• 한국의류학회지
• /
• 제36권3호
• /
• pp.324-334
• /
• 2012

In this research, the dyeing properties of $Lycopus$ $lucidus$ Turcz on cotton and silk fabrics were evaluated to establish a scientific database of natural dyes. The optimum dyeing conditions were identified with K/S values depending on the dyeing concentration, temperature, time, and pH. For the optimum conditions, the color changes for different synthetic mordants were observed as L, $a^*$, $b^*$ and H, V, C. The color fastness after dyeing and mordanting was also examined. Additionally, the antibiosis of $Lycopus$ $lucidus$ Turcz was examined. The results were as follows: For the cotton, the optimized dyeing conditions were 300% (o.w.f.), $50^{\circ}C$, 40 min., and pH 5. For the silk fabric, the conditions were 450% (o.w.f.), $70^{\circ}C$, 60 min., and pH 4. The K/S value of dyed cotton improved about 1.03-2.78 folds after mordanting. The fabric color was yellow in the absence of mordanting, while it was reddish yellow after post-mordanting with FFC. Although the color changed with the mordanting method and mordant, the overall hue was yellow. Thus, $Lycopus$ $lucidus$ Turcz appears to have the potential for use as a natural dyeing material for a yellow hue. The K/S value of the dyed silk fabric improved about 1.05-1.40 folds after mordanting. The fabric showed a reddish yellow color when pre-mordanted with Al and Cu. The washing and dry-cleaning fastness of the cotton and silk fabrics were at the 4-5 level. The light fastness of the cotton improved after mordanting; however, pre-mordanting was more effective than post-mordanting or the absence of mordanting. The dyed cotton, silk fabrics showed excellent antibiosis.

• 한국의류산업학회지
• /
• 제11권6호
• /
• pp.953-960
• /
• 2009

The natural dyeing of fabrics with myrobalan extract was investigated. After dyeing of silk, cotton and rayon with myrobalan extract, the dyeability of myrobalan extract was evaluated with the conditions of concentration, temperature, time, repeat-numbers, pH, mordants variables, the changes of dyeability and surface colors by methods of mordanting and color fastness. The wavelength of maximum absorption of the colored solution from myrobalan extract appeared at 272 nm. Therefore, the substance of myrobalan extract was verified as tannin dyes. The optimum dyeing of fabrics was carried out at 30%(o.w.f) dye concentration. Silk fabrics dyed with myrobalan extract showed the highest K/S value at the temperature of $80^{\circ}C$ when it was dyed for seventy minutes, while cotton and rayon fabrics showed the highest K/S value at the temperature of $90^{\circ}C$ when they were dyed for seventy minutes and thirty minutes, respectively. Dyeing operation was carried out in acidic dyebath of pH 3. The K/S value of silk fabric was higher in pre-mordant stage than in post-mordant, while the K/S values of cotton and rayon fabrics were higher in post-mordant stage. The surface colors of dyed fabrics were different according to used mordants: Al and Cu mordanted fabrics were dyed in yellowish colors, while Fe mordanted fabric was dyed in khaki-black color. Light-fastness of the color fastness was improved in Fe-mordant. Washing-fastness was relatively good, and dry cleaning-fastness of dyed fabrics was excellent.

• 대한치과의사협회지
• /
• 제56권5호
• /
• pp.254-262
• /
• 2018

Objectives: This study aimed to compare the postoperative pain and clinical performance after applying three different intracanal medicaments and root canal sealers. Materials and Methods: Sixty-five patients requiring root canal treatment due to symptomatic apical periodontitis were included in this study. After a glide path preparation by using PathFile, each canal was shaped with ProTaper Next file system. After the canal cleaning and shaping procedure, the canal was dried and each intracanal medicaments were adjusted (Calcipex II, TRC-paste, Metapaste). At the next visit, the patients were requested to answer the absence of the pain after the procedure. Once the patients showed no symptom, the canal was obturated with each corresponded root canal sealers (AH plus, Radic-sealer, ADseal). The patients were recalled after 1 week, 1, 3, and 6 months to check the postoperative pain or unexpected clinical signs. One-way ANOVA and Duncan's post hoc comparison, and Chi-square test were used for statistical analysis to evaluate any differences among tested materials. Results: The average number of visits for intracanal medication was 2.69, 2.65, and 2.61 for Calcipex II, TRC-paste, and Metapaste. There were no statistically differences in post-obturation pain among three groups obturated with different root canal sealers (P > 0.05). Conclusions: Under the limitations of this study, three tested intracanal medicaments and epoxy resin root canal sealers showed clinically acceptable similar results.

• Restorative Dentistry and Endodontics
• /
• 제48권3호
• /
• pp.28.1-28.13
• /
• 2023

Objectives: This study aimed to investigate the effect of the application method of 2% chlorhexidine (CHX) and its influence on the adhesion of fiberglass posts cemented with a self-adhesive resin cement. Materials and Methods: Sixty human mandibular premolars were endodontically treated and divided into 5 groups (n = 12), according to the canal irrigant and its application method: 2 groups with conventional syringe irrigation (CSI)-2.5% sodium hypochlorite (NaOCl) (control) and 2% CHX- and 3 groups with 2% CHX irrigation/activation-by passive ultrasonic irrigation (PUI), Easy Clean file, and XP-Endo Finisher file. Two roots per group were evaluated for smear layer (SL) removal by scanning electron microscopy. For other roots, fiber posts were luted using a self-adhesive resin cement. The roots were sectioned into 6 slices for push-out bond strength (BS) (7/group) and nanoleakage (NL) (3/group). Data from SL removal were submitted to Kruskal-Wallis and Student-Newman-Keuls tests (α = 0.05). Data from BS and NL were evaluated by 2-way analysis of variance and Tukey's test (α = 0.05). Results: For SL removal and BS, the CHX irrigation/activation promoted better values than CSI with CHX (p < 0.05), but it was not significantly different from CSI with NaOCl (p > 0.05). For NL, the lowest values were obtained by the chlorhexidine irrigation/activation groups (p < 0.05). Conclusions: Active 2% CHX irrigation can be used to improve the post space cleaning and adhesion before fiber post cementation with self-adhesive resin cements.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.150.1-150.1
• /
• 2014

Showerhead is used as a main part in the semiconductor equipment. The face plate flatness should remain constant and the cleaning performance must be gained to keep the uniformity level of etching or deposition in chemical vapor deposition process. High operating temperature or long period of thermal loading could lead the showerhead to be deformed thermally. In some case, the thermal deformation appears very sensitive to showerhead performance. This paper describes the methods for robust design using computational fluid dynamics. To reveal the influence of the post distribution on flow pattern in the showerhead cavity, numerical simulation was performed for several post distributions. The flow structure appears similar to an impinging flow near a centered baffle in showerhead cavity. We took the structure as an index to estimate diffusion path. A robust design to reduce the thermal deformation of showerhead can be achieved using post number increase without ill effect on flow. To prevent the showerhead deformation by heat loading, its face plate thickness was determined additionally using numerical simulation. The face plate has thousands of impinging holes. The design key is to keep pressure drop distribution on the showerhead face plate with the holes. This study reads the methodology to apply to a showerhead hole design. A Hagen-Poiseuille equation gives the pressure drop in a fluid flowing through such hole. The assumptions of the equation are the fluid is viscous-incompressible and the flow is laminar fully developed in a through hole. An equation can be expressed with radius R and length L related to the volume flow rate Q from the Hagen-Poiseuille equation, $Q={\pi}R4{\Delta}p/8{\mu}L$, where ${\mu}$ is the viscosity and ${\Delta}p$ is the pressure drop. In present case, each hole has steps at both the inlet and the outlet, and the fluid appears compressible. So we simplify the equation as $Q=C(R,L){\Delta}p$. A series of performance curves for a through hole with geometric parameters were obtained using two-dimensional numerical simulation. We obtained a relation between the hole diameter and hole length from the test cases to determine hole diameter at fixed hole length. A numerical simulation has been performed as a tool for enhancing showerhead robust design from flow structure. Geometric parameters for the design were post distribution and face plate thickness. The reinforced showerhead has been installed and its effective deposition profile is being shown in factory.

• 접착 및 계면
• /
• 제21권4호
• /
• pp.143-155
• /
• 2020

Sol-Gel 공정을 통해서 제조되는 유-무기 하이브리드 화합물들은 방청 코팅, 방빙 코팅(Anticing), 자가 세정 코팅, 반사 방지 코팅 등과 같은 기능성 코팅 재료로 널리 사용되어져 왔다. 특히 소수성 코팅 표면을 제조하기 위해서는 코팅표면의 표면에너지가 낮고 코팅 표면의 조도를 제어가 요구된다. 표면에너지와 표면 조도를 조절하는 전형적인 공정은 in-situ fabrication 공정, 'Pre-fluorinating/Post-roughening', 'Pre-roughening/ Post-fluorinating이다. 본 연구에서는 in-situ fabrication 공정인 Particle-Binder 공정을 이용해서 소수성 코팅표면을 제조하였다. 3관능기 유기실란화합물과 불소 함유 유기실란 화합물과의 가수분해 및 축합반응을 통해 제조된 불소함유 유-무기 하이브리드를 바인더로 사용하여서 무기물 나노입자와 혼합하여 소수성 코팅액을 제조하고 유리 기재 위에 스핀코팅 후 열건조하여서 코팅막을 제조하였다. 바인더인 유-무기 하이브리드 화합물의 불소 함유 실란화합물의 첨가량, 첨가순서, 무기물 나노입자 첨가량에 따른 코팅막의 물성 변화를 조사하였다. 분석결과 불소 함량이 10 wt%인 유-무기 하이브리드 화합물(GPTi-HF10)을 바인더로 사용하여서 제조된 코팅막이 가장 소수성이 우수하였으며 수접촉각은 (107.52 ± 1.6°), 이 바인더와 무기물 나노입자의 무게비가 1:3인 경우(GPTi-HF10-MS 3.0)에 가장 높은 수접촉각(130.84±1.99°)을 나타내었다.

• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.608-615
• /
• 2018

The purpose of this study is to investigate the dyeability and functional properties of dyed fabric with the extract of Myrica rubra rind. For this purpose, the ultraviolet and visible spectra of the bark extracts were investigated. The dyeing temperature, dyeing time, mordant type, mordanting order, mordant concentration and dyeability were investigated. The color fastness based on washing, dry-cleaning, rubbing and light were evaluated by the types of Myrica rubra rind extract used. In addition, the deodorization and antibacterial activity were measured, and the functionality of the silk fabric dyed with the extract of the Myrica rubra rind was evaluated. The result shows that the color strength of the dye was excellent when the Myrica rubra rind was dyed at $80^{\circ}C$ for 80 minutes. The mordant dye color strength was high in the order of Fe mordant> Cu mordant> Al mordant. The dyeability of Al and Cu mordant was high during pre-mordanting compared to Fe mordant, and the dyeability of Fe mordant was high during post-mordanting than Cu and Al mordant. The deodorant property of the dyed fabric stained with the Myrica rubra rind extract was 92.4% and that of antibacterial property was 99.9% for Staphylococcus aureus and Klebsiella pneumoniae bacteria respectively.

• 대한가정학회지
• /
• 제41권2호
• /
• pp.107-121
• /
• 2003

This study was discussed the dyeing of wool and nylon fabrics with Chinese Scholar Tree extract. The extracts of Chinese Scholar Tree was prepared in the condition of heating at $95{\pm}5C$, for 1 hour and cooling to 40C. And then the extracts of color matter treate with vacuum concentration at $60{\pm}2^{\circ}C$, 30mmHg and dried with spray dryer. The dyeing of wool and nylon fabric in this experiment was also employed the mordant dyeing method such as pre-mordant, post-mordant and simultaneous mordant method. The mordanting agents used in this study were as followings ; aluminium potassium sulfate, copper(II) acetate monohydrate, chromium potassium sulfate$.$$7H_2O$, Tin(II) chloride dihydrate, iron(II)sulfate $7H_2O$. For an evaluation of the dyeing property of the mordanting agents, the pre-mordant method, the repeat dyeing and the fastness of the light, dry cleaning, washing and rubbing measured respectively. From the results of the dye absorption, the optimum dyeing condition of the wool and nylon fabrics with Chinese Scholar Tree extract is at 80C dyeing temperature for 60 minutes. The optimum concentration of mordanting agent is Al, Cr, Sn 1%, Fe, Cu 2% solution. In general, the fastness property of the dyed wool and nylon fabrics had a comparatively high grade.

• Journal of Periodontal and Implant Science
• /
• 제38권4호
• /
• pp.737-744
• /
• 2008

Purpose: In advanced case of periodontitis, surgical treatment without bone contouring may result in residual pockets inaccessible to proper cleaning during post-treatment maintenance. This problem can be avoided or reduced by applying guided tissue regeneration. Materials and Methods: All of 3 patients had deep periodontal pocket depth and bleeding on probing, and radiograph revealed osseous defect, so we planned guided tissue regeneration using resorbable membrane with or without xenograft. Result: 6 months later, periodontal pocket depth and bleeding on probing was improved and gingiva was stable. Conclusion: Guided tissue regeneration using resorbable membrane with or without xenograft in osseous defect is predictable.

• 한국의류학회지
• /
• 제35권4호
• /
• pp.466-475
• /
• 2011

The dyeing properties of protein fiber with pine needles colorants were studied through an investigation of the effect of dyeing conditions such as dye concentration, dyeing temperatures and time on dye uptakes, effect of mordants, and color change. In addition, the various colorfastness of dyed silk and wool fabrics were evaluated for practical use. The antimicrobial ability, ultraviolet-cut ability, and deodorant ability were also estimated. The dye uptake increased as the dyeing concentration increased and this enabled the obtainment of the Langmuir absorption isotherm. The dye uptake increased as the dyeing time and temperature increased. Pine needles colorants showed relatively good affinity to protein fiber and produced a yellow color. Post-mordanting was more effective than the pre-mordanting, and the dye uptake of fabrics improved by mordanting. Except for washing, the colorfastness of dyed fabrics showed a low rating. However, the colorfastness to light and the dry cleaning of fabrics mordanted with N.Cu, and the friction fastness of fabrics mordanted with Cu improved. The guide fabrics showed very good antimicrobial abilities of 99.9%; in addition, the ultraviolet-cut ability and deodorant ability improved in fabrics dyed with pine needles extracts.