• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.25 no.12
• /
• pp.881-887
• /
• 2015

The stiffness and natural frequencies for blades, flexbeam, and torque tube of bearingless rotor system are measured to determine the material input properties such as mass distributions and stiffness distribution for the rotor dynamics and load analysis. The flap stiffness, lag stiffness, and torsional stiffness are calculated by measuring section strain or twist angle, gages position, and applied loads through bending and twist tests. The modal tests are undertaken to find out the natural frequencies for flap, lag, torsion modes in non-rotating conditions. The stiffness values and mass properties are tuned and updated to match prediction frequencies to the measured frequencies. The rotorcraft comprehensive code(CAMRAD II) is used to analyze the natural frequencies of the specimens. The analysis results with the updated material properties agree well with the measured frequencies. The updated properties will be used to analyze the rotor stability, dynamic characteristics and loads for the rotor rotation test in a whirl tower.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.8
• /
• pp.720-728
• /
• 2012

It is important for identification of noise and vibration problem of tire to consider influence of interaction between road and tire. A quantification of road noise is a challenging issue in vehicle NVH due to extremely complicated transfer paths of road noise as well as the difficulty in an experimental identification of input force from tire-road interaction. A noise caused by tire is divided into road noise(structure-borne noise) and pattern noise(air-borne noise). Pattern noise is caused by pattern shape of tire, which has larger than 500 Hz, but road noise is generated by the interactions between a tire and a vehicle body. In this paper, we define the quantitative analysis for road noise caused by interactions between tire and road parameters. For the identification of road noise, the chassis dynamometer that is equipped $10mm{\times}10mm $ square cleat in the semi-anechoic chamber is used, and the tire spindle forces are measured by load cell. The vibro-acoustic transfer function between ear position and wheel center was measured by the vibro-acoustic reciprocity method. In this study three tires with different type of mechanical are used for the experiment work.

• Proceedings of the ESK Conference
• /
• 1995.04a
• /
• pp.155-164
• /
• 1995

For efficient operation, vital hand controls must be easily controlled by the operator from his normal working position. The primary working area based on operator's working comfort was developed to serve as a design guideline tothe control panel layout. Ten male subjects participated in the experiment in which working comfort was measured for two controls of a lever type control and a knob type control with respect to the frontal and sagittal distances from the body center and the slope of a workplace. The response surface methodolgy using a central composite design was employed to develop a prediction model for perceived working comfort of each control. Both controls have a similar pattern of comfortable working area, but the lever type control has slightly broader working area. The concept of the proposed working area is a significant extension to the conventional working area such as Farley's or Squires' curves. It is shown that the distance toa control device and the slope have a quadratic effect to working comfort. It is noticeable that comfortable working area exists outside the conventional working area. The result of the response surface analysis also indicated that a little slope of about 15 .deg. for a control panel improves working comfort.

• Journal of Korea Multimedia Society
• /
• v.13 no.12
• /
• pp.1739-1747
• /
• 2010

The damage of natural disasters has occurred on huge scale more frequently than before. The damage caused by the disasters are summarized and are analyzed, and are managed as a very general type of documentation, not showing the position of previous damage records and related information such as weather, facilities of CCTV, hospitals, and gas station on the maps. Therefore, it needs to provide map-based searching systems considering damaged area as well as search key-words. This paper focuses on the development of a search system based on the map to manage previous disaster records and related information each disaster using spatial databases. This system consists of three modules, which are databases to store disaster data, the SQL procedure-based search module to extract needed information from the constructed databases, and the map module to express the search results on the map. This paper will contribute to provide framework of a system development for managing the disaster information according to each year and disaster based on the maps and to be utilized as the basic framework in developing damage prediction and prevention systems for disasters in future.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.6
• /
• pp.253-260
• /
• 1998

An approximate method for the calculation of creep deflections of reinforced concrete beams under sustained service loads is proposed. The position of neutral axis and strain and stress distribution of fully cracked section after creep is determined from the requirements of strain compatibility and equilibruim of a section and then the long-term flexural rigidity of fully cracked section is determined based on the new neutral axis. The long-term flexural rigidity of uncracked section at the level of the reinforcenment. The approach of calculating long-term effective flexural rigidity and defections is similar to the current American Concrete Institue procedure for calculating effecitve moment of inertia and short-term deflections. The accuracy of the analysis is verified by comparison with several experimental mesurements of beam deflectons. The result is good between the theotetical values and mesured valus.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.4
• /
• pp.187-192
• /
• 2013

Because of the importance of small target detection in infrared images, many studies have been carried out in this area. Using a Kalman filter and mean shift algorithm, this study proposes an algorithm to track multiple small moving targets even in cases of target disappearance and appearance in serial infrared images in an environment with many noises. Difference images, which highlight the background images estimated with a background estimation filter from the original images, have a relatively very bright value, which becomes a candidate target area. Multiple target tracking consists of a Kalman filter section (target position prediction) and candidate target classification section (target selection). The system removes error detection from the detection results of candidate targets in still images and associates targets in serial images. The final target detection locations were revised with the mean shift algorithm to have comparatively low tracking location errors and allow for continuous tracking with standard model updating. In the experiment with actual marine infrared serial images, the proposed system was compared with the Kalman filter method and mean shift algorithm. As a result, the proposed system recorded the lowest tracking location errors and ensured stable tracking with no tracking location diffusion.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.2
• /
• pp.97-105
• /
• 2020

In order to set up radar cross section(RCS) reduction factors for a target, the scattering point position of the target should be identified through inverse synthetic aperture radar(ISAR) image analysis. For this purpose, ISAR image focusing is important. Maritime ship is non-linear maneuvering in the sea, however, which blur the ISAR image. To solve this problem, translational and rotational motion compensation are essential to form focused ISAR image. In this paper, hourglass and ISAR image analysis are performed on the collected data in the sea instead of using the prediction software tool, which takes much time and cost to make computer-aided design(CAD) model of the ship.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.9
• /
• pp.903-912
• /
• 2009

This study is focused on simulation-based dimensional tolerance optimization process (DTOP) to minimize vehicle pulls by reduction of dimensional variation in front suspension system. In previous studies, the effect of tires and wheel alignment sensitivity have mainly been investigated to eliminate vehicle pulls in nominal design condition without allocating optimal tolerance level for selected components, among various factors regarding vehicle pulls such as vehicle design parameters, vehicle weight balance, tires, and environmental factors. Unfortunately, there are wide variations in the real vehicle, and these have impacted actual vehicle pulls, especially wheel alignment effects from suspension geometry variation has not been considered in the previous studies. In the tolerance design of suspension, tolerance variables with the uncertainty such as parts dimensional variation, assembly process, datum position and direction, and assembly tool tolerance has a great influence on the variation of the suspension dimensional performances. This study introduces total vehicle pull prediction model in considering major key factors for vehicle pull sensitivity. The Monte Carlo-based tolerance analysis model using Taguchi robust method is developed to optimize dimensional tolerance parameters, satisfying on the target variation level.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.42 no.1
• /
• pp.29-41
• /
• 2017

Korea is expected to become a super-aged society by 2050. Given an aging population and the increasing pressure for the early retirement, a sufficient social safety net for elderly population becomes important. The Korean government introduced public reverse mortgage program in 2007, which is a product for aging seniors and the elderly, The number of reverse mortgage subscribers has also steadily grown. The demand continues to grow, but the reverse mortgage over a long period of time is a highly uncertain and risky product in the position of guarantee or lending institution. Thus, suitable demand prediction of the reverse mortgage subscribers is necessary for stable and sustainable operation. This study uses a Bass diffusion model to forecast the long-term demand for reverse mortgage and provides insight into reverse mortgage by forecasting demand for stability and substantiality of the loan product. We represent the projections of new subscribers on the basis of the data obtained from Korea Housing Finance Corporation. Results show that potential market size of Korean reverse mortgage reaches approximately 760,000-1,160,000 households by 2020. We validate the results by comparing the estimate of the cumulative number of subscribers with that found in literature.

• Earthquakes and Structures
• /
• v.9 no.1
• /
• pp.1-27
• /
• 2015

In this paper Fragility Curves (FCs) relevant to existing RC framed building types representative of the Italian building population designed only to vertical load and regular in-plan have been derived from an extensive campaign of non-linear dynamic analyses. In the generation of the FCs, damage states according to the EMS98 scale have been considered while the intensity measure has been defined by adopting an integral parameter, such as the Housner intensity. FCs have been generated by varying different parameters, including building age, number of storeys, presence and position of infill panels, plan dimensions, external beams stiffness and concrete strength. In order to verify the effectiveness of the damage prediction, comparisons were made between the results obtained from the proposed FCs with those deriving from both prominent fragility studies available in the technical literature and damage distributions observed in past earthquakes. Results show that damage grades obtained by adopting the proposed FCs are generally lower than those provided by the other approaches considered. A comparison with real damage data, shows that the proposed FCs generally estimate more severe damage distributions than those observed in past earthquakes, although they give lower differences with respect to the other approaches.