• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.209-215
• /
• 2022

On the Jeju coast, international cruise ships, passenger ships, and other ships pass frequently, as well as many fishing boats. Thus, there is a high risk of marine accidents and frequent ship collisions. Accordingly, it is urgent to establish a coastal VTS for systematic safety management of ships passing through the coastal waters of Jeju. The purpose of this study was to set the area of the VTS to be newly established. In this study, to calculate the workload of the VTS operators, a formula was proposed that reflects the monitoring workload considering the monitoring frequency and required time for target as well as non-target ships and the workload for ship collision situations. The proposed formula was applied to the newly established VTS area in Jeju. Three control sectors were set up in each VTS center. The average number of workstations per hour was approximately 1, so the division between sectors was appropriate. Thus, it was deduced that there would be no workload for the VTS operators. It is expected that the method proposed in this study can be used as primary data for calculating the appropriate number of workstations for the current VTS, and setting the VTS area for a new coastal VTS in the future.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.2
• /
• pp.295-307
• /
• 2021

The Korean Peninsula is surrounded on three sides by the East Sea, West Sea and South Sea which are connected to many rivers and streams, thereby facilitating easy inflow of debris from land. Furthermore, excessive debris inflow to the sea because of active fishing and various recreational activities. Debris entering the sea are weighted over time and settle in the seabed, thus, making direct monitoring of debris impossible and its collection difficult. Uncollected submerged marine debris affects the seabed ecosystem and water quality and can cause ghost fishing and ship accidents, especially due to waste net ropes and waste fishing gears. Therefore, understanding the debris distribution characteristics is necessary to assist quick collection of these debris (waste net ropes and waste fishing gears). Thus, this study conducted a survey of debris deposited in the seas of 39 ports. Furthermore, distribution characteristics and compositions of submerged marine debris were identified by a map prepared through GIS-based spatial analysis of the East Sea. Consequently, 58% of waste tires in the East Sea were concentrated in breakwaters and ship berthing facilities. Moreover, 26 % of waste plastics were distributed outside the port. Identifying the distinct distribution characteristics of submerged marine debris was difficult; however, compared with others, the distribution of waste plastics was possible outside the port. The findings of this study can serve as baseline data to assist the collection of submerged marine debris using the distribution characteristics.

• Journal of Navigation and Port Research
• /
• v.46 no.4
• /
• pp.303-312
• /
• 2022

Bridges across waterways act as interference factors, that reduce the navigable water area from the perspective of navigation safety. To analyze the safety navigational width of ships navigating bridges across waterways, the optimal traffic distribution based on AIS data was investigated, and ships were classified according to size through k-means clustering. As a result of the goodness-of-fit analysis of the clustered data, the lognormal distribution was found to be close to the optimal distribution for Incheon Bridge and Busan Harbor Bridge. Also, the normal distributions for Mokpo Bridge and Machang Bridge were analyzed. Based on the lognormal and normal distribution, the analysis results assumed that the safe passage range of the vessel was 95% of the confidence interval, As a result, regarding the Incheon Bridge, the difference between the normal distribution and the lognormal distribution was the largest, at 64m to 98m. The minimum difference was 10m, which was revealed for Machang Bridge. Accordingly, regarding Incheon Bridge, it was analyzed that it is more appropriate to present a safety width of traffic by assuming a lognormal distribution, rather than suggesting a safety navigation width by assuming a normal distribution. Regarding other bridges, it was analyzed that similar results could be obtained using any of the two distributions, because of the similarity in width between the normal and lognormal distributions. Based on the above results, it is judged that if a safe navigational range is presented, it will contribute to the safe operation of ships as well as the prevention of accidents.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.2
• /
• pp.154-163
• /
• 2015

This study is based on deductions from analysis of historical changes in hydrographic surveys, the problems with the existing system in Korea and analysis of the literature, including foreign cases. Using these criteria, we created and administered a survey of marine professionals of Korea, and based on the results, established an order of priority for hydrographic surveys, as follows: changes in the seabed, quantities of marine traffic, existing performance data from hydrographic survey, consumer's demand, marine accidents, conservation of oceanic environment, and natural resources. The study also deduced, based on a survey of experts, the relative importance ranking of the major ports in South Korea and suggests policy implications and a priority decision model to conduct future hydrographic surveys in a more scientific and systematic way.

• Ocean Systems Engineering
• /
• v.4 no.2
• /
• pp.137-150
• /
• 2014

In the marine industry although there has been significant growth towards safety, security and risk assessments or risk-based strategies such as marine insurance and regulations to avoid the risks of damage to properties and the environment or the prospect of premature death caused by accidents etc, the moves toward managing the risks which are linked directly to the business functions and decision making processes have been very slow. Furthermore in the marine industry most perceptions, methodologies and frameworks of dealing with hazards, risks, safety and security issues are for their assessment rather than their management. This trend reveals the fact that in different marine industry sectors such as logistics and shipping there is a lack of coherent risk management framework or methodology from which to understand the risk-based decisions especially for the purpose of design, construction, operation, management and even decommissioning of the marine related applications. On the other hand risk management is not yet viewed holistically in the marine industry in order to, for example, assign a right person, i.e. risk manager, who can act as a coordinator and advisor with responsibilities that are only specific to risk management. As a result this paper, by examining the present physical borders and risk-based activities in the marine industry, aims to propose an appropriate risk management methodology in addition to the emergent role of risk managers which will enable the industry users initially to become familiar with the concept of risk management at its holistic level. In the later stages this eventually can lead to development of risk management capabilities at an exclusive level and its integration into the marine industry functions in future.

• Journal of the Korean Institute of Navigation
• /
• v.13 no.2
• /
• pp.23-36
• /
• 1989

Marine casualities in the high sea are mainly classified into the breakage of hull and capsize , of which the latter occurs frequently to a small craft and container vessels by extreme rolling. The aim of this study is to develop shiphandling techniques for the prevention of ship's large rolling by way of evaluating dangerous degree of rolling in heavy weather. In this study, rolling motion is analized by using statistical method as follow : (1) 8 sample ships is presented for calculation. (2) Analized sea state are Beaufort scale 7 and 10 (wind velocity 30kts and 50kts respectively) and significant wave height is put as 5.2m and 11.2m. (3) The formula recommended by International Towing Tank Conference (ITTC) is used to calculated the wave spectrum. The results of this study are as follow : The results of this study are as follow : (1) Most of the vessels with beam of 20 meters or less was found to be capized in the waves abeam under the sea condition of Bearfort scale7(30kts). (2) For the vessels range 20m to 30m was found safe under the sea conditions of Bearfort scale 7(30kts) and imminent danger under the sea condition of Beaufort scale 11(50kts). (3) It is proved that any vessel could be capsized by heavy rolling regardless of vessel's size whenever the motion is synchronized with waves abeam. This study concludes that the navigator, especially at night , must anticipate the exact wave direction, referring to the wether report and coastaline, not to lay the vessel in the serial wave abeam.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.1
• /
• pp.13-22
• /
• 2000

The collisions at sea among marine casualties are not reduced as the tonnage and speed of ship's increase as well as the traffic quantity increase at sea, in spite of the improvement of nautical equipment, enforcement of crew's education and training as well as improvement of quality standard according to the implementation of ISM code. The measures to prevent the collisions at sea are simple, and are composed of six stage.: The first stage is that the officer on duty detect the target from his eye or radar information. The second stage is determining the type and kind of target-ship. The third stage is target tracking; calculation of target speed, course, CPA and TCPA from radar information or visual check. The fourth stage is determination of vessel in danger after calculation of third stage. The fifth stage is the judgement of situation if own ship is stand-on or give way vessel according to the 1972 COLREG. The last stage is to carry out proper action according to 1972 COLREG, under the circumstances. But by the case, the situations are so different under the different external conditions; for example, natural/navigational conditions, crew's human factors, ship's particular, rule or regulation, management system on board, the condition of watch keeping. Therefore the reasons and casualties are so complicated. This study aims to investigate the collision casualty at sea which needs to clarity all these causal factors of afore-mentioned, and to analyze the causes of problems so as to utilize them to establish the measures of preventing marine accidents. This study, described the concepts of causal factors into three groups; environmental factor, and company/on board management system and navigator's act. Also described how to investigate and analyzes the casual factors. Even though it was described in this paper how to detect the causal factors and reasons of collisions, and how to analyze the inter-relation of each causal factors, it is necessary to do further study how to analyze between the liability of concerned parties and the casual factors involved.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.6
• /
• pp.783-788
• /
• 2021

Although the Korean government (Ministry of Ocean and Fisheries) and related organizations are enforcing many policies to improve the marine safety of vessels with weak safety management, the effectiveness of each policy is deficient due to the lack of a risk assessment method for ship safety management. Most previous studies in Korea of the risk assessment of ships only dealt with fragmentary risks of individual marine accident risks, so a new assessment method for comprehensive marine accident risk is needed. Examples of comprehensive risk assessments for ship safety management are the selection method for inspection targets by the Port State Control and the Norwegian Maritime Authority. In this study, indicators for the comprehensive risk assessment of ship safety management were developed for and applied to coastal/offshore fishing vessels that occupy a high proportion of the registrations and marine accidents in Korea. As a result, the risk of each ship was confirmed quantitatively, and a ranking of the weakness factors for ship safety management was identified.

• Journal of The Korean Society of Integrative Medicine
• /
• v.6 no.4
• /
• pp.1-13
• /
• 2018

Purpose : The purpose of this study has been performed to find the relationship between seafarers' cumulative fatigue and stress by evaluating autonomic nervous functions and the results of surveys conducted using questionnaires. Methods : The subjects were seafarers working on various ships (home trade ships) of South Korea, who were healthy adults without any diseases, as confirmed through preliminary surveys were recruited through simple random sampling. A device that measures autonomic nervous functions by analyzing heart rate variability, which is also used often in clinical diagnoses and studies at universities, university hospitals, and general hospitals was used to measure the seafarers' cumulative fatigue and stress. Pearson's correlation analyses were also conducted to test the relationship between cumulative fatigue and stress measured by evaluating autonomic nervous functions and the results of surveys conducted with questionnaires. Results : There was no correlation between mean cumulative fatigue measured for each ship type and seafarers position through autonomic nervous functions evaluation and fatigue severity scale (FSS). There also was no correlation between the mean levels of stress measured for each ship type and seafarers position through autonomic nervous functions evaluation and survey scores of Korean occupational stress scale (KOSS). Conclusion : Therefore, in order to prevent man-made accidents in the sea among seafarers working with irregular port entry/departure schedules and under environments involving continued vibration, noises, and shaking, it is necessary to analyzed cumulative fatigue and stress scientifically and objectively, such as through autonomic nervous functions evaluation rather than through surveys.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.6
• /
• pp.439-446
• /
• 2022

Efforts to reduce carbon dioxide(CO₂) emissions are being carried out due to climate environmental problems. Eco-friendly ships are also being developed, and various energy saving measures have been developed and applied. In ships, researches have been conducted in various fields such as electric propulsion system and energy saving devices. In addition, the development of ships using various renewable energy, such as kite using wind power and wind power generation, has been carried out. This paper proposes a plan to use renewable energy for ships by applying wave generators to small ships. In 2016, 130 small domestic ships drifted by sea due to discharge of starting storage batteries, and discharge cases accounted for the largest portion of the causes of domestic ship accidents. This is due to the excessive use of storage batteries for starting the main engine by departing in a weak storage battery state for small ships. Accordingly, two type wave power generators - opened flow wave power generator and enclosed vibrator type wave power generator - are developed for charging a starting storage battery when the ships are stationary at sea or port. Opened flow wave power generator utilizes the flow of fluid in the ship by using wave induced ship motion. Enclosed vibrator type wave power generator utilizes the pendulum kinetic energy located in a ship due to wave induced ship motion.