• 정보보호학회논문지
• /
• 제28권5호
• /
• pp.1099-1112
• /
• 2018

미래에 양자컴퓨터가 상용화될 것을 대비하여 전 세계적으로 양자컴퓨터에도 안전한 후 양자 암호(post quantum cryptography)에 대한 연구가 활발히 진행되고 있다. 그중 빠른 속도와 높은 안전성을 제공하는 부호 기반 암호시스템에 대하여 다양한 부채널 분석에 대한 취약점이 발견되고 있으며, 이에 따라 부채널 분석에 안전한 암호시스템 설계를 위한 연구가 진행되고 있다. 본 논문에서는 HyMES(Hybrid McEliece Scheme)에 대해 단 하나의 파형만을 이용하여 비밀키를 복원하는 방법을 제안한다. HyMES는 기존에 제안되었던 McEliece에 비해 키 크기가 작고, 암복호화 속도 또한 기존보다 빠르게 설계된 부호 기반 공개키 암호시스템이다. HyMES 복호화 알고리즘에는 신드롬 값 계산에 필요한 패리티 검사 행렬(parity-check matrix)을 연산하는 과정이 있다. 본 논문에서는 이 과정에서 사용되는 비선형 함수에 대한 결합 확률 분포가 비밀키 값에 따라 달라짐을 이용하여 HyMES를 분석하였다. 공개키 암호를 대상으로 한 결합 확률 분포 기반 분석은 본 논문에서 처음으로 제안되었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.134-134
• /
• 2011

High-k dielectric materials such as $HfO_2$, $ZrO_2$ and $Al_2O_3$ increase gate capacitance and reduce gate leakage current in MOSFET structures. This behavior suggests that high-k materials will be promise candidates to substitute as a tunnel barrier. Furthermore, stack structure of low-k and high-k tunnel barrier named variable oxide thickness (VARIOT) is more efficient.[1] In this study, we fabricated the $WSi_2$ nanocrystals nonvolatile memory device with $SiO_2/HfO_2/Al_2O_3$ tunnel layer. The $WSi_2$ nano-floating gate capacitors were fabricated on p-type Si (100) wafers. After wafer cleaning, the phosphorus in-situ doped poly-Si layer with a thickness of 100 nm was deposited on isolated active region to confine source and drain. Then, on the gate region defined by using reactive ion etching, the barrier engineered multi-stack tunnel layers of $SiO_2/HfO_2/Al_2O_3$ (2 nm/1 nm/3 nm) were deposited the gate region on Si substrate by using atomic layer deposition. To fabricate $WSi_2$ nanocrystals, the ultrathin $WSi_2$ film with a thickness of 3-4 nm was deposited on the multi-stack tunnel layer by using direct current magnetron sputtering system [2]. Subsequently, the first post annealing process was carried out at $900^{\circ}C$ for 1 min by using rapid thermal annealing system in nitrogen gas ambient. The 15-nm-thick $SiO_2$ control layer was deposited by using ultra-high vacuum magnetron sputtering. For $SiO_2$ layer density, the second post annealing process was carried out at $900^{\circ}C$ for 30 seconds by using rapid thermal annealing system in nitrogen gas ambient. The aluminum gate electrodes of 200-nm thickness were formed by thermal evaporation. The electrical properties of devices were measured by using a HP 4156A precision semiconductor parameter analyzer with HP 41501A pulse generator, an Agillent 81104A 80MHz pulse/pattern generator and an Agillent E5250A low leakage switch mainframe. We will discuss the electrical properties for application next generation non-volatile memory device.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2011년도 추계학술발표대회
• /
• pp.7-7
• /
• 2011

Quantum beam technology has been expected to develop breakthroughs for nanotechnology during the third basic plan of science and technology (2006~2010). Recently, Green- or Life Innovations has taken over the national interests in the fourth basic science and technology plan (2011~2015). The NIMS (National Institute for Materials Science) has been conducting the corresponding mid-term research plans, as well as other national projects, such as nano-Green project (Global Research for Environment and Energy based on Nanomaterials science). In this lecture, the research trends in Japan and NIMS are firstly reviewed, and the typical achievements are highlighted over key nanotechnology fields. As one of the key nanotechnologies, the quantum beam research in NIMS focused on synchrotron radiation, neutron beams and ion/atom beams, having complementary attributes. The facilities used are SPring-8, nuclear reactor JRR-3, pulsed neutron source J-PARC and ion-laser-combined beams as well as excited atomic beams. Materials studied are typically fuel cell materials, superconducting/magnetic/multi-ferroic materials, quasicrystals, thermoelectric materials, precipitation-hardened steels, nanoparticle-dispersed materials. Here, we introduce a few topics of neutron scattering and ion beam nanofabrication. For neutron powder diffraction, the NIMS has developed multi-purpose pattern fitting software, post RIETAN2000. An ionic conductor, doped Pr2NiO4, which is a candidate for fuel-cell material, was analyzed by neutron powder diffraction with the software developed. The nuclear-density distribution derived revealed the two-dimensional network of the diffusion paths of oxygen ions at high temperatures. Using the high sensitivity of neutron beams for light elements, hydrogen states in a precipitation-strengthened steel were successfully evaluated. The small-angle neutron scattering (SANS) demonstrated the sensitive detection of hydrogen atoms trapped at the interfaces of nano-sized NbC. This result provides evidence for hydrogen embrittlement due to trapped hydrogen at precipitates. The ion beam technology can give novel functionality on a nano-scale and is targeting applications in plasmonics, ultra-fast optical communications, high-density recording and bio-patterning. The technologies developed are an ion-and-laser combined irradiation method for spatial control of nanoparticles, and a nano-masked ion irradiation method for patterning. Furthermore, we succeeded in implanting a wide-area nanopattern using nano-masks of anodic porous alumina. The patterning of ion implantation will be further applied for controlling protein adhesivity of biopolymers. It has thus been demonstrated that the quantum beam-based nanotechnology will lead the innovations both for nano-characterization and nano-fabrication.

• 한국진공학회지
• /
• 제20권5호
• /
• pp.339-344
• /
• 2011

C-plane 사파이어 기판 위에 펄스 레이저 증착법으로 증착시킨 n-type ZnO 박막에 대한 Ti/Au 금속의 Ohmic 접합특성을 TLM (transfer length method) 패턴 전극을 통하여 연구하였다. 여기서, Ti와 Au 금속박막은 전자빔 증착기와 열 증착기로 각각 35 nm와 90 nm 두께로 증착하였으며, TLM패턴은 광 리소그래피 법으로 면적이 $100{\times}100{\mu}m^2$인 전극패턴을 6~61 ${\mu}m$ 간격으로 형성하였다. Ti/Au 금속박막과 ZnO 반도체 사이의 전기적인 성질을 개선하고 응력과 계면 결함을 감소시키기 위해, 산소 가스 분위기로 $100{\sim}500^{\circ}C$ 온도에서 각각 1분간 급속열처리를 하였다. $300^{\circ}C$의 온도에서 열처리한 시료에서 $1.1{\times}10^{-4}{\Omega}{\cdot}cm^2$의 가장 낮은 비저항 값을 보였는데, 이것은 열처리 동안 티타늄 산화막 형성과정에서 ZnO 박막 표면 근처에 산소빈자리가 형성됨으로써 나타나는 전자농도의 증가가 주된 원인으로 고려되었다.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.312-312
• /
• 2022

Peanut hull as by-product has been discarded during peanut processing. However, peanut hull contains plenty of polyphenols that shows various physiological activities. The objectives of this study were to investigate anti-inflammatory and enzyme inhibitory activities of polyphenols from 'Sinpalkwang' peanut (Arachis hypogaea L.) hull. Compounds were isolated from methanol extracts of peanut hull by preparative-high performance liquid chromatography after identifying and quantifying polyphenols using Ultra performance liquid chromatography (UPLC) and UPLC-Quadrupole time-of-flight-mass spectrometry profiling. The structures of compounds were elucidated by one-dimensional [¹H, ¹³C] nuclear magnetic resonance (NMR) and two-dimensional NMR (correlated spectroscopy, heteronuclear single quantum coherence and heteronuclear multiple bond correlation). Three compounds were identified as 5,7-dihydroxy-4H-chromen-4-one (peak 2), luteolin (peak 4) and eriodictyol (peak 5). Significant differences in inflammatory mediator such as nitric oxide (NO), interleukin-6 (IL-6) and interleukin-1β (IL-lβ) in lipopolysaccharide stimulated Raw 264.7 macrophages and in enzyme (xanthine oxidase [XO] and α-glucosidase [AG]) inhibitory activities were observed between three compounds (p < 0.05). Peak 5 treated Raw 264.7 macrophages showed lower content of NO (16.4 uM), IL-6 (7.0 ng/mL), and IL-1β (60.6 pg/mL) than peak 2 (NO: 28.3 uM, IL-6: 11.3 ng/mL, IL-1β: 66.9 pg/mL) and peak 4 (NO: 24.7 uM, IL-6: 9.3 ng/mL, IL-1β: 62.6 pg/mL). Peak 5 showed higher XO inhibitory activity (84.7%) and higher AG inhibitory activity (52.4%) than peak 2 (XO inhibitory activity: 45.4%, AG inhibitory activity: 21.6%) and peak 4 (XO inhibitory activity: 37.9%, AG inhibitory activity: 37.5%) at concentration of 0.5mg/mL. This study suggests that peanut hull could be a potential source of anti-inflammatory and physiological materials while creating new use of discarded peanut hull as by-products concomitantly.

• ETRI Journal
• /
• 제17권1호
• /
• pp.1-10
• /
• 1995

We have achieved very low threshold current densities with high light output powers for InGaAs/ GaAs surface-emitting lasers using a periodic gain active structure in which three quantum wells are inserted in two-wavelength-thick (2${\lambda}$ ) cavity. Air-post type devices with a diameter of 20~40${\mu}m$ exhibit a threshold current density of 380~410$A/cm^2$. Output power for a 40${\mu}m$ diameter device reaches over 11 mW. A simple theoretical calculation of the threshold and power performances indicates that the periodic gain structure has an advantage in achieving low threshold current density mainly due to the high coupling efficiency between gain medium and optical field. The deterioration of power, expected from the long cavity length of $2{\lambda}$, is negligible.

• 한국진공학회지
• /
• 제12권S1호
• /
• pp.17-20
• /
• 2003

We have studied magnetic and structural properties of ultrathin Ni films grown on PI(lII) surface using in situ surface magneto-optic Kerr effect and X-ray photoelectron spectroscopy. Perpendicular magnetic anisotropy was absent, and longitudinal Kerr signal was only detectable for Ni films thicker than 6 monolayers. Enhancement in longitudinal Kerr signal by 30% was achieved by post-annealing at temperatures below 800K, but upon annealing at 820K, surface alloy was formed. By using core-level binding-energy shifts, the composition was determined to be Ni 70 at. %.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권5호
• /
• pp.2792-2810
• /
• 2017

Forward-secure signature is a specific type of signature, which can mitigate the damage caused by the signing key exposure. Most of the existing forward-secure (identity-based) signature schemes can update users' secret keys at each time period, achieve the existential unforgeability, and resist against classical computer attacks. In this paper, we first revisit the framework of forward-secure identity-based signatures, and aim at supporting flexible key update at multi time period. Then we propose a post-quantum forward-secure identity-based signature scheme from lattices and use the basis delegation technique to provide flexible key update. Finally, we prove that the proposed scheme is strongly unforgeable under the short integer solution (SIS) hardness assumption in the random oracle model.

• Nuclear Engineering and Technology
• /
• 제46권2호
• /
• pp.159-168
• /
• 2014

In order to advance understanding of the breakaway swelling behavior of U-Mo/Al dispersion fuel under a high-power irradiation condition, the effects of fuel-matrix interaction on the fuel performance of U-Mo/Al dispersion fuel were investigated. Fission gas release into large interfacial pores between interaction layers and the Al matrix was analyzed using both mechanistic models and observations of the post-irradiation examination results of U-Mo dispersion fuels. Using the model predictions, advantageous fuel design parameters are recommended to prevent breakaway swelling.

• Kyungpook Mathematical Journal
• /
• 제61권1호
• /
• pp.75-98
• /
• 2021

In this paper, we introduce new classes of post-quantum or (p, q)-starlike and convex functions with respect to symmetric points associated with a cardiod-shaped domain. We obtain (p, q)-Fekete-Szegö inequalities for functions in these classes. We also obtain estimates of initial (p, q)-logarithmic coefficients. In addition, we get q-Bieberbachde-Branges type inequalities for the special case of our classes when p = 1. Moreover, we also discuss some special cases of the obtained results.