• Smart Structures and Systems
• /
• 제4권1호
• /
• pp.19-34
• /
• 2008

Nowadays developments in the field of laminated composite structures with piezoelectric have attracted significant attention of researchers due to their wide range of applications in engineering such as sensors, actuators, vibration suppression, shape control, noise attenuation and precision positioning. Due to large number of parameters associated with its manufacturing and fabrication, composite structures with piezoelectric display a considerable amount of uncertainty in their material properties. The present work investigates the effect of the uncertainty on the free vibration response of piezoelectric laminated composite plate. The lamina material properties have been modeled as independent random variables for accurate prediction of the system behavior. System equations have been derived using higher order shear deformation theory. A finite element method in conjunction with Monte Carlo simulation is employed to obtain the secondorder statistics of the natural frequencies. Typical results are presented for all edges simply supported piezoelectric laminated composite plates to show the influence of scattering in material properties on the second order statistics of the natural frequencies. The results have been compared with those available in literature.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2007년도 추계 종합학술대회 논문집
• /
• pp.30-34
• /
• 2007

레이저는 단시간에 높은 정밀도로 다량의 측정을 행할 수 있는 장점을 지니며, 이의 구체적인 실현이 지상 LiDAR라고도 불리는 지상레이저 스캐너이다. 본 논문에서는 Z-F 레이저시스템을 사용하여 대상물의 3차원 레이저 측정, Point 데이터의 생성, Registration & Merging, Polygon 데이터의 생성, Surface 데이터 생성의 과정을 거쳐 수행된 고건축물의 3차원 모델링 결과에 대하여 기술한다. 문화재의 보존 및 복원을 위한 자료 기록 및 측정에 있어서 지상 레이저스캐너를 사용한 고건축물의 데이터베이스 구축기술은 문화유산의 복원 및 관련분야에 커다란 영향력으로 자리매김할 수 있을 것으로 사료된다.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.471-480
• /
• 2018

Accurate target coordinate is very important in military operations especially field artillery's ground-to-ground attack and air-force's air-to-ground attack. DOS(or TAS) is used to acquire target coordinates from long distance. DOS is comprised of LRF and goniometer. LRF measures distance between DOS and target. Goniometer is comprised of azimuth and vertical angular sensors, DMC and internal GPS receiver. DOS must set the position and orientation(finding grid north) before measurement step(target coordinate acquisition). To improve accuracy of target coordinate, VRS RTK and reference point method are proposed in DOS setup step. VRS RTK provides accurate location coordinate with small deviations, providing high accuracy and precision in positioning and orientation. As a result, horizontal coordinate(easting and northing) accuracy is improved from 2.68 mil(C.L. = 0.95) mil to 0.58 mil(C.L. = 0.95).

• 한국통신학회논문지
• /
• 제31권5A호
• /
• pp.526-536
• /
• 2006

유비쿼터스 시대가 도래함에 따라 사회적으로 실내 위치 추적 시스템에 대한 관심이 증가되었다. 하지만 기존 실내 위치 추적 시스템은 실내 환경의 빈번한 변화에 능동적으로 대응하지 못하고, 실내 환경의 NLOS 특성으로 인하여 이동 객체의 정확한 위치 측정이 어려운 문제점이 있다. 본 연구의 목적은 앞으로 유비쿼터스 시대가 도래함에 따라 다양한 사용자의 요구를 만족시키기 위한 서비스를 제공하는데 필수 요소인 실내 이동 객체의 위치를 효과적으로 파악하고, 이동 객체의 위치 정확도를 향상시킨 환경 적응형 위치 추적 시스템을 제안한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2006년도 Proceedings of ISRS 2006 PORSEC Volume II
• /
• pp.684-687
• /
• 2006

Airborne imagery must be precisely orthorectified to be used as geographical information data. GPS/INS (Global Positioning System/Inertial Navigation System) and LIDAR (LIght Detection And Ranging) data were employed to automatically orthorectify airborne images. In this study, 154 frame airborne images and LIDAR vector data were acquired. LIDAR vector data were converted to raster image for employing as reference data. To derive images with constant brightness, flat field correction was applied to the whole images. The airborne images were geometrically corrected by calculating internal orientation and external orientation using GPS/INS data and then orthorectified using LIDAR digital elevation model image. The precision of orthorectified images was validated using 50 ground control points collected in arbitrary selected five images and LIDAR intensity image. In validation results, RMSE (Root Mean Square Error) was 0.365 smaller then two times of pixel spatial resolution at the surface. It is possible that the derived mosaicked airborne image by this automatic orthorectification method is employed as geographical information data.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제12B권1호
• /
• pp.1-6
• /
• 2002

The severe problem in improving the positioning precision of a permanent magnet linear synchronous motor (PMLSM) is the large detent farce caused by the permanent magnet arrangement. It is generally an undesired effect that contributes to the torque ripple, vibration and noise of machine. The detent force is arisen from the difference of the position of a permanent magnet end and a tooth position. In this paper, the four methods to reduce detent force were studied and analyzed. The methods are adjusting the width of permanent magnet, varying the shape of armature teeth, relocating the permanent magnet, and adjusting the width of permanent magnet and relocating the permanent magnet at the same time. To analyze the detent farce according to flour methods, a two-dimensional Finite Element Analysis [FEA] was used and we compared with the ratio of reduction of the detent farce according to the flour methods.

• 천문학회보
• /
• 제42권2호
• /
• pp.88.1-88.1
• /
• 2017

We report a novel design of the "linear astigmatism-free" three mirror system (LAF-TMS). In general, the linear astigmatism is one of the most dominant aberration degrading image qualities in common off-axis systems. The proposed LAF-TMS is based on a confocal off-axis three mirror system, where higher order aberrations are minimized via our numerical optimization. The system comprises three pieces of aluminum-alloy freeform mirrors that are feasible to be fabricated with current single-point diamond turning (SPDT) machining technology. The surface figures, dimensions, and positions of mirrors are carefully optimized for a LAF performance. For higher precision-positioning mechanism, we also included alignment parts: shims (for tilting) and L-brackets (for decentering). Any possible mechanical deformation due to assembly process as well as 1-G gravity, and its influence on optical performances of the system are investigated via the finite element (FE) analysis. The LAF-TMS has low f-number and a wide field of view, which is promising for sky monitoring programs such as supernova surveys.

• 대한기계학회논문집A
• /
• 제20권5호
• /
• pp.1419-1425
• /
• 1996

In this work, a precies actuator which is capable of high positioning accuracy is developed. For estimation the dynamic behavior of the actuator, system modeling is performed by employing a stick-slip frection law. Dynamic characteristics over various types of driving input signals and vibraiton loci of the driving tip are examined by experiments. Phase differences between the input signals are applied, and the dynamic behavior of slider is investigated. From the simulation and experimental results, it is observed that the dynamic behaviors from the simulation results agree fairly well to those of the experimental results. Thisindicates that the model developed in this work is applicable to other precision mechanisms in which a friction farce is as improtant factor for actuation.

• Journal of Mechanical Science and Technology
• /
• 제17권9호
• /
• pp.1268-1275
• /
• 2003

In this paper, a compact 3-DOF mobile microrobot with sub-micron resolution is presented. It has many outstanding features : it is as small as a coin ; its precision is of sub-micrometer resolution on the plane ; it has an unlimited travel range ; and it has simple and compact mechanisms and structures which can be realized at low cost. With the impact actuating mechanism, this system enable both fast coarse motion and highly precise fine motion with a pulse wave input voltage controlled. The 1 -DOF impact actuating mechanism is modeled by taking into consideration the friction between the piezoelectric actuator and base. This modeling technique is extended to simulate the motion of the 3-DOF mobile robot. In addition, experiments are conducted to verify that the simulations accurately represent the real system. The modeling and simulation results will be used to design the model-based controller for the target system. The developed system can be used as a robotic positioning device in the micromanipulation system that determines the position of micro-sized components or particles in a small space, or assemble them in the meso-scale structure.

• 한국생산제조학회지
• /
• 제7권4호
• /
• pp.96-103
• /
• 1998

With the advance of processing technology , so as to spare fuel, piston heads used in automobile reciprocating engine have complex 3-dimension, with respect to shape such as ovality, profile, eccentricity, offset, recess. Therefore, coming out of the existing process work used master cam. the process work is performed using a CNC lathe. For a precision processing, the processing work is need to make study of high speed feed gear synchronized with the rotative speed of main spindle. And then the high speed feeding system must maintain high dynamic stiffness, high speed and high positioning accuracy . In this paper, in order to achieve high speed cutting tool feeding. The linear brushless DC motor is used for satisfying this process work. The ball bush and turicite is used as the guidance of the feed gear system. Also linear encoders, digital servo amplifiers and controller are used for controlling driving motor. This paper presents the design and simulation of the new tool feed system for noncircular machining.