• 한국측량학회지
• /
• 제37권5호
• /
• pp.397-402
• /
• 2019

Recently, with the emergence of autonomous vehicles and the increasing interest in safety, a variety of research has been being actively conducted to precisely estimate the position of a vehicle by fusing sensors. Previously, researches were conducted to determine the location of moving objects using GNSS (Global Navigation Satellite Systems) and/or IMU (Inertial Measurement Unit). However, precise positioning of a moving vehicle has lately been performed by fusing data obtained from various sensors, such as LiDAR (Light Detection and Ranging), on-board vehicle sensors, and cameras. This study is designed to enhance kinematic vehicle positioning performance by using feature-based recognition. Therefore, an analysis of the required precision of the observations obtained from the images has carried out in this study. Velocity and attitude observations, which are assumed to be obtained from images, were generated by simulation. Various magnitudes of errors were added to the generated velocities and attitudes. By applying these observations to the positioning algorithm, the effects of the additional velocity and attitude information on positioning accuracy in GNSS signal blockages were analyzed based on Kalman filter. The results have shown that yaw information with a precision smaller than 0.5 degrees should be used to improve existing positioning algorithms by more than 10%.

• 한국멀티미디어학회논문지
• /
• 제22권9호
• /
• pp.1011-1019
• /
• 2019

In this paper, we propose a system that can more precisely identify and monitor the position of the tool used in the assembling workplace such as automobile production. The proposed positioning monitoring system is a combination of UWB communication module and MEMS IMU sensor. Since UWB does not need modulation and demodulation function and has low power density, UWB is widely used in indoor positioning field. However, it may cause positioning error due to errors in RF transmission and reception process, which may cause positioning accuracy. Therefore, in this paper, we propose an algorithm that uses IMU as an auxiliary means to compensate for errors that may occur in positioning using only UWB. The tag and anchor of UWB module measure the transmission / reception time by transmitting signals to each other and then estimate the distance between tag and anchor. The MEMS IMU sensor serves to provide positioning calibration information. The tag, which is a mobile node and attached to a moving tool, measures the three-dimensional position of the tool and transfers the coordinate data to the anchor. Thus, it is possible to confirm whether or not the specific tool is properly used according to the prescribed regulations.

• Journal of Positioning, Navigation, and Timing
• /
• 제10권2호
• /
• pp.75-82
• /
• 2021

Fields of high-precision positioning applications are growing fast across the mass market worldwide. Accordingly, the industry is focusing on developing methods of applying State-Space Representation (SSR) corrections on low-cost GNSS receivers. Among SSR correction types, this paper analyzes Safe Position Augmentation for Real Time Navigation (SPARTN) messages being offered by the SAfe and Precise CORrection DAta (SAPCORDA) company and validates positioning algorithms based on them. The first part of this paper introduces the SPARTN format in detail. Then, procedures on how to apply Basic-Precision Atmosphere Correction (BPAC) and High-Precision Atmosphere Correction (HPAC) messages are described. BPAC and HPAC messages are used for correcting satellite clock errors, satellite orbit errors, satellite signal biases and also ionospheric and tropospheric delays. Accuracies of positioning algorithms utilizing SPARTN messages were validated with two types of positioning strategies: Code-PPP using GPS pseudorange measurements and PPP-RTK including carrier phase measurements. In these performance checkups, only single-frequency measurements have been used and integer ambiguities were estimated as float numbers instead of fixed integers. The result shows that, with BPAC and HPAC corrections, the horizontal accuracy is 46% and 63% higher, respectively, compared to that obtained without application of SPARTN corrections. Also, the average horizontal and vertical RMSE values with HPAC are 17 cm and 27 cm, respectively.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.343-349
• /
• 2011

Now, for the continuous location detection of train, the method that the moving distance of a vehicle is detected using an wheel sensor(odometer) mounted within a train, is generally used. It has a problem that the positioning errors of a train can be accumulated as the moving distance increases. To solve this problem, it is required to apply a variety of positioning sensors and to integrate with sensor data. In this paper, we develop the train-borne positioning system applicable to the conventional railway and high-speed railway, and verify the performance of the train-borne positioning system through a vehicle test.

• 산업기술연구
• /
• 제28권A호
• /
• pp.97-104
• /
• 2008

Recently, interests on positioning system for location-based services have been significantly increased. Many indoor environment systems using fingerprint scheme have been designed to take more accuracy of positioning, but they are inefficient in adapting to change of environments. In this paper, we focus on a client-based positioning system over WLAN for decreasing installation cost and adapting to change of environments. In the proposed system, APs with stable RSSI are selected as base APs independently for each reference point. Experimental results show that proposed system expands service area approximately 20% much than traditional systems using K-NN algorithm and needs only 20% modification process to fingerprint data compare with traditional systems whenever environment conditions are changed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.378-391
• /
• 2002

A 250mm stroke aerostatic stage, which detects position with laser scale and is driven by linear motor, is made and analyzed positioning error in 20$\pm$ 0.5 $^{\circ}C$ controlled atmosphere, aiming at investigating positioning characteristic of ultra-precision stage. We prove this aerostatic stage has a 10nm micro step resolution by experiment. By means of analyzing laser interferometer system, the scale of measuring error is about 0.2-0.4$\mu\textrm{m}$ according to refractive index error from missing the temperature change. To improve laser interferometer system, compensate refractive index error using measuring data from thermocouple. And, confirm 0.10$\mu\textrm{m}$ repeatability and 0.13 $\mu\textrm{m}$ positioning accuracy using the compensating refractive index. Also, we confirm 0.07 ${\mu}{\textrm}{m}$ repeatability of the stage using capacitive displacement sensor.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.2054-2061
• /
• 2010

본 논문에서는 최적 포지셔닝을 정의하고, 직교변환행렬을 이용하여 포지셔닝의 축을 직교회전 시키는 방법을 제시하고, 최적 포지셔닝 구현을 위한 최적의 회전 각도를 찾아, 궁극적으로는 최적 포지셔닝을 구현하는데 그 목 적이 있다. 또한 최적의 회전 각도를 찾는 최적화 각도 알고리즘을 제안한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.795-800
• /
• 2008

The paper presents research for the established experiment environment of multi vehicle robot, localization algorithm that is based on vehicle control, and path tracking. The established experiment environment consists of ultrasonic positioning system, vehicle robot, server and wireless module. Ultrasonic positioning system measures positioning for using ultrasonic sensor and generates many errors because of the influence of environment such as a reflection of wall. For a solution of this fact, localization algorithm is proposed to determine a location using vehicle kinematics and selection of a reliable location data. And path tracking algorithm is proposed to apply localization algorithm and LOS, finally, that algorithms are verified via simulation and experimental

• Journal of Positioning, Navigation, and Timing
• /
• 제7권4호
• /
• pp.205-215
• /
• 2018

The recent emergence of new Global Navigation Satellite Systems (GNSS) has resulted in a gradual improvement in the performance of positioning services. This paper verifies the degree of improvement in positioning performance of Assisted-GNSS (A-GNSS) receivers using assistance information compared to standalone-GNSS receivers that do not use assistance information in various urban environments in Korea. For this purpose, field tests are performed in various urban and indoor environments in Korea. The assistance information is provided by u-blox's AssistNow Online and low-cost commercial receivers are used for mobile station receivers. Through experiments, the Time to First Fix (TTFF), acquisition sensitivity, and position accuracy performance improvement are analyzed. The results of the experiments show that using assistance data improved the performance in all experiment locations, and, in particular, a significant performance improvement in terms of TTFF.

• Asia Marketing Journal
• /
• 제17권3호
• /
• pp.33-51
• /
• 2015

This study investigates which variables most effectively influence the positioning strategy of a brand. In addition, we test the connection between the positioning strategy of the brand and loyalty. Finally, we explore how brand experience effects the relationship between brand position and brand loyalty. To this end, this study employs the street-intercept method to collect data on consumers' perception of home appliances in Japan and conducts structural equation modeling analysis to test our hypotheses. Specifically, we find that assessments of product, service, and image have a significant impact on a brand's position which, in turn, drives brand loyalty. In addition, brand experience seems to moderate the relationship between service and brand positioning effectiveness. We also find that price promotions negatively affect brand loyalty. The research provides a consumer-centered, experiential view of how firms can develop strategies to more effectively position brands and increase loyalty among their customers. These results help both academics and practitioners to better understand how consumers assess a brand's position in the marketplace.