated particles using diagnostic methods such as Raman spectroscopy, scanning electron microscopy, and confocal laser scanning microscopy. Based on the obtained results, it was concluded that the ion polishing method is better because the level of interference with the structures of the individual layers of the tested samples is much lower than with the mechanical method. The same technique is used for the fuel particles undergone ion implantation simulating radiation damage that can occur in the reactor core.

• Restorative Dentistry and Endodontics
• /
• v.42 no.1
• /
• pp.27-33
• /
• 2017

Objectives: To determine the optimal timing for post space preparation of root canals sealed with epoxy resin-based AH Plus sealer in terms of its polymerization and influence on apical leakage. Materials and Methods: The epoxy polymerization of AH Plus (Dentsply DeTrey) as a function of time after mixing (8, 24, and 72 hours, and 1 week) was evaluated using Fourier transform infrared (FTIR) spectroscopy and microhardness measurements. The change in the glass transition temperature ($T_g$) of the material with time was also investigated using differential scanning calorimetry (DSC). Fifty extracted human single-rooted premolars were filled with gutta-percha and AH Plus, and randomly separated into five groups (n = 10) based on post space preparation timing (immediately after root canal obturation and 8, 24, and 72 hours, and 1 week after root canal obturation). The extent of apical leakage (mm) of the five groups was compared using a dye leakage test. Each dataset was statistically analyzed by one-way analysis of variance and Tukey's post hoc test (${\alpha}=0.05$). Results: Continuous epoxy polymerization of the material with time was observed. Although the $T_g$ values of the material gradually increased with time, the specimens presented no clear $T_g$ value at 1 week after mixing. When the post space was prepared 1 week after root canal obturation, the leakage was significantly higher than in the other groups (p < 0.05), among which there was no significant difference in leakage. Conclusions: Poor apical seal was detected when post space preparation was delayed until 1 week after root canal obturation.

• Restorative Dentistry and Endodontics
• /
• v.42 no.4
• /
• pp.324-331
• /
• 2017

Objectives: This study evaluated smear layer removal by different chemical solutions used with or without ultrasonic activation after post preparation. Materials and Methods: Forty-five extracted uniradicular human mandibular premolars with single canals were treated endodontically. The cervical and middle thirds of the fillings were then removed, and the specimens were divided into 9 groups: G1, saline solution (NaCl); G2, 2.5% sodium hypochlorite (NaOCl); G3, 2% chlorhexidine (CHX); G4, 11.5% polyacrylic acid (PAA); G5, 17% ethylenediaminetetraacetic acid (EDTA). For the groups 6, 7, 8, and 9, the same solutions used in the groups 2, 3, 4, and 5 were used, respectively, but activated with ultrasonic activation. Afterwards, the roots were analyzed by a score considering the images obtained from a scanning electron microscope. Results: EDTA achieved the best performance compared with the other solutions evaluated regardless of the irrigation method (p < 0.05). Conclusions: Ultrasonic activation did not significantly influence smear layer removal.

• Journal of Oriental Neuropsychiatry
• /
• v.34 no.3
• /
• pp.307-317
• /
• 2023

Objectives: To introduce the progress of treatment and improve clinical use after application of Emotion-to-Emotion Therapy (ETE Therapy) for treating Post-traumatic Stress Disorder (PTSD). Methods: A patient who was diagnosed with PTSD that occurred after violence in the family mainly complained about abdominal pain, depression, and fear. We treated the patient with ETE therapy as the main treatment. Subjective Units of Distress scale (SUDs), The Core Seven-Emotions Inventory Short Form (CSEI-s), and Mentalizing the Rooms of Mind (MRM) were evaluated before and after the treatment for assessing the clinical effect. Results: After treatment, overall clinical symptoms of the patient were alleviated. This result was supported by a decrease in SUDs. There were meaningful drops in 'Fear', 'Fright', 'Sorrow' in CSEI-s scores, consistent with the direction of 'Sa-seung-Gong (思勝恐)' used as major technique of ETE therapy. Resources and positive emotions in MRM were increased after treatment. Conclusions: ETE therapy may be effective for treating PTSD. It might play a significant role in cognitive reconstruction.

• Journal of Oriental Neuropsychiatry
• /
• v.35 no.2
• /
• pp.177-189
• /
• 2024

Objectives: This study aimed to evaluate the impact of Resource Mindfulness on participants' emotional state, focusing on anxiety and stress reduction and to explore the importance of psychological resources in this process. The effectiveness of Resource Mindfulness was investigated through both quantitative and qualitative analyses, examining its influence on subjective distress, mindfulness, core emotions, and identification of personal resources. Methods: This study involved 27 participants, including Korean medicine students, psychological counselors, clinical psychologists, and Korean medicine specialists, who attended a 2-night, 3-day M&L psychological support education program from July 2 to July 4, 2022. Participants were informed of the study's purpose and procedures. They provided written consent. Quantitative measures included Subjective Units of Disturbance Scale (SUDS), Five Facet Mindfulness Questionnaire (FFMQ), and Core Seven-Emotions Inventory Short Form (CSEI-s). Qualitative analysis was conducted using the "Drawing the Rooms of the Mind" technique. Pre- and post-program assessments were conducted to compare changes in subjective distress, mindfulness, and core emotions. Data were analyzed using paired t-tests and qualitative content analysis methods. Results: Significant reductions in subjective distress and improvements in mindfulness components were observed. Core emotions showed significant decreases in negative emotions. Qualitative analysis revealed increased tranquility, relief, and confidence, with resourceful places often being nature-related. Conclusions: Resource Mindfulness effectively reduced anxiety and stress and enhanced self-awareness and self-efficacy. It is useful for managing various mental health issues. Further research is needed to generalize these findings.