• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.07a
• /
• pp.235-238
• /
• 2004

본 연구는 반도체소자 제조공정에 적용되는 CMP공정 중 LPP(Landing Plug Poly) Contact간의 소자 분리를 위해 진행되는 LPP CMP의 후 세정 과정에서 유발되는 방사형 Defect 제거에 관한 내용이다. 방사형 Defect은 LPP CMP 후에 노출되는 BPSG, Poly, Nitride Film과 연마재로 사용되는SiO2 입자, 후 세정과정에서 적용되는 SC-1, DHF, $NH_4OH$ Chemical과 Brush와의 상호작용에 의해 발생되며, Cleaning시의 산성 분위기 하에서 각 물질간의 pH와 Zeta Potential의 차이에서 기인한다. 이 Defect을 제거하기 위해 LPP CMP후에 Film 표면에 노출되는 각 물질의 표면 특성과 CMP 후 오염입자의 흡착과 재 흡착에 영향을 미치는 Electrostatic force와 Van der Waals force, PVA Brush에 의한 Mechanical force의 상호작용을 고려하여 최적 후 세정 조건을 제시 하였다.

• Korean Journal of Health Education and Promotion
• /
• v.26 no.2
• /
• pp.25-33
• /
• 2009

Objectives: Smoking is related to periodontal disease and periodontal therapy. So the aim of this study was to investigate the effects of professional tooth cleaning and plaque control instruction (PT & PCI) for smoking behavior. Methods: A total of 151 adults were investigated using the O'Leary Plaque Index (PI), $L\ddot{o}e$ & Silness gingival index (GI) and the number of sextants possessing periodontal pocket (SPP). And adults were given a through dental scaling and Watanabe method for dental plaque control. Follow up examination were conducted after 3 months and compared the pre and post- status. The collected data were analyzed with t-test, paired t-test and one-way analysis of variance. Results: Regardless of smoking behavior, improving effects were identified after PT & PCI on PI, GI and SPP in the whole population. However, the effects of GI improvement were significant in the smoking group alone; those of PI improvement were most significant in the non-smoking group; and those of SPP improvement were more significant in non-smoking and pre-smoking groups than in the smoking group. The shorter period of smoking and the smaller amount of smoking, the greater effects of PT & PCI by smoking-related characteristics. Conclusion: Smoking cessation instruction should necessarily be included in oral health education in that smoking is an important factor to consider in prevention of periodontal diseases and periodontal therapies.

• Journal of the Korean Society of Costume
• /
• v.56 no.1 s.100
• /
• pp.143-149
• /
• 2006

For the purpose of standardization and practicability of natural dyeing, the mordanting and dyeing properties of Acorn Shell was studied. Appropriate extraction, dyeing and mordanting condition of Acorn Shell were determined, and the effect of mordanting method on dye uptake and color fastness of dyed fabric was investigated. The maximum absorbance of Acorn Shell solution was at 287.5nm and 294nm. The pH effect was stable in the color difference changes. The optimum temperature to extract Acorn Shell was during 1 hour in $60^{\circ}C$. The effective dyeing temperature and time of silk were $80{\sim}100^{\circ}C$, 1hour. The silk fabrics dyed with Acorn Shell appeared yellow-brown. K/S value of dyeing fabrics was increased by mordant treatment. K/S value of post-mordanting was higher than pre-mordanting. Mordanting treatment attected color change of the dyed silk. In the case of Acorn Shell light fastness of appeared more than 3-5grades by post-mordanting. Abrasion fastness of appeared more than 3-5grades. Perspiration fastness of appered more than $3{\sim}5grades$ by mordant treatment but Cu mordant treatment was $2-5{\sim}4grades$. Dry-cleaning Fastness appered more than 4 grades except Cu mordant treatment. These fastness improvement were generally effective for mordant treatment, specially Al, Sn, Cr.

• Textile Coloration and Finishing
• /
• v.20 no.6
• /
• pp.35-41
• /
• 2008

This study investigated the dyeing properties of silk fabrics with Annatto. The dye stuff was extracted by distilled water at $60^{\circ}C$, 10minutes, 1:100 of bath ratio. Dyeability(K/S) and color fastness of silk fabrics were tested under conditions of various concentrations, time, temperature, repeat-numbers of dyeing, pH, mordants variables and methods of mordanting. The highest absorbance was found in methanol extract of Annatto. The optimum dyeing concentration, time and temperature of silk fabrics with Annatto were 25%(o.w.f.), 60min and $60^{\circ}C$ respectively. The K/S value showed higher in post-mordanting than in pre-mordanting, and especially post-Fe mordant showed highest K/S value. In the case of colorfastness, Cu-mordanted fabrics were good washing fastness. Dry cleaning fastness appeared 4-5 grades and light fastness showed lowest grade.

• Journal of Environmental Science International
• /
• v.27 no.6
• /
• pp.457-466
• /
• 2018

The purpose of this study was to develop environmentally friendly black dye by comparing Ketapang and Gallnut, that have been traditionally used as a black dye. As a result of FT-IR and UV-Vis spectrophotometer analysis, Ketapang was characterized by condensed tannin, while Gallnut showed hydrolyzable tannin. Due to the dyeability characteristic analysis, the color fastness of the non-mordant dye was slightly lowered to grades 1-3. In the dry-cleaning fastness test, both non-mordant and iron mordant were excellent, in grade 4-5, and the daylight fastness was excellent grade 3-5 too. The $L^*$ values of Ketapang were 26.93 (pre-mordant) and 29.39 (post-mordant), which were higher than those of Gallnut, 41.90 (pre-mordant) and 43.02 (post-mordant), indicating that Ketapang was more easily colored as a black dye than Gallnut.

• Culinary science and hospitality research
• /
• v.12 no.3 s.30
• /
• pp.17-31
• /
• 2006

There have not been the best method for improving the management system of an enterprise. Its management system must be changed according to new environment. Therefore, the food service industry had to accept outsourcing strategies to reduce cost and construct the core-capability of enterprise. In this respect, we studied the introduction and the satisfaction in outsourcing strategies for family restaurants, including a post of enterprise, decision on the supply-enterprises, contract preparation, cost of outsourcing, recontract items and outsourcing result estimation. The results of this study were as follows; First, 90.5% of managers for 7 family restaurants felt that outsourcing is needed. Second, the post of the outsourcing for 7 family restaurants was from 1 to 8; supply for raw food material, cleaning and equipment repair. The introduction of outsourcing for 7 family restaurants started in 1995 and it had constantly made progress up to 2003. Thirdly, the advantages of the outsourcing for 7 family restaurants were increase of benefit, improvement of controllable-power for family restaurants and improvement of employees' satisfaction. Fourthly, 42.9% of managers were satisfied and 4.8% of them were not satisfied. 36 to 40 year old vice-managers were very satisfied with the result of the outsourcing. Fifth, 90.5% of family restaurant managers found the outsourcing to be needed and especially managers in their late thirties realized the outsourcing.

• Horticultural Science & Technology
• /
• v.31 no.4
• /
• pp.496-502
• /
• 2013

Grapes (Vitis vinifera) are one of the most important fruits worldwide and are eaten raw or after conversion to jelly, jam, juice and wine. Grape skins are a major source of resveratrol (3,5,4'-trihydroxystilbene), which has the ability to reduce blood sugar as well as anticancer, anti-inflammatory, and other beneficial cardiovascular effects. In this study, we investigated the increased accumulation of resveratrol in grape skin and leaves following ultrasonication treatment, which has been shown to induce resveratrol accumulation in several plants. Various ultrasonication treatment times and incubation periods were employed to identify the optimum conditions for the maximum accumulation of resveratrol. Treatment and further incubation led to increased resveratrol in both grape skins and leaves, with the highest increases of 7.7-fold and 1.9-fold occurring in response to 5 min ultrasonication treatment followed by 6 hour incubation and 15 min ultrasonication treatment followed by 3 hour incubation, respectively. The underlying mechanism for the increased amounts of resveratrol were studied by employing a semi-quantitative RT-PCR to monitor the expression levels of the resveratrol synthase (RS) gene in response to ultrasonication treatment. The RS gene increased the expression in response to ultrasonication treatment, suggesting that up-regulation of the RS gene by ultrasonication treatment triggers increased amounts of resveratrol. Taken together, these data indicate that this simple ultrasonication treatment of grapes can be an efficient post-harvest technology for increasing resveratrol in grape skins in addition to cleaning the fruits.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3293-3298
• /
• 2022

Removing radioactive contaminated metal materials is a vital task during the decommissioning of nuclear power plants to reduce the cost of the post-dismantling process. The laser decontamination technique has been recognized as a key tool for a successful dismantling process as it enables a remote operation in radioactive facilities. It also minimizes exposure of workers to hazardous materials and reduces secondary waste, increasing the environmental friendless of the post-dismantling processing. In this work, we present a thorough and efficient laser decontamination approach using a single-mode continuous-wave (CW) laser. We subjected stainless steels to a surface-removal process that repetitively exposes the laser to a confined region of ~75 ㎛ at a high scanning rate of 10 m/s. We evaluate the decontamination performance by measuring the removal depth with a 3D scanning microscope and further investigate optimal removal conditions given practical parameters such as the laser power and scan properties. We successfully removed the metal surface to a depth of more than 40 ㎛ with laser power of 300 W and ten scans, showing the potential to achieve an extremely high DF more than 1000 by simply increasing the number of scans and the laser power for the decontamination of primary circuits.

• Membrane and Water Treatment
• /
• v.13 no.4
• /
• pp.191-199
• /
• 2022

In industrial production, the development of traditional polyamide nanofiltration (NF) membrane was limited due to its poor oxidation resistance, complex preparation process and high cost. In this study, a composite NF membrane with high flux, high separation performance, high oxidation resistance and simple process preparation was prepared by the method of dilute solution dip coating. And the sulfonated polysulfone was used for dip coating. The results indicated that the concentration of glycerin, the pore size of the based membrane, the composition of the coating solution, and the post-treatment process had important effects on the structure and performance of the composite NF membrane. The composite NF membrane prepared without glycerol protecting based membrane had a low flux, when the concentration of glycerin increased from 5% to 15%, the pure water flux of the composite NF membrane increased from 46.4 LMH to 108.2 LMH, and the salt rejection rate did not change much. By optimizing the coating system, the rejection rate of Na₂SO₄ and PEG1000 was higher than 90%, the pure water flux was higher than 40 LMH (60psi), and it can withstand 20,000 ppm.h NaClO solution cleaning. When the post treatment processes was adjusted, the salt rejection rate of NaCl solution (250 ppm) reached 45.5%, and the flux reached 62.2 LMH.

• Korean Journal of Dental Materials
• /
• v.44 no.1
• /
• pp.61-68
• /
• 2017

This study evaluated the effects of various cleaning methods on the shear bond strength of zirconia ceramics after saliva contamination. Eighty zirconia disk specimens were divided into 8 groups. All groups were treated with one coat of MDP primer. All specimens (except the negative control) were contaminated with human saliva on the zirconia surface. The positive control went through the bonding procedure immediately after contamination without any cleaning procedure. With the exception of control groups, the remaining six groups were rinsed with water and either applied with MDP recoating (WATER+MDP) or without MDP recoating (WATER). While some were cleaned with a Ivoclean with MDP recoating (IVOCLEAN+MDP) or not applied with MDP recoating(IVOCLEAN), others were cleaned with a 1% NaOCl solution with MDP recoating (NaOCl+MDP) or without MDP recoating (NaOCl). The shear bond strength of all specimens were measured after being stored in distilled water at $37^{\circ}C$ for 24 hours. The data was analyzed statistically by an analysis of ANOVA, Tukey's post hoc test and Student's t-test was used to compare the shear bond strength according to the re-coating of MDP after the cleaning procedure. The positive control group showed the lowest shear bond strength value, and the WATER group and NaOCl group showed no significant difference when compared to the positive control group. The IVOCLEAN group showed significantly higher shear bond strength when compared to Water group and NaOCl group but not with the group of negative control. After rinsing with water or the NaOCl solution, the comparison of the single coating of MDP and re-coating of MDP showed different shear bond strengths but there was no significant difference to the negative control. After rinsing with Ivoclean, there was no significant difference to the negative control regardless of the recoating of MDP. In conclusion, the shear bond strength was affected by the cleansing procedure and Ivoclean was found to be effective regardless of the re-coating of MDP. When water or the NaOCl solution is used to remove surface contaminants, the re-coating of MDP provides a positive effect on cementation.