• 전기전자학회논문지
• /
• 제23권1호
• /
• pp.295-301
• /
• 2019

바이오샘플의 DNA를 대량 증폭할 수 있는 휴대형 실시간 중합효소연쇄반응(Real-time PCR) 기기에서 히터는 PCR 반응 온도를 제어하기 위한 중요한 요소 중의 하나이다. 보통 빠른 히팅을 위해 소형 PCR 칩에 집적화되어 있고, 반도체 공정을 이용하여 박막형태로 제작되어 PCR 칩 제작 단가가 높은 편이다. 따라서 본 연구에서는 값싸고 온도제어를 정확히 할 수 있는 히터로 칩 저항을 사용하는 것을 제안한다. 칩 저항을 사용한 히터는 구조가 단순하고 제작이 쉽다는 장점이 있다. $2.54{\times}2.54cm^2$ 크기의 실시간 PCR 칩 위에 칩 저항을 1개 또는 2개를 사용했을 때 온도분포를 시뮬레이션 하였고, 고른 온도분포를 갖는 PCR 칩을 제작했다. 또한 효율적인 PCR 칩 냉각을 위해 소형 fan이 내장된 하우징을 설계하였고, 3D 프린터로 제작했다. 온도제어는 마이크로프로세서를 이용한 PID제어법(Proportional-Integral-Differential control)을 적용했다. 온도상승비와 하강비는 각각 $18^{\circ}C/s$, $3^{\circ}C/s$이며, 각 PCR 반응 단계의 유지 시간을 30초로 하였을 때, 한 사이클은 약 2.66분이 걸렸고, 35 사이클은 약 93 분 내로 진행할 수 있었다.

• 농업과학연구
• /
• 제38권4호
• /
• pp.761-767
• /
• 2011

The objective of this study was to predict total bacteria count of pork meats by using the portable electronic nose systems developed throughout two stages of the prototypes. Total bacteria counts were measured for pork meats stored at $4^{\circ}C$ for 21days and compared with the signals of the electronic nose systems. PLS(Partial least square), PCR (Principal component regression), MLR (Multiple linear regression) models were developed for the prediction of total bacteria count of pork meats. The coefficient of determination ($R_p{^2}$) and root mean square error of prediction (RMSEP) for the models were 0.789 and 0.784 log CFU/g with the 1st system for the pork loin, 0.796 and 0.597 log CFU/g with the 2nd system for the pork belly, and 0.661 and 0.576 log CFU/g with the 2nd system for the pork loin respectively. The results show that the developed electronic system has potential to predict total bacteria count of pork meats.

• Parasites, Hosts and Diseases
• /
• 제59권1호
• /
• pp.77-82
• /
• 2021

As malaria remains a major health problem worldwide, various diagnostic tests have been developed, including microscopy-based and rapid diagnostic tests. LabChip real-time PCR (LRP) is a small and portable device used to diagnose malaria using lab-on-a-chip technology. This study aimed to evaluate the diagnostic performance of LRP for detecting malaria parasites. Two hundred thirteen patients and 150 healthy individuals were enrolled from May 2009 to October 2015. A diagnostic detectability of LRP for malaria parasites was compared to that of conventional RT-PCR. Sensitivity of LRP for Plasmodium vivax, P. falciparum, P. malariae, and P. ovale was 95.5%, 96.0%, 100%, and 100%, respectively. Specificity of LRP for P. vivax, P. falciparum, P. malariae, and P. ovale was 100%, 99.3%, 100%, and 100%, respectively. Cohen's Kappa coefficients between LRP and CFX96 for detecting P. vivax, P. falciparum, P. malariae, and P. ovale were 0.96, 0.98, 1.00, and 1.00, respectively. Significant difference was not observed between the results of LRP and conventional RT-PCR and microscopic examination. A time required to amplify DNAs using LRP and conventional RT-PCR was 27 min and 86 min, respectively. LRP amplified DNAs 2 times more fast than conventional RT-PCR due to the faster heat transfer. Therefore, LRP could be employed as a useful tool for detecting malaria parasites in clinical laboratories.

• 식물병연구
• /
• 제18권4호
• /
• pp.298-303
• /
• 2012

토마토황화잎말림바이러스(Tomato yellow leaf curl virus; TYLCV)는 온실가루이(Bemisia tabaci)에 의해서 영속전염되는 DNA 바이러스로 토마토에 발생하는 가장 중요한 병 중 하나이다. 우리나라에서 TYLCV는 2008년 최초로 보고된 이래 급속하게 전국적으로 확산되어 토마토 생산에 심각한 경제적 손실을 일으키고 있다. 토마토 생산과정에서 TYLCV의 확산을 최소화하기 위해 바이러스의 조기진단이 매우 중요하다. 본 연구에서는 바이러스의 신속진단을 위해 초고속 정밀 PCR 진단기술을 개발하였으며, 이는 마이크로칩을 기반으로 하여 $5{\mu}l$의 시료만으로 PCR을 수행할 수 있도록 고안된, 휴대가 가능할 정도의 소형 GenSpector$^{TM}$ TMC-1000 PCR 기기를 이용한 새로운 기술이다. 본 연구에서 개발된 초고속 정량 PCR을 이용하였을 때 TYLCV 진단을 위한 30 cycle의 PCR과 용융점분석(melting curve analysis)에 15분 이내의 시간이 소요되었으며, GenSpector$^{TM}$ TMC-1000 PCR을 이용한 초고속 정밀진단 기술은 향후 TYLCV의 대발생을 모니터링하는데 유용하게 사용될 수 있을 것으로 생각한다. 본 연구결과는 GenSpector$^{TM}$ TMC-1000 PCR기반의 초고속정량 PCR 기술을 이용한 식물 바이러스의 진단기술 개발로는 최초의 보고이다.

• 분석과학
• /
• 제29권2호
• /
• pp.79-84
• /
• 2016

최근 손안에 들어올 정도로 크기가 작아 범죄현장 등에서 사용이 가능하며, 다른 일반적인 장비들에 비해 가격이 1/10이하로 저렴하여 누구나 사용할 수 있는 MiniPCR^TM mini8 Thermal Cycler (Amplyus, Cambridge, MA, USA)가 개발되었다. 본 연구에서는 DNA감식에 일반적으로 사용되고 네 가지 종류의 상염색체 STR 다중증폭 키트들과 한 종류의 Y 염색체 STR 증폭키트, 그리고 미토콘드리아 DNA HV1/HV2의 염기서열 분석법을 사용하여 MiniPCR^TM mini8 Thermal Cycler의 성능을 Applied Biosystems사의 GeneAmp^® PCR system 9700와 비교하였다. STR 다중증폭키트 키트들의 민감도와 증폭 불균형 정도를 비교한 결과 두 PCR 장비에서 큰 차이가 없었으며, 미토콘드리아 DNA HV1/HV2의 염기서열 분석 결과도 동등하였다. MiniPCR^TM mini8 Thermal Cycler는 DNA 감식 실험실은 물론이고, 가격이 저렴해 학교와 개인이 간편하게 사용할 수 있으며, 휴대가 간편해 차량이나 야외에서 활용 될 수 있을 것으로 기대된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.273-273
• /
• 2013

Recently, Point-of-care (POC) testing microdevices enable to do the patient monitoring, drug screening, pathogen detection in the outside of hospital. Immunochromatographic strip (ICS) is one of the diagnostic technologies which are widely applied to POC detection. Relatively low cost, simplicity to use, easy interpretations of the diagnostic results and high stability under any circumstances are representative advantages of POC diagnosis. It would provide colorimetric results more conveniently, if the genetic analysis microsystem incorporates the ICS as a detector part. In this work, we develop a reverse transcriptase-polymerase chain reaction (RT-PCR) microfluidic device integrated with a ROSGENE strip for colorimetric influenza H1N1 virus detection. The integrated RT-PCR- ROSGENE device is consist of four functional units which are a pneumatic micropump for sample loading, 2 ${\mu}L$ volume RT-PCR chamber for target gene amplification, a resistance temperature detector (RTD) electrode for temperature control, and a ROSGENE strip for target gene detection. The device was fabricated by combining four layers: First wafer is for RTD microfabrication, the second wafer is for PCR chamber at the bottom and micropump channel on the top, the third is the monolithic PDMS, and the fourth is the manifold for micropump operation. The RT-PCR was performed with subtype specific forward and reverse primers which were labeled with Texas-red, serving as a fluorescent hapten. A biotin-dUTP was used to insert biotin moieties in the PCR amplicons, during the RT-PCR. The RT-PCR amplicons were loaded in the sample application area, and they were conjugated with Au NP-labeled hapten-antibody. The test band embedded with streptavidins captures the biotin labeled amplicons and we can see violet colorimetric signals if the target gene was amplified with the control line. The off-chip RT-PCR amplicons of the influenza H1N1 virus were analyzed with a ROSGENE strip in comparison with an agarose gel electrophoresis. The intensities of test line was proportional to the template quantity and the detection sensitivity of the strip was better than that of the agarose gel. The test band of the ROSGENE strip could be observed with only 10 copies of a RNA template by the naked eyes. For the on-chip RT-PCR-ROSGENE experiments, a RT-PCR cocktail was injected into the chamber from the inlet reservoir to the waste outlet by the micro-pump actuation. After filling without bubbles inside the chamber, a RT-PCR thermal cycling was executed for 2 hours with all the microvalves closed to isolate the PCR chamber. After thermal cycling, the RT-PCR product was delivered to the attached ROSGENE strip through the outlet reservoir. After dropping 40 ${\mu}L$ of an eluant buffer at the end of the strip, the violet test line was detected as a H1N1 virus indicator, while the negative experiment only revealed a control line and while the positive experiment a control and a test line was appeared.

• Journal of Microbiology and Biotechnology
• /
• 제28권11호
• /
• pp.1928-1936
• /
• 2018

Recently, human infections caused by severe fever with thrombocytopenia syndrome virus (SFTSV), which can lead to fatality, have dramatically increased in East Asia. With the unavailability of vaccines or antiviral drugs to prevent and/or treat SFTSV infection, early rapid diagnosis is critical for prevention and control of the disease. Here, we report the development of a simple, rapid and sensitive portable detection method for SFTSV infection applying reverse transcription-loop mediated isothermal amplification (RT-LAMP) combined with one-pot colorimetric visualization and electro-free reaction platform. This method utilizes a pocket warmer to facilitate diagnosis in a resource-limited setting. Specific primers were designed to target the highly-conserved region of L gene of SFTSV. The detection limit of the RT-LAMP assay was approximately $10^0$ viral genome copies from three different SFTSV strains. This assay exhibited comparable sensitivity to qRT-PCR and 10-fold more sensitivity than conventional RT-PCR, with a rapid detection time of 30 to 60 minutes. The RT-LAMP assay using SFTSV clinical specimens has demonstrated a similar detection rate to qRT-PCR and a higher detection rate compared to conventional RT-PCR. Moreover, there was no observed cross-reactive amplification of other human infectious viruses including Japanese Encephalitis Virus (JEV), Dengue, Enterovirus, Zika, Influenza and Middle East Respiratory Syndrome Coronavirus (MERS-CoV). This highly sensitive, electro- and equipment-free rapid colorimetric visualization method is feasible for resource-limited SFTSV field diagnosis.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제45회 하계 정기학술대회 초록집
• /
• pp.88-89
• /
• 2013

A variety of influenza A viruses from animal hosts are continuously prevalent throughout the world which cause human epidemics resulting millions of human infections and enormous industrial and economic damages. Thus, early diagnosis of such pathogen is of paramount importance for biomedical examination and public healthcare screening. To approach this issue, here we propose a fully integrated Rotary genetic analysis system, called Rotary Genetic Analyzer, for on-site detection of influenza A viruses with high speed. The Rotary Genetic Analyzer is made up of four parts including a disposable microchip, a servo motor for precise and high rate spinning of the chip, thermal blocks for temperature control, and a miniaturized optical fluorescence detector as shown Fig. 1. A thermal block made from duralumin is integrated with a film heater at the bottom and a resistance temperature detector (RTD) in the middle. For the efficient performance of RT-PCR, three thermal blocks are placed on the Rotary stage and the temperature of each block is corresponded to the thermal cycling, namely $95^{\circ}C$ (denature), $58^{\circ}C$ (annealing), and $72^{\circ}C$ (extension). Rotary RT-PCR was performed to amplify the target gene which was monitored by an optical fluorescent detector above the extension block. A disposable microdevice (10 cm diameter) consists of a solid-phase extraction based sample pretreatment unit, bead chamber, and 4 ${\mu}L$ of the PCR chamber as shown Fig. 2. The microchip is fabricated using a patterned polycarbonate (PC) sheet with 1 mm thickness and a PC film with 130 ${\mu}m$ thickness, which layers are thermally bonded at $138^{\circ}C$ using acetone vapour. Silicatreated microglass beads with 150~212 ${\mu}L$ diameter are introduced into the sample pretreatment chambers and held in place by weir structure for construction of solid-phase extraction system. Fig. 3 shows strobed images of sequential loading of three samples. Three samples were loaded into the reservoir simultaneously (Fig. 3A), then the influenza A H3N2 viral RNA sample was loaded at 5000 RPM for 10 sec (Fig. 3B). Washing buffer was followed at 5000 RPM for 5 min (Fig. 3C), and angular frequency was decreased to 100 RPM for siphon priming of PCR cocktail to the channel as shown in Figure 3D. Finally the PCR cocktail was loaded to the bead chamber at 2000 RPM for 10 sec, and then RPM was increased up to 5000 RPM for 1 min to obtain the as much as PCR cocktail containing the RNA template (Fig. 3E). In this system, the wastes from RNA samples and washing buffer were transported to the waste chamber, which is fully filled to the chamber with precise optimization. Then, the PCR cocktail was able to transport to the PCR chamber. Fig. 3F shows the final image of the sample pretreatment. PCR cocktail containing RNA template is successfully isolated from waste. To detect the influenza A H3N2 virus, the purified RNA with PCR cocktail in the PCR chamber was amplified by using performed the RNA capture on the proposed microdevice. The fluorescence images were described in Figure 4A at the 0, 40 cycles. The fluorescence signal (40 cycle) was drastically increased confirming the influenza A H3N2 virus. The real-time profiles were successfully obtained using the optical fluorescence detector as shown in Figure 4B. The Rotary PCR and off-chip PCR were compared with same amount of influenza A H3N2 virus. The Ct value of Rotary PCR was smaller than the off-chip PCR without contamination. The whole process of the sample pretreatment and RT-PCR could be accomplished in 30 min on the fully integrated Rotary Genetic Analyzer system. We have demonstrated a fully integrated and portable Rotary Genetic Analyzer for detection of the gene expression of influenza A virus, which has 'Sample-in-answer-out' capability including sample pretreatment, rotary amplification, and optical detection. Target gene amplification was real-time monitored using the integrated Rotary Genetic Analyzer system.

• Journal of Microbiology and Biotechnology
• /
• 제33권5호
• /
• pp.559-573
• /
• 2023

Shiga toxin (Stxs)-producing enterohaemorrhagic Escherichia coli (EHEC) and Shigella dysenteriae serotype 1 are major causative agents of severe bloody diarrhea (known as hemorrhagic colitis) and hemolytic uremic syndrome (HUS) associated with extraintestinal complications such as acute renal failure and neurologic impairment in infected patients under 9 years of age. Extreme nephrotoxicity of Stxs in HUS patients is associated with severe outcomes, highlighting the need to develop technologies to detect low levels of the toxin in environmental or food samples. Currently, the conventional polymerase chain reaction (PCR) or immunoassay is the most broadly used assay to detect the toxin. However, these assays are laborious, time-consuming, and costly. More recently, numerous studies have described novel, highly sensitive, and portable methods for detecting Stxs from EHEC. To contextualize newly emerging Stxs detection methods, we briefly explain the basic principles of these methods, including lateral flow assays, optical detection, and electrical detection. We subsequently describe existing and newly emerging rapid detection technologies to identify and measure Stxs.

• 산업식품공학
• /
• 제13권4호
• /
• pp.297-301
• /
• 2009

본 연구에서는 딸기의 당도예측모델을 개발하기 위하여 수행하였으며, 딸기의 당도판정에 보다 적합한 조명장치를 설계하기 위해 조명의 영향을 구명하고, 딸기의 당도예측 모델을 개발하였으며, 주요연구 결과는 다음과 같다. 조명방법에 따른 당도 예측 성능을 비교한 결과 4개의 램프로 시료를 직접 조명하는 경우 $r_{SEP}$= 0.603, SEP = 0.502$^{\circ}$Bx으로 나타났으며, 광 화이버로 빛을 유인하여 국부적으로 시료에 점 조명한 경우(광 화이버 3개 사용)에는 $r_{SEP}$= 0.715, SEP = 0.433$^{\circ}$Bx으로서 후자가 더 좋은 성능을 나타내었다. 또한 램프 반사면의 금 코팅 유무에 따른 당도판정 성능시험을 실시한 결과 금 코팅된 할로겐램프를 사용한 경우 $r_{SEP}$= 0.837, SEP = 0.510$^{\circ}$Bx으로서 그렇지 않은 경우의 $r_{SEP}$= 0.756, SEP = 0.580$^{\circ}$Bx보다 양호한 결과가 나타나 금 코팅에 대한 당도판정 효과가 있는 것으로 나타났다. 딸기 당도판정을 위한 최적 회귀모델을 개발하기 위하여 PLSR과 PCR을 이용하였다. 전처리를 하지 않은 경우 $r_{SEP}$= 0.860, SEP=0.498$^{\circ}$Bx로 양호한 결과가 나타났으나, 가장 좋은 결과는 상기에서 언급된 최적의 조명상태에서 측정된 스펙트럼 데이터에 OSC 전처리를 한 경우 $r_{SEP}$= 0.891, SEP = 0.443$^{\circ}$Bx, LV=14로 가장 양호한 결과를 나타내었다. 한편, PCR을 이용한 당도 예측은 전처리를 하지 않은 경우 $r_{SEP}$= 0.845, SEP = 0.520$^{\circ}$Bx, LV=17으로서 DT 전처리에서의 $r_{SEP}$= 0.845, SEP = 0.521$^{\circ}$Bx, LV=17보다 오히려 높게 나타나 전처리에 따른 효과는 없는 것으로 나타났다.