• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.139-140
• /
• 2006

PZT박막은 비휘발성 재료로 유전율이 높고 항전력이 작으면서 잔류 분극랑이 크기 때문에 적합한 특성을 가지고 FeRAM에 매력적인 물질이다. CMP(chemical mechanical polishing)는 기존의 회생막의 전면 식각 공정과는 달리 특정 부위의 제거 속도를 조절함으로써 평탄화 하는 기술로 wafer 전면을 회전하는 탄성 패드 사이에 액상의 Slurry를 투입하여 연마하는 기술이다. 본 논문에서는 CMP 공정으로 제조한 PZT박막 캐패시터에서 CMP 후처리공정(세척)의 유무 및 종류에 따라 피로특성에 대하여 연구하였다, PZT 박막의 캐패시터의 피로 특성을 연구한 결과 CMP 후처리공정 SC-l용액을 사용하여 세정공정을 하였을때 가장 향상된 PZT 캐패시터의 피로특성이 나타났다.

• 패션비즈니스
• /
• 제16권4호
• /
• pp.100-106
• /
• 2012

This research was carried out to find the mordant effect of Chestnut's inner skin on the cow leather dyed by Turmeric powder. The best proper mordanting conditions were examined by changing mordant method, concentration, temperature, bath ratio, time, and repetition. Also dyeability and surface color changes were evaluated by various mordanting methods. The optimum mordanting conditions of chestnut's inner skin extract on the cow leather were pre mordant, 80%, $50^{\circ}C$, 50:1, 40minutes, 4 repetition. The K/S values as a mordant were higher in pre mordant than post mordanting condition. Although the ${\Delta}E$ was slightly higher in post mordant than pre mordant, it was too small to find any means. The surface colors of all dyed cow leathers were yellow. Among light, dry cleaning, and abrasion fastnesses, only light fastness was increased one degree, others were same degrees.

• 대한청각학회지
• /
• 제23권1호
• /
• pp.15-19
• /
• 2019

Background and Objectives: To determine the efficacy of filling the external auditory meatus with 1% clotrimazole at a single visit for the treatment of otomycosis. Subjects and Methods: This prospective study included 40 patients who were referred to our clinic with complaints of ear itching, pain, and fullness, and were diagnosed with unilateral otomycosis. After cleaning the mycotic hyphae from the external auditory meatus, the ear canal was filled with 1% clotrimazole, using an intravenous catheter and syringe. The patients received follow-up examinations on post-treatment days 7, 15, and 45. Results: The follow-up otomicroscopic examinations revealed that 95% of the ear canals were entirely clean and that all symptoms had resolved. The post-treatment scores of pain, aural fullness and itching were significantly lower than the pre-treatment scores (p<0.01). Conclusions: Filling the external auditory meatus with 1% clotrimazole at a single visit is an easy, efficient, and cost-effective treatment for otomycosis. Additionally, high patient compliance makes this treatment superior to long-term topical therapy.

• Journal of Audiology & Otology
• /
• 제23권1호
• /
• pp.15-19
• /
• 2019

Background and Objectives: To determine the efficacy of filling the external auditory meatus with 1% clotrimazole at a single visit for the treatment of otomycosis. Subjects and Methods: This prospective study included 40 patients who were referred to our clinic with complaints of ear itching, pain, and fullness, and were diagnosed with unilateral otomycosis. After cleaning the mycotic hyphae from the external auditory meatus, the ear canal was filled with 1% clotrimazole, using an intravenous catheter and syringe. The patients received follow-up examinations on post-treatment days 7, 15, and 45. Results: The follow-up otomicroscopic examinations revealed that 95% of the ear canals were entirely clean and that all symptoms had resolved. The post-treatment scores of pain, aural fullness and itching were significantly lower than the pre-treatment scores (p<0.01). Conclusions: Filling the external auditory meatus with 1% clotrimazole at a single visit is an easy, efficient, and cost-effective treatment for otomycosis. Additionally, high patient compliance makes this treatment superior to long-term topical therapy.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.539-546
• /
• 1996

The physical condition of rapeseed delivered to fat industry plants plays a significant role in the formation of the qualitative features of the raw material for oil production and, consequently , of the oil itself. Rapeseed is stored in silos , frequently for months, before it is subjected to processing. During the long storage, the conditions of the seed cover is very important, as the seed cover provides natural protection of the seed against the effect of the environment. Seeds with damaged seed cover are more easily affected by mildew, and the rate of chemical processes. Deteriorating the quality of oil contained in the cotyledons is faster in such seeds. Cracked seed covers facilitates also the growth and development of microorgaism. So as rapeseed damage occurring inthe course of harvest and the post-harvest processing have a negative effect of the quality and quantity of oil the sees contain. The study presented here was aimed at examining the typical process of purcha ing and handling of rapeseed in fat industry plants, in the aspect of the occurrence of mechanical damage to the seeds. Special attention was paid to the condition of rapeseed immediately after combine harvesting : next , the successive stages of technological handling of the seed were examined. observing the operation parameters of the particular machinery and equipment in order to identify those operations which caused deterioration in the quality of the material (sees). Seed samples were taken successively from the following the hopper, prior to cleaning , after cleaning , prior to drying , after drying, from dry rape silo. The total level of damage increased through the handling. The content of unusable contaminants had the tendency to decrease in the successive operations. though the actual values still exceeded levels permitted by standards. The study allow to indicate the operation fo postharvest technological process, which cause the most seed damage as well as gave quantita ive description of the losses occurred.

• 한국작물학회지
• /
• 제47권6호
• /
• pp.475-478
• /
• 2002

보리의 산물처리 확대를 위한 기초자료를 제공하고자 미곡종합처리장을 이용한 보리 산물처리시 품질변화와 생력효과를 조사 분석한 결과는 다음과 같았다. 1. 정립율은 2.5-2.2mm의 비율이 가장 많았으며, 건조방식에 따른 차이는 없었다. 2. 경도는 건조방식에 따른 차이는 없었고, 색도는 산물건조와 관행인 천일건조와 차이는 없었다. 3. 흡수율은, 고형용출물, 퍼짐성 등의 취반특성은 건조방식에 따른 차이는 없었다. 4. 산물처리에 의하여 관행의 ha당 46시간에 비하여 21시간으로 54.3%의 생력효과가 있었고, 수확 후 관리는 54.3% 생력화되었다. 5. 산물처리로 수확 후 관리노력이 관행에 비하여 ha당 25시간이 절감되어 101,83원의 경영비 절감효과가 있었다.

• Environmental Engineering Research
• /
• 제22권4호
• /
• pp.377-383
• /
• 2017

A tube-type ceramic membrane for microfiltration was developed, and the membrane module comprised of three membranes was also applied to biological carbon and nitrogen removal processes for post-treatment. Manufacturing the microfiltration membrane was successful with the structure and boundary of the coated and support layers within the membrane module clearly observable. Total kjeldahl nitrogen removal from effluent was additionally achieved through the elimination of solids containing organic nitrogen by use of the ceramic membrane module. Removal of suspended solids and colloidal substances were noticeably improved after membrane filtration, and the filtration function of the ceramic membrane could also easily be recovered by physical cleaning. By using the ceramic membrane module, the system showed average removals of organics, nitrogen, and solids up to 98%, 80% and 99.9%, respectively. Thus, this microfiltration system appears to be an alternative and flexible option for existing biological nutrient removal processes suffering from poor settling performance due to the use of a clarifier.

• 복식
• /
• 제27권
• /
• pp.121-132
• /
• 1996

This study showed the proper pigment extract in the Phe. Dyeing which is the basic dye of the natural plants dyeing,. Also it compared and examined the K/S the promotion of the color fastness and the effect of color difference change were attended by mordants and method of mordanting. 1. The most absorbance of Phellodendron. sol-ution is 330nm berberine is 430nm. 2. The best and proper temperature to extrat Phe,. was 80 and dyeing solution for 24 hours. 3. The pH effect was stable in the absorbances and color differences change. 4. Mordanted group increased the absorbances compared to non-mordanted sample. In case depth the most absorbance of Al. Sn. K. Cu and C. A solution were in 3% Fe and Cr were in 5%. In the color difference change they became dark reduced greenish and increased yellowish when their absorbances were in 3% 5. K./S was recoginzed by tainnin and fe, K/S was more increased pre-mordants than post-mordants. 6. Fe is the unchangable mordant in the color difference change and pre-mordants is more stable than post-mordants in the difference color. 7. Generally light C. F indicated more than grade 2 and light C. F, was much improved in post-mordanted by alumium potassium potass-ium dichromate. Washing C.F was improved in mordanted by tainnin and ferrous suulfate mordanted group was better than non-mordanted sample. Perspir-ation C,F was more stable in acid than alkali. Dry cleaning C.F indicated more than grade. 4.

• 한국작물학회지
• /
• 제47권3호
• /
• pp.250-253
• /
• 2002

미곡종합처리장을 이용한 보리 산물수매 체계를 조사 분석하여 보리의 산물수매를 확대를 위한 기초자료를 제공하고자 실시하였다. 1.보리의 입고는 오전 10시부터 시작되었고, 오후 3시 이후에는 전체 산물 수매량의 61.1%가 입고되었다. 입고된 보리의 일별 평균 수분함량은 15.8-29.6%범위이었고, 건조기에 투입된 보리의 날짜별, 농가별, 필지별 수분함량의 변이가 켰다. 2. 건조 시간은 투입되는 보리의 수분함량에 따라 차이가 많았으며, 평균 건조시간은 9.5시간, 평균 건감율은 0.89% 이었다. 수분함량이 너무 높으면 건조시간이 많이 소요되고 투입구나 저류부의 탱크를 막는 고장의 원인이 되고, 품질이 떨어지므로, 후작물 재배에 지장이 없는 한 늦게 수확하는 것이 좋을 것으로 생각되었다. 3. 입고 보리에 함유된 이물질량은 보리의 수분함량 19.7-30%범위에서는 0.3-l.2%로 별 차이가 없었으나, 수분함량이 30%이상이 되면 급격히 증가하여 수분함량 38.9%에서는 이물질의 양이 5.9%로 많아졌다. 이물질 함량을 낮추기 위하여 분리능력이 좋은 조선기로 교체가 필요하였다. 4. 건조비용은 14% 종자수분 함량 환산 중량 기준으로 24% 이상은 50원, 17%이하는 30원이었다. 저장은 실내 사각빔과 폴리 콘 백에 담아 평상창고에 보관하였다. 저장 중 품질 저하를 막기 위하여 실내 또는 실외 저장사일로의 증설이 필요하였다.

• 한국표면공학회지
• /
• 제31권2호
• /
• pp.117-126
• /
• 1998

In this study, the residue remaining on the silicon wafer during the oxide overetching using $C_4F_8/H_2$ helicon were plasmas and effects of various cleaning and annealing methods on the removal of the remaining residue were investigated. The addition of 30%$H_2$ to the C4F8 plasma increased the C/F ratio and the thickness of the residue on the etched silicon surface. Most of the residuse on the etched surfaces colud be removed by the oxygen plasmsa cleaning followed by thermal annealing over $450^{\circ}C$. Hydrogen-coataining residue formed on the silicon by 70%$C_4F_8/30%H_2$ helicon plasmas was more easily removed than hydrogen-free residue formed residue formed by $C_4F_8$ helicon wear plasmas. However, damage remaining on the silicon surface overetched using 70%$C_4F_8/30%H_2$ helicon plasmas was intensive and the degree of reocvery duing the post-annealing was lower.