• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.139-140
• /
• 2006

PZT박막은 비휘발성 재료로 유전율이 높고 항전력이 작으면서 잔류 분극랑이 크기 때문에 적합한 특성을 가지고 FeRAM에 매력적인 물질이다. CMP(chemical mechanical polishing)는 기존의 회생막의 전면 식각 공정과는 달리 특정 부위의 제거 속도를 조절함으로써 평탄화 하는 기술로 wafer 전면을 회전하는 탄성 패드 사이에 액상의 Slurry를 투입하여 연마하는 기술이다. 본 논문에서는 CMP 공정으로 제조한 PZT박막 캐패시터에서 CMP 후처리공정(세척)의 유무 및 종류에 따라 피로특성에 대하여 연구하였다, PZT 박막의 캐패시터의 피로 특성을 연구한 결과 CMP 후처리공정 SC-l용액을 사용하여 세정공정을 하였을때 가장 향상된 PZT 캐패시터의 피로특성이 나타났다.

• Journal of Fashion Business
• /
• v.16 no.4
• /
• pp.100-106
• /
• 2012

This research was carried out to find the mordant effect of Chestnut's inner skin on the cow leather dyed by Turmeric powder. The best proper mordanting conditions were examined by changing mordant method, concentration, temperature, bath ratio, time, and repetition. Also dyeability and surface color changes were evaluated by various mordanting methods. The optimum mordanting conditions of chestnut's inner skin extract on the cow leather were pre mordant, 80%, $50^{\circ}C$, 50:1, 40minutes, 4 repetition. The K/S values as a mordant were higher in pre mordant than post mordanting condition. Although the ${\Delta}E$ was slightly higher in post mordant than pre mordant, it was too small to find any means. The surface colors of all dyed cow leathers were yellow. Among light, dry cleaning, and abrasion fastnesses, only light fastness was increased one degree, others were same degrees.

• Korean Journal of Audiology
• /
• v.23 no.1
• /
• pp.15-19
• /
• 2019

Background and Objectives: To determine the efficacy of filling the external auditory meatus with 1% clotrimazole at a single visit for the treatment of otomycosis. Subjects and Methods: This prospective study included 40 patients who were referred to our clinic with complaints of ear itching, pain, and fullness, and were diagnosed with unilateral otomycosis. After cleaning the mycotic hyphae from the external auditory meatus, the ear canal was filled with 1% clotrimazole, using an intravenous catheter and syringe. The patients received follow-up examinations on post-treatment days 7, 15, and 45. Results: The follow-up otomicroscopic examinations revealed that 95% of the ear canals were entirely clean and that all symptoms had resolved. The post-treatment scores of pain, aural fullness and itching were significantly lower than the pre-treatment scores (p<0.01). Conclusions: Filling the external auditory meatus with 1% clotrimazole at a single visit is an easy, efficient, and cost-effective treatment for otomycosis. Additionally, high patient compliance makes this treatment superior to long-term topical therapy.

• Journal of Audiology & Otology
• /
• v.23 no.1
• /
• pp.15-19
• /
• 2019

Background and Objectives: To determine the efficacy of filling the external auditory meatus with 1% clotrimazole at a single visit for the treatment of otomycosis. Subjects and Methods: This prospective study included 40 patients who were referred to our clinic with complaints of ear itching, pain, and fullness, and were diagnosed with unilateral otomycosis. After cleaning the mycotic hyphae from the external auditory meatus, the ear canal was filled with 1% clotrimazole, using an intravenous catheter and syringe. The patients received follow-up examinations on post-treatment days 7, 15, and 45. Results: The follow-up otomicroscopic examinations revealed that 95% of the ear canals were entirely clean and that all symptoms had resolved. The post-treatment scores of pain, aural fullness and itching were significantly lower than the pre-treatment scores (p<0.01). Conclusions: Filling the external auditory meatus with 1% clotrimazole at a single visit is an easy, efficient, and cost-effective treatment for otomycosis. Additionally, high patient compliance makes this treatment superior to long-term topical therapy.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1996.06c
• /
• pp.539-546
• /
• 1996

The physical condition of rapeseed delivered to fat industry plants plays a significant role in the formation of the qualitative features of the raw material for oil production and, consequently , of the oil itself. Rapeseed is stored in silos , frequently for months, before it is subjected to processing. During the long storage, the conditions of the seed cover is very important, as the seed cover provides natural protection of the seed against the effect of the environment. Seeds with damaged seed cover are more easily affected by mildew, and the rate of chemical processes. Deteriorating the quality of oil contained in the cotyledons is faster in such seeds. Cracked seed covers facilitates also the growth and development of microorgaism. So as rapeseed damage occurring inthe course of harvest and the post-harvest processing have a negative effect of the quality and quantity of oil the sees contain. The study presented here was aimed at examining the typical process of purcha ing and handling of rapeseed in fat industry plants, in the aspect of the occurrence of mechanical damage to the seeds. Special attention was paid to the condition of rapeseed immediately after combine harvesting : next , the successive stages of technological handling of the seed were examined. observing the operation parameters of the particular machinery and equipment in order to identify those operations which caused deterioration in the quality of the material (sees). Seed samples were taken successively from the following the hopper, prior to cleaning , after cleaning , prior to drying , after drying, from dry rape silo. The total level of damage increased through the handling. The content of unusable contaminants had the tendency to decrease in the successive operations. though the actual values still exceeded levels permitted by standards. The study allow to indicate the operation fo postharvest technological process, which cause the most seed damage as well as gave quantita ive description of the losses occurred.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.475-478
• /
• 2002

Post-harvest treatment for barley production requires many steps including drying, cleaning, and packing, and these steps be needed many labor input. Rice processing complex (RPC) is useful for post harvest management system in rice production. However, it is rare to be used for barley production. This study was conducted to explore the variations of quality and labor saving between conventional method and bulk-management system in post-harvest using RPC. The sorting rate was not different between manual method and bulk management. The hardness of non-polished grain was ranged 10,175-10,329 g/$3.14mm^2$, and that for non-polished grain was higher than that for polished grain, but there was not different between drying method. There was not be showed the hunter's value such as L, a and b according to drying method. Cooking characters such as water absorption ratio, swelling ratio, and water soluble extracts by circulated or continued dryer was higher than manual drying using solar heat. Labor input per ha for each cultivation process in bulk-management of barley using rice processing complex was 21 hours, compared to 46 hr/ha in the conventional method, labor input was greatly saved by up to 54.3% in the post-harvest bulk management system.

• Environmental Engineering Research
• /
• v.22 no.4
• /
• pp.377-383
• /
• 2017

A tube-type ceramic membrane for microfiltration was developed, and the membrane module comprised of three membranes was also applied to biological carbon and nitrogen removal processes for post-treatment. Manufacturing the microfiltration membrane was successful with the structure and boundary of the coated and support layers within the membrane module clearly observable. Total kjeldahl nitrogen removal from effluent was additionally achieved through the elimination of solids containing organic nitrogen by use of the ceramic membrane module. Removal of suspended solids and colloidal substances were noticeably improved after membrane filtration, and the filtration function of the ceramic membrane could also easily be recovered by physical cleaning. By using the ceramic membrane module, the system showed average removals of organics, nitrogen, and solids up to 98%, 80% and 99.9%, respectively. Thus, this microfiltration system appears to be an alternative and flexible option for existing biological nutrient removal processes suffering from poor settling performance due to the use of a clarifier.

• Journal of the Korean Society of Costume
• /
• v.27
• /
• pp.121-132
• /
• 1996

This study showed the proper pigment extract in the Phe. Dyeing which is the basic dye of the natural plants dyeing,. Also it compared and examined the K/S the promotion of the color fastness and the effect of color difference change were attended by mordants and method of mordanting. 1. The most absorbance of Phellodendron. sol-ution is 330nm berberine is 430nm. 2. The best and proper temperature to extrat Phe,. was 80 and dyeing solution for 24 hours. 3. The pH effect was stable in the absorbances and color differences change. 4. Mordanted group increased the absorbances compared to non-mordanted sample. In case depth the most absorbance of Al. Sn. K. Cu and C. A solution were in 3% Fe and Cr were in 5%. In the color difference change they became dark reduced greenish and increased yellowish when their absorbances were in 3% 5. K./S was recoginzed by tainnin and fe, K/S was more increased pre-mordants than post-mordants. 6. Fe is the unchangable mordant in the color difference change and pre-mordants is more stable than post-mordants in the difference color. 7. Generally light C. F indicated more than grade 2 and light C. F, was much improved in post-mordanted by alumium potassium potass-ium dichromate. Washing C.F was improved in mordanted by tainnin and ferrous suulfate mordanted group was better than non-mordanted sample. Perspir-ation C,F was more stable in acid than alkali. Dry cleaning C.F indicated more than grade. 4.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.250-253
• /
• 2002

The post harvest treatment of barley had many hard work steps, such as drying, cleaning, and packing. This is a reason why farmer doesn't like to cultivate barley. This study was conducted to investigate the optimum post harvest management of bulk-harvested barley using rice processing complex (RPC). Bulk-harvested barley was stored to 61.1% after 6pm at RPC. Grain moisture contents of bulk-harvested barley differed from storing date, farmer household, and field. Required dry hours were different with grain moistures contents. The average dry hour was 9.5 hours per 10a and dry rate was 0.89%. The proportion of impurity removed by coarse cleaning differed from grain moisture contents, as higher grain moisture content made impurity rate increase up to 38.9%. Cost of drying of bulk-harvested barley was 50won per ㎏ at above 24% of grain moisture contents, and the average dry cost was 41.25 won/㎏ and 14,400won/10a. The 62% of barley treated was stored in indoor-grain bin, and the others packed in 500 ㎏-poly con bag were stored in warehouse insulated.

• Journal of the Korean institute of surface engineering
• /
• v.31 no.2
• /
• pp.117-126
• /
• 1998

In this study, the residue remaining on the silicon wafer during the oxide overetching using $C_4F_8/H_2$ helicon were plasmas and effects of various cleaning and annealing methods on the removal of the remaining residue were investigated. The addition of 30%$H_2$ to the C4F8 plasma increased the C/F ratio and the thickness of the residue on the etched silicon surface. Most of the residuse on the etched surfaces colud be removed by the oxygen plasmsa cleaning followed by thermal annealing over $450^{\circ}C$. Hydrogen-coataining residue formed on the silicon by 70%$C_4F_8/30%H_2$ helicon plasmas was more easily removed than hydrogen-free residue formed residue formed by $C_4F_8$ helicon wear plasmas. However, damage remaining on the silicon surface overetched using 70%$C_4F_8/30%H_2$ helicon plasmas was intensive and the degree of reocvery duing the post-annealing was lower.