• 한국통신학회논문지
• /
• 제41권12호
• /
• pp.1759-1761
• /
• 2016

본 논문에서는 항법을 위해 가장 많이 사용하는 GPS 민간용 신호의 재방송 재밍에 의한 영향 분석을 바탕으로 수평 위치해의 표본분산에 따른 GPS 재방송 재밍신호 검출 기법을 제안하고, 그 성능을 분석한다.

• International Journal of Computer Science & Network Security
• /
• 제22권3호
• /
• pp.107-112
• /
• 2022

The automotive industry is motivated to provide more and more amenities to its customers. The industry is taking advantage of artificial intelligence by increasing different sensors and gadgets in vehicles machoism is forward collision warning, at the same time road accidents are also increasing which is another concern to address. So there is an urgent need to provide an A.I based system to avoid such incidents which can be address by using artificial intelligence and global positioning system. Automotive/smart vehicles protection has become a major study of research for customers, government and also automotive industry engineers In this study a two layered novel hypothetical approach is proposed which include in-time vehicle/obstacle detection with auto warning mechanism for collision detection & avoidance and later in a case of an accident manifestation GPS & video camera based alerts system and interrupt generation to nearby ambulance or rescue-services units for in-time driver rescue.

• Journal of Positioning, Navigation, and Timing
• /
• 제13권2호
• /
• pp.207-213
• /
• 2024

This paper examines the frame boundary detection performance for a satellite navigation augmentation signal orthogonally modulated with Hadamard code to determine the number of message preamble bits. Simulation results show that, even in weak signal environments, designing the message preamble with 32 bits is recommended for achieving stable frame boundary detection.

• Journal of Positioning, Navigation, and Timing
• /
• 제6권4호
• /
• pp.181-194
• /
• 2017

In recent years, research has been actively conducted on the navigation in an indoor environment where Global Navigation Satellite System signals are unavailable. Among them, a study performed indoor navigation by integrating pseudolite carrier and Inertial Measurement Unit (IMU) sensor. However, in this case, there was no solution for the cycle slip occurring in the carrier. In another study, cycle slip detection and compensation were performed by integrating Global Positioning System (GPS) and IMU in an outdoor environment. However, in an indoor environment, cycle slip occurs more easily and frequently, and thus the occurrence of half cycle slip also increases. Accordingly, cycle slip detection based on 1 cycle unit has limitations. Therefore, in the present study, the aforementioned problems were resolved by performing indoor navigation through the integration of pseudolite and ultra-low-cost IMU embedded in a smartphone and by performing half cycle slip detection and compensation based on this. In addition, it was verified through the actual implementation of real-time navigation.

• 한국측량학회지
• /
• 제37권5호
• /
• pp.397-402
• /
• 2019

Recently, with the emergence of autonomous vehicles and the increasing interest in safety, a variety of research has been being actively conducted to precisely estimate the position of a vehicle by fusing sensors. Previously, researches were conducted to determine the location of moving objects using GNSS (Global Navigation Satellite Systems) and/or IMU (Inertial Measurement Unit). However, precise positioning of a moving vehicle has lately been performed by fusing data obtained from various sensors, such as LiDAR (Light Detection and Ranging), on-board vehicle sensors, and cameras. This study is designed to enhance kinematic vehicle positioning performance by using feature-based recognition. Therefore, an analysis of the required precision of the observations obtained from the images has carried out in this study. Velocity and attitude observations, which are assumed to be obtained from images, were generated by simulation. Various magnitudes of errors were added to the generated velocities and attitudes. By applying these observations to the positioning algorithm, the effects of the additional velocity and attitude information on positioning accuracy in GNSS signal blockages were analyzed based on Kalman filter. The results have shown that yaw information with a precision smaller than 0.5 degrees should be used to improve existing positioning algorithms by more than 10%.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.7-12
• /
• 1994

This paper describes an outline of pseudorandom M-sequence and its applications to measurement and control engineering. At first, generation and properties of M-sequence is briefly described and then its applications to delay time measurement, information transmission by use of M-array, two dimensional positioning, fault detection of logical circuit, fault detection of RAM, linear and nonlinear system identification.

• Journal of Positioning, Navigation, and Timing
• /
• 제1권1호
• /
• pp.1-6
• /
• 2012

For a Global Positioning System (GPS) receiver, it is known that a Vector Delay Locked Loop (DLL) in which the code signals of each satellite are tracked in parallel by using navigation results shows better performance in the aspect of the tracking accuracy and the robustness than that of a Scalar DLL. However, the quantitative analysis and the logical grounds for that performance enhancement of the Vector DLL are not sufficient. This paper, therefore, proposes the structure of the GPS receiver with the Vector DLL and analyzes the performance of it. The tracking and the positioning accuracy of the Vector DLL are theoretically analyzed and confirmed by simulation results. From the simulation results, it can be seen that the tracking and positioning accuracy has been improved about 30% in case that the receiver is static and the positioning is conducted for every Pre-detection Integration Time (PIT) while C/N0 is 45 dB-Hz.

• Journal of Positioning, Navigation, and Timing
• /
• 제9권1호
• /
• pp.33-42
• /
• 2020

In Integration Approach (IA)-based Pedestrian Dead Reckoning (PDR), it is important to detect the exact zero-velocity of the foot with an Inertial Measurement Unit (IMU). By detecting zero-velocity during the stance phase of the foot touching the ground and executing Zero-velocity UPdaTe (ZUPT) at the exact time, stable navigation information can be provided by the PDR. When the pace is fast, however, it is not easy to accurately detect the zero-velocity because of the small stance phase interval and the large signal variance of the corresponding interval. Incorrect zero-velcity detection greatly causes navigation errors of IA-based PDR. In this paper, we propose a method to detect the zero-velocity stably even at high speed by novel buffering of IMU's output data and signal processing of the buffer. And we design a PDR based on this. By analyzing the performance of the proposed Zero-Velocity Detection (ZVD) algorithm and ZVD-based PDR through experiemnts, we confirm that the proposed method can provide accurate navigation information of pedestrians such as firefighters in the indoor space.

• Smart Structures and Systems
• /
• 제20권2호
• /
• pp.219-229
• /
• 2017

Outlier detection is an imperative task to identify the occurrence of abnormal events before the structures are suffered from sudden failure during their service lives. This paper proposes a two-phase method for the outlier detection of Global Positioning System (GPS) monitoring data. Prompt judgment of the occurrence of abnormal data is firstly carried out by use of the relational analysis as the relationship among the data obtained from the adjacent locations following a certain rule. Then, a negative selection algorithm (NSA) is adopted for further accurate localization of the abnormal data. To reduce the computation cost in the NSA, an improved scheme by integrating the adjustable radius into the training stage is designed and implemented. Numerical simulations and experimental verifications demonstrate that the proposed method is encouraging compared with the original method in the aspects of efficiency and reliability. This method is only based on the monitoring data without the requirement of the engineer expertise on the structural operational characteristics, which can be easily embedded in a software system for the continuous and reliable monitoring of civil infrastructure.

• 비파괴검사학회지
• /
• 제30권4호
• /
• pp.311-316
• /
• 2010

본 논문에서는 비파괴검사법 중 하나인 자기누설탐상검사법을 이용하여 지하에 매설된 가스 배관의 결함 위치를 검출하는 방법을 제안한다. 자기 누설 탐상 시스템을 통해 얻은 자기 누설 신호는 일반적으로 비선형성을 띄며 다양한 외부 요인으로 인한 신호의 왜곡이 심하다. 본 논문에서는 신호의 비선형성과 신호의 왜곡을 보정하는 신호 처리 기법 중 SQI(self quotient image)를 이용하여 배관 결함의 위치를 검출하였다. 실제로 제작된 모의시험 배관에 제작된 다양한 인공 결함에 대해 알고리즘을 적용한 결과 기존 DCT(discrete cosine transform) 계수 기반 방법에 비해 결함 검출 성능이 크게 향상됨을 확인하였다.