• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.2
• /
• pp.79-85
• /
• 2019

The mission tasks of polar exploration utilizing unmanned systems such as glacier monitoring, ecosystem research, and inland exploration have been expanded. To facilitate unmanned exploration mission tasks, precise and robust navigation systems are required. However, limitations on the utilization of satellite navigation system are present due to satellite orbital characteristics at the polar region located in a high latitude. The orbital inclination of global positioning system (GPS), which was developed to be utilized in mid-latitude sites, was designed at $55^{\circ}$. This means that as the user is located in higher latitudes, the satellite visibility and vertical precision become worse. In addition, the use of satellite-based wide-area augmentation system (SBAS) is also limited in higher latitude regions than the maximum latitude of signal reception by stationary satellites, which is $70^{\circ}$. This study proposes a local-area augmentation system that additionally utilizes Global Navigation Satellite System (GLONASS) considering satellite navigation system environment in Polar Regions. The orbital inclination of GLONASS is $64.8^{\circ}$, which is suitable in order to ensure satellite visibility in high-latitude regions. In contrast, GLONASS has different system operation elements such as configuration elements of navigation message and update cycle and has a statistically different signal error level around 4 m, which is larger than that of GPS. Thus, such system characteristics must be taken into consideration to ensure data integrity and monitor GLONASS signal fault. This study took GLONASS system characteristics and performance into consideration to improve previously developed fault detection algorithm in the local-area augmentation system based on GPS. In addition, real GNSS observation data were acquired from the receivers installed at the Antarctic King Sejong Station to analyze positioning accuracy and calculate test statistics of the fault monitors. Finally, this study analyzed the satellite visibility of GPS/GLONASS-based local-area augmentation system in Polar Regions and conducted performance evaluations through simulations.

• International conference on construction engineering and project management
• /
• 2022.06a
• /
• pp.1138-1145
• /
• 2022

While pursuing digitalization and paperless projects, the construction industry needs to settle on how to make the most of digitized data and information. On-site workers, who currently rely on paper documents to check and review design and construction plans, will need alternative ways to efficiently access the information without using any paper. Augmented Reality is a potential solution where the information customized to a user is aligned with the physical world. This paper proposes the Augmented Reality framework to deliver the information on on-site resources (e.g., workers and equipment) using head-mounted devices. The proposed framework was developed by interoperating Augmented Reality-supported devices and a digital twin platform in which all information related to ongoing tasks is accumulated in real-time. On-site resources appearing in the user's field of view are automatically detected by an object detection algorithm and then assigned to the corresponding information by matching the data in the digital twin platform. Preliminary experiments show the feasibility of the proposed framework. Worker detection results can be visualized on HoloLens 2 in near real-time, and the matching process obtained the accuracy greater than 88%.

• Korean Journal of Artificial Intelligence
• /
• v.12 no.3
• /
• pp.9-15
• /
• 2024

This paper addresses the critical need for quadcopters in GPS-denied indoor environments by proposing a novel attitude control mechanism that enables autonomous navigation without external guidance. Utilizing AR marker detection integrated with a dual PID controller algorithm, this system ensures accurate maneuvering and positioning of the quadcopter by compensating for the absence of GPS, a common limitation in indoor settings. This capability is paramount in environments where traditional navigation aids are ineffective, necessitating the use of quadcopters equipped with advanced sensors and control systems. The actual position and location of the quadcopter is achieved by AR marker detection technique with the image processing system. Moreover, in order to enhance the reliability of the attitude PID control, the dual closed loop control feedback PID control with dual update periods is suggested. With AR marker detection technique and autonomous attitude control, the proposed quadcopter system decreases the need of additional sensor and manual manipulation. The experimental results are demonstrated that the quadrotor's autonomous attitude control and operation with the dual closed loop control feedback PID controller with hierarchical (inner-loop and outer-loop) command update period is successfully performed under the non-GPS aided indoor environment and it enhanced the reliability of the attitude and the position PID controllers within 17 seconds. Therefore, it is concluded that the proposed attitude control mechanism is very suitable to GPS-denied indoor environments, which enables a quadcopter to autonomously navigate and hover without external guidance or control.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2015

The number of mobile terminals equipped with a GPS module is steadily increasing today. However, because they using code pseudorange measurements in positioning, the positioning accuracy of mobile terminals is lower than that of those receivers using carrier phases. Especially, the multipath signal causes more significant errors in code pseudoranges. Therefore, the techniques of multipath detection and elimination is necessary. In this study, as an initial analysis of multipath detection and elimination technique development, we tested the feasibility of multipath signal detection using GPS signal strength information. We found that the GPS signal strength increases as the elevation angle gets higher in the open-sky environment. Also, we found that the signal strength decreases when there were some signal reflectors nearby. We checked the repeatability of the signal strength variation characteristics by reflecting repeat time of GPS satellites. As a result, this characteristics repeats almost perfectly when GPS satellites pass the same orbit. Therefore, we found that it is not a temporary phenomenon and the multipath signal detection should be possible by using GPS signal strength information.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.11a
• /
• pp.219-225
• /
• 2000

The major movement block of the containers have range between apron and designation points on yard in container terminal. The yard tractor operated by human takes charge of its movement in conventional container terminal. In automated container terminal, AGV(Automated Guided Vehicle) has charge of the yard tractor's role and the navigation path is ordered from upper level control system. The automated container terminal facilities must have the docking system to guide landing line to have high speed travelling and precision positioning. The general method for docking system uses the vision system with CCD camera, infra red, and laser. This paper describes the detection of AGV's position and orientation using laser slit beam to develop docking system.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.3
• /
• pp.152-156
• /
• 2010

Non-line-of-sight (NLOS) propagation is one of the challenges in radio positioning. Distinguishing the transmission status of the communication as line-of-sight (LOS) or NLOS is of great importance for the wireless communication systems. This paper focuses on the identification of NLOS based on time-of-arrival (TOA) distance estimates and the received signal strength (RSS) measurements. We set a path loss threshold based on the joint TOA and RSS based NLOS detection method to determine LOS or NLOS. Simulation results show that the proposed method ensures the correct of detection for the LOS condition and can improve the NLOS identification for the weak noise and long distance.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.2
• /
• pp.239-246
• /
• 2004

In this paper, we develop and implement a high integrity GNC(Guidance, Navigation, and Control) system, based on the combined use of the Global Positioning System (GPS) and an Inertial Measurement Unit (IMU), for autonomous land vehicle applications. This paper highlights guidance for the predetermined trajectory and navigation with detection of possible faults during the fusion process in order to enhance the integrity of the navigation loop. The implementation of the GNC system to the autonomous land vehicle presented with fault detection methodology considers high frequency faults from the GPS receiver caused by shadowing and multipath error The implementation, based on a low-cost, strapdown INS aided by standard GPS technology, is described. The results of the field test in the urban environment are presented and showed effectiveness of the GNC system.

• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.182-188
• /
• 2011

This paper describes a method of road tracking by using a vision and laser with extracting road boundary (road lane and curb) for navigation of intelligent transport robot in structured road environments. Road boundary information plays a major role in developing such intelligent robot. For global navigation, we use a global positioning system achieved by means of a global planner and local navigation accomplished with recognizing road lane and curb which is road boundary on the road and estimating the location of lane and curb from the current robot with EKF(Extended Kalman Filter) algorithm in the road assumed that it has prior information. The complete system has been tested on the electronic vehicles which is equipped with cameras, lasers, GPS. Experimental results are presented to demonstrate the effectiveness of the combined laser and vision system by our approach for detecting the curb of road and lane boundary detection.

• Nuclear Engineering and Technology
• /
• v.37 no.2
• /
• pp.185-190
• /
• 2005

The Korea Institute of Radiological and Medical Sciences (KIRAMS) electron microbeam system has been built with its prototype components. The system is composed of an electron gun, a beam transport chamber, and a cell image acquisition and positioning stage. Each component has been upgraded through repetitive performance tests for various parametric arrangements. This paper presents the preliminary results of the performance test on the beam control and detection parts of the system.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.125-135
• /
• 2012

This paper proposes the new object detection system with two laser-scanners and a camera for classifying the objects and predicting the location of objects on road street. This detection system could be applied the new C-ITS service such as ADAS(Advanced Driver Assist System) or (semi-)automatic vehicle guidance services using object's types and precise position. This study describes the some examples in other countries and feasibility of object detection system based on a camera and two laser-scanners. This study has developed the heterogenous sensor's fusion method and shows the results of implementation at road environments. As a results, object detection system at roadside infrastructure is a useful method that aims at reliable classification and positioning of road objects, such as a vehicle, a pedestrian, and obstacles in a street. The algorithm of this paper is performed at ideal condition, so it need to implement at various condition such as light brightness and weather condition. This paper should help better object detection and development of new methods at improved C-ITS environment.