Journal of Adhesion and Interface (접착 및 계면)

The Society of Adhesion and Interface, Korea (한국접착및계면학회)
권호 표지
DOI QR코드

DOI QR Code

Preparation of Hydrophobic Coating Layers Using Organic-Inorganic Hybrid Compounds Through Particle-to-Binder Process

유-무기 하이브리드 화합물과 Particle-Binder 공정을 이용한 소수성 코팅막 제조

  • Hwang, Seung-Hee (Department of Advanced Materials Engineering, Kangwon National University) ;
  • Kim, Hyo-Won (Department of Advanced Materials Engineering, Kangwon National University) ;
  • Kim, Juyoung (Department of Advanced Materials Engineering, Kangwon National University)
  • 황승희 (강원대학교 기능소재공학과) ;
  • 김효원 (강원대학교 기능소재공학과) ;
  • 김주영 (강원대학교 기능소재공학과)
  • Received : 2020.12.04
  • Accepted : 2020.12.25
  • Published : 2020.12.31
Download PDF
⟨ Previous Next ⟩

Abstract

Hydrophobic Organic-Inorganic (O-I) hybrid materials prepared by sol-gel process have been widely used at functional coating fields such as coatings for anti-corrosion, anti-icing, self-cleaning, anti-reflection. The key point for fabricating hydrophobic surface is to optimize the surface energy and roughness of the coating films. There are typical processes to control the surface energy and roughness which are 'In situ fabricating', 'Pre-fluorinating/Post-roughening', 'Pre-roughening/ Post-fluorinating'. In this study, particle-binder process was used for in-situ fabrication of hydrophobic coating films. Various O-I hybrid compounds prepared using several kinds of alkoxysilane compounds were used as a binder for silica nanoparticles at particle-binder process. To study effect of fluorine content and weight ratio of particle : binder on the hydrophobicity and surface morphology, Hydrophobic coating films were prepared onto glass substrate at various content of fluorine content of O-I hybrid binder and weight ratio of particle : binder. The coating films prepared using O-I hybrid binder (GPTi-HF10) having 10 wt% of fluorine content showed the highes water contact angle (107.52±1.6°). The coating films prepared at 1:3 weight ratio of GPTi-HF10 : silica nanoparticle exhibited the highest water contact angle (130.84±1.99°).

Sol-Gel 공정을 통해서 제조되는 유-무기 하이브리드 화합물들은 방청 코팅, 방빙 코팅(Anticing), 자가 세정 코팅, 반사 방지 코팅 등과 같은 기능성 코팅 재료로 널리 사용되어져 왔다. 특히 소수성 코팅 표면을 제조하기 위해서는 코팅표면의 표면에너지가 낮고 코팅 표면의 조도를 제어가 요구된다. 표면에너지와 표면 조도를 조절하는 전형적인 공정은 in-situ fabrication 공정, 'Pre-fluorinating/Post-roughening', 'Pre-roughening/ Post-fluorinating이다. 본 연구에서는 in-situ fabrication 공정인 Particle-Binder 공정을 이용해서 소수성 코팅표면을 제조하였다. 3관능기 유기실란화합물과 불소 함유 유기실란 화합물과의 가수분해 및 축합반응을 통해 제조된 불소함유 유-무기 하이브리드를 바인더로 사용하여서 무기물 나노입자와 혼합하여 소수성 코팅액을 제조하고 유리 기재 위에 스핀코팅 후 열건조하여서 코팅막을 제조하였다. 바인더인 유-무기 하이브리드 화합물의 불소 함유 실란화합물의 첨가량, 첨가순서, 무기물 나노입자 첨가량에 따른 코팅막의 물성 변화를 조사하였다. 분석결과 불소 함량이 10 wt%인 유-무기 하이브리드 화합물(GPTi-HF10)을 바인더로 사용하여서 제조된 코팅막이 가장 소수성이 우수하였으며 수접촉각은 (107.52 ± 1.6°), 이 바인더와 무기물 나노입자의 무게비가 1:3인 경우(GPTi-HF10-MS 3.0)에 가장 높은 수접촉각(130.84±1.99°)을 나타내었다.

Keywords

References

  1. S. S. Latthe et al., Recent progress in preparation of superhydrophobic surfaces: A Review, Journal of Surface Engineered Materials and Advanced Technology, 2, 76-94 (2012). https://doi.org/10.4236/jsemat.2012.22014
  2. H. S. Lim, Development of nanostructured superhydrophobic surfaces, KIC News, 15, 11-22 (2012).
  3. J. Chen et al., Facile fabrication of antifogging, antireflective, and self-cleaning transparent silica thin coatings, Colloids and Surfaces A: Physicochem. Eng. Aspects, 509, 149-157 (2016). https://doi.org/10.1016/j.colsurfa.2016.08.037
  4. X. Zhao et al., Transparaent and durable superhydrophobic coatings for anti-bioadhesion, Journal of colloid and Interface Science, 501, 222-230 (2017). https://doi.org/10.1016/j.jcis.2017.04.049
  5. Z. Zhang et al., Mechanically durable, superhydrophobic coatings prepared by dual-layer method for anti-corrosion and self-cleaning, Colloids and Surfaces A: Physicochem. Eng. Aspects, 490, 182- 188 (2016). https://doi.org/10.1016/j.colsurfa.2015.11.049
  6. H. Wang et al., Corrosion-resistance, robust and wear-durable highly amphiphobic polymer based composite coating via a simple spraying approach, Progress in Organic Coatings, 82, 74-80 (2015). https://doi.org/10.1016/j.porgcoat.2015.01.012
  7. M. Qu et al., Fabrication of recyclable and durable superhydrophobic materials with wear/corrosion-resistance properties from kaolin and polyvinylchloride, Applied Surface Science, 410, 299-307 (2017). https://doi.org/10.1016/j.apsusc.2017.03.127
  8. C. Tao et al., Sol-gel based antireflective coatings with superhydrophobicity and exceptionally low refractive indices built from trimethylsilanized hollow silica nanoparticles, Colloids and Surfaces A: Physicochem. Eng. Aspects, 509, 307-313 (2016). https://doi.org/10.1016/j.colsurfa.2016.08.055
  9. C. Tao et al., Synthesis of shape controlled hollow silica nanostructures with a simple soft-templating method and their application as superhydrophobic antireflective coatings with ultralow refractive indices, Colloids and Surfaces A: Physicochem. Eng. Aspects, 501, 17-23 (2016). https://doi.org/10.1016/j.colsurfa.2016.04.051
  10. J. Liu et al., Super-Hydrophobic/Icephobic coatings based on silica nanoparticles modified by self-assembled monolayers, Nanomaterials, 6, 1-10 (2016). https://doi.org/10.3390/nano6010001
  11. Q. Shang et al., Fabrication of transparent superhydrophobic porous silica coating for self-cleaning and anti-fogging, Ceramics International, 42, 8706-8712 (2016). https://doi.org/10.1016/j.ceramint.2016.02.105
  12. A. Fuchs et al., Wetting and surface properties of (modified) fluoro-silanised glass, Colloids and Surfaces A: Physicochem. Eng. Aspects, 307, 7-15 (2007). https://doi.org/10.1016/j.colsurfa.2007.04.058
  13. T. Nishino et al., The lowest surface free energy based on -CF3 Alignment, Langmuir, 15(13), 4321-4323 (1999). https://doi.org/10.1021/la981727s
  14. B. Wang et al., Transparent superhydrophobic solar glass prepared by fabricating groove-shaped arrays on the surface, Applied Surface Science, 426, 957-964 (2017). https://doi.org/10.1016/j.apsusc.2017.07.169
  15. P. Pi et al., A facile one-step fabrication of robust superhydrophobic/superoleophilic cotton fabric using a crosslinkable POSS-containing fluorinated copolymer, Progress in Organic Coatings, 101, 522-529 (2016). https://doi.org/10.1016/j.porgcoat.2016.09.023
  16. I. Bernagozzi et al., Fabricating superhydrophobic aluminum: An optimized one-step wet synthesis using fluoroalkyl silane, Colloids and Surface A: Physicochem. Eng. Aspects, 441, 919-924 (2014). https://doi.org/10.1016/j.colsurfa.2013.05.042
  17. D. Kumar et al., Development of durable self-cleaning coatings using organic-inorganic hybrid sol-gel method, Applied Surface Science, 344, 205-212 (2015). https://doi.org/10.1016/j.apsusc.2015.03.105
  18. H. Zhao et al., Fabrication, surface properties, and origin of superoleophobicity for a model textured surface, Langmuir, 27(10), 5927-5935 (2011). https://doi.org/10.1021/la104872q
  19. Y. Zheng et al., Formation of SiO2/polytetrafluoroethylene hybrid superhydrophobic coating, Applied Surface Science, 258, 9859-9863 (2012). https://doi.org/10.1016/j.apsusc.2012.06.043
  20. B. Jones et al., Fluoropolymers for coating applications, JCT coatings Tech magazine, 1-10 (2018).
  21. S. Liu et al., Self-cleaning transparent superhydrophobic coatings through simple sol-gel processing of fluoroalkylsilane, Applied Surface Science, 351, 897-903 (2015). https://doi.org/10.1016/j.apsusc.2015.06.016
  22. H. Tian et al., Fabrication and characterization of superhydrophobic thin films based on TEOS/RF hybrid, Applied Surface Science, 255, 4289-4292 (2009). https://doi.org/10.1016/j.apsusc.2008.11.040
  23. Z. Chu et al., Superamphiphobic surfaces, Chemical Society Review, 43(8), 2784-2798 (2014). https://doi.org/10.1039/c3cs60415b
  24. D. Chandra et al., Connectivity of PS-b-PEO templated spherical pores in titanium oxide films, Physical Chemistry Physics, 13(27), 12529-12535 (2011). https://doi.org/10.1039/c1cp21060b
  25. Y. Liu et al., Synthesis of hydrophobic mesoporous silica films using poly(dimethylsiloxane)-poly(ethylene oxide) (PDMS-PEO) as co-template, Microporous and Mesoporous Materials, 145(1), 182-187 (2011). https://doi.org/10.1016/j.micromeso.2011.05.023
  26. I. O. Arukalam et al., Nanostructured superhydrophobic polysiloxane coating for high barrier and anticorrosion applications in marine environment, Journal of Colloid and Interface Science, 512, 674-685 (2018). https://doi.org/10.1016/j.jcis.2017.10.089
  27. S. Pan, Fabrication of superhydrophobic coating via spraying method and its applications in anti-icing and anti-corrosion, Applied Surface Science, 389, 547-553 (2016). https://doi.org/10.1016/j.apsusc.2016.07.138
  28. J. Ma et al., A facile spraying method for fabricating superhydrophobic leather coating, Colloids and Surface A: Physicochem. Eng. Aspects, 472, 21-25 (2015). https://doi.org/10.1016/j.colsurfa.2015.02.019
  29. Y. Zhao et al., Superhydrophobic and UV-blocking cotton fabrics prepared by layer-by-layer assembly of organic UV absorber intercalated layered double hydroxides, Applied Surface Science, 286, 364-370 (2013). https://doi.org/10.1016/j.apsusc.2013.09.092
  30. Q. Z. Huang et al., A novel strategy for durable superhydrophobic coating on glass substrate via using silica chains to fix silica particles, Chemical Physics Letters, 692, 33-37 (2018). https://doi.org/10.1016/j.cplett.2017.12.005
  31. C. Neinhuis et al., Characterization and distribution of water-repellent, self-cleaning plant surfaces, Annals of Botany, 79, 667-677 (1997). https://doi.org/10.1006/anbo.1997.0400
  32. R. N Wenzel, Resistance of solid surfaces to wetting by water, Industrial & Engineering Chemistry, 28(8), 998-994 (1936). https://doi.org/10.1021/ie50320a024
  33. A. B. D. Cassie and S. Baxter, Wettability of porous surfaces, Transactions of the faraday society, 40, 546-551 (1944). https://doi.org/10.1039/TF9444000546
  34. T. Young, An essay on the cohesion of fluids, Philosophical Transactions of the Royal Society B, 95, 65-87 (1805). https://doi.org/10.1098/rstl.1805.0005
  35. A. M. Coclite et al., Super-hydrophobic and oleophobic crystalline coatings by initiated chemical vapor deposition, Physics Procedia, 46, 56-61 (2013). https://doi.org/10.1016/j.phpro.2013.07.045
  36. P. Muthiah et al., Dual-layered-coated mechanically-durable superomniphobic surfaces with anti-smudge properties, Journal of Colloid and Interface Science, 409, 227-236 (2013). https://doi.org/10.1016/j.jcis.2013.07.032
  37. C. T. Hsieh, Influence of surface roughness on water- and oil-repellent surfaces coated with nanoparticles, Applied Surface Science, 240, 318-326 (2005). https://doi.org/10.1016/j.apsusc.2004.07.016
  38. 오영제, Sol-gel 반응공정의 원리, 평가 및 응용, Journal of the Korean Ceramic Society, 10(2), 141-151 (1995).
  39. C. Petcu et al., The influence of new hydrophobic silica nanoparticles on the surface properties of the films obtained from bilayer hybrids, Nanomaterials, 7, 1-10 (2017). https://doi.org/10.3390/nano7010001
  40. Y. S. Keum et al., Improvement of performance of anti-reflective coating film using methyltrimethoxysilane, Applied Chemistry Engineering, 26, 400-405 (2015). https://doi.org/10.14478/ace.2015.1031
  41. Q. Li et al., Synthesis of polymeric fluorinated sol-gel precursor for fabrication of superhydrophobic coating, Applied Surface Science, 367, 101-108 (2016). https://doi.org/10.1016/j.apsusc.2016.01.155
  42. A. A. E. Hadad et al., Preparation of sol-gel hybrid materials from γ-methacryloxypropyltrimethoxysilane and tetramethyl orthosilicate: study of the hydrolysis and condensation reactions, Colloid and polymer Science, 289(17-18), 1875-1883 (2011). https://doi.org/10.1007/s00396-011-2504-y
  43. C. C. Chang et al., Preparation of highly transparent 13F-modified nano-silica/polymer hydrophobic hard coatings on plastic substrates, Journal of Applied Science and Engineering, 18(4), 387-394 (2015).
  44. Z. B. Zhao et al., One-pot fabrication of fluoride-silica@silica raspberry-like nanoparticles for superhydrophobic coating, Ceramics International, 42, 14601-14608 (2016). https://doi.org/10.1016/j.ceramint.2016.06.076
  45. S. Liu et al., Raspberry-like superhydrophobic silica coatings with self-cleaning properties, Ceramics International, 41, 11719-11725 (2015). https://doi.org/10.1016/j.ceramint.2015.05.137
  46. H. Peng et al., Influence of fluorinated self-assembled monolayer on wetting dynamics during evaporation of refrigent-oil mixture on metal surface, International Journal of Refrigeration, 79, 76-88 (2017). https://doi.org/10.1016/j.ijrefrig.2017.04.005
  47. R. V. Lakshmi et al., Effect of the size of silica nanoparticles on wettability and surface chemistry of sol-gel superhydrophobic and oleophobic nanocomposite coatings, Applied Surface Science, 320, 780-786 (2014). https://doi.org/10.1016/j.apsusc.2014.09.150
  48. Y. C. Jung et al., Wetting transition of water droplets on superhydrophobic patterned surfaces, Scripta Materialia, 57, 1057-1060 (2007). https://doi.org/10.1016/j.scriptamat.2007.09.004
  49. B. Bhushan et al., Wetting study of patterned surfaces for superhydrophobicity, Ultramicroscopy, 107, 1033-1041 (2007). https://doi.org/10.1016/j.ultramic.2007.05.002