• Journal of the Korean GEO-environmental Society
• /
• v.9 no.5
• /
• pp.21-27
• /
• 2008

The Sediment deposits in rivers and reservoirs are major components interfering with the useful function of the reservoirs, and clogging the inlet port at water intakes in rivers and erosion of pump impellers. Therefore, an accurate estimation method of sediment deposition is requisite to the efficient water resources investigation, planning and management. The objective of this paper is to forecast of reservoir sediment deposition using two dimensional model (SMS) to UnMun reservoir in GyeongSangBukDo. The RUSLE model showed that reservoirs volume was decreased $2,084.09{\times}10^6m^3$ after 50 years and $2,196.65{\times}10^6m^3$ after 100 years, which is plan flood level elevation (EL.152.12 m) reservoir. The two dimensional model showed that reservoirs volume was decreased $2,227.41{\times}10^6m^3$ after 50 years and $2,121.47{\times}10^6m^3$ after 100 years, which is plan flood level elevation (EL.152.12 m) reservoir. The results of this application showed that the use of two dimensional model was very effective for the estimation sediment deposits throughout the reservoir.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.56 no.5
• /
• pp.67-75
• /
• 2014

In this study, the large-scale hydraulic model test was performed to investigate the hydraulic characteristics for development of the non-power soil cleaning and keeping system at the dike gate. The outlet height, outflow number, outflow discharge, and outflow cycle were compared and analyzed. The non-power soil cleaning and keeping system was most effective at 11.2 mm in the outlet height. And then the mean outflow cycle was 1.09 sec, and the mean outflow discharge was $0.00164m^3/s$. The total outflow number increased gradually as the water level of a water tank increased, and the outlet height decreased. As a level of water tank decreased, the mean outflow cycle was lengthened, and the unit outflow discharge increased. This result showed this system was most effective. To remove the silty clay deposited in facilities, the methods of excavation, dredging, high pressure washing, etc have been applied to the tidal facilities such as land reclamation, a small size fishing port, and a harbor for maintenance. However, this is extremely cost-ineffective, whereas the non-power soil cleaning and keeping system will bring about an enormously positive economic effect. In addition, when the non-power soil cleaning and keeping system is applied to the dike gate of land reclamation, a thorough examination of the local tidal data and the careful system planning are required to prevent the disaster damage caused by flooding.

• Geomechanics and Engineering
• /
• v.30 no.6
• /
• pp.539-549
• /
• 2022

Accidental anchor drop can cause disturbances to seabed materials and pose significant threats to the safety and serviceability of submarine structures such as pipelines. In this study, a series of anchor drop tests was carried out to investigate the penetration mechanism of a Hall anchor in sand and clay. A special anchor drop apparatus was designed to model the inflight drop of a Hall anchor. Results indicate that Coriolis acceleration was the primary cause of large horizontal offsets in sand, and earth gravity had negligible impact on the lateral movement of dropped anchors. The indued final horizontal offset was shown to increase with the elevated drop height of an anchor, and the existence of water can slow down the landing velocity of an anchor. It is also observed that water conditions had a significant effect on the influence zone caused by anchors. The vertical influence depth was over 5 m, and the influence radius was more than 3 m if the anchor had a drop height of 25 m in dry sand. In comparison, the vertical influence depth and radius reduced to less than 3 m and 2 m, respectively, when the anchor was released from 10 m height and fell into the seabed with a water depth of 15 m. It is also found that the dynamically penetrating anchors could significantly influence the earth pressure in clay. There is a non-linear increase in the measured penetration depth with kinematic energy, and the resulted maximum earth pressure increased dramatically with an increase in kinematic energy. Results from centrifuge model tests in this study provide useful insights into the penetration mechanism of a dropped anchor, which provides valuable data for design and planning of future submarine structures.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.8
• /
• pp.61-79
• /
• 2008

Consolidation settlements on marine dredged clays are often greatly and potentially damaging to structures. Currently, large-scale projects are in planning or progressing in Korea. These projects have been performed on thick and soft clay layers. So, the evaluation of consolidation characteristics for dredged and reclaimed ground is very important in design and construction. Therefore, in this study, a series of conventional consolidation tests were performed to investigate the consolidation characteristics of marine dredged clays near Gwang-yang Port. Preconsolidation pressures were evaluated by applying previously proposed 8 methods for the conventional tests results in order to evaluate the legitimacy of these methods. In these methods, when estimating maximum past pressures for dredged and reclaimed ground, it was proved that Becker (1987), Silva (1970), Sridharan (1991)'s methods are excellent in legitimacy.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.10
• /
• pp.267-275
• /
• 2023

The digital transformation of the shipbuilding, shipping, and logistics sectors is predicted to lead to the introduction of autonomous ships and changes in the way ships are operated. The co-existence of various operation forms, such as autonomous operation and remote operation, with the existing operation methods is expected to lead to the transformation of the ship operation process and the emergence of new stakeholders. This paper studies the future ship operation process according to the change in ship operation method, predicts the change in the operating environment of future ships, and derives functional requirements by major tasks and stakeholders. The Delphi technique is applied to construct a ship operation scenario from the planning stage of voyage and cargo transport to the stage of arrival at the final destination port and discharge of cargo, and to predict future work changes by task and actor. Seafarers' activities are expected to be minimised by remote and autonomous operation, and experts in each field are expected to have responsibilities and tasks in different aspects of ship operation.

• Radiation Oncology Journal
• /
• v.20 no.2
• /
• pp.165-171
• /
• 2002

Purpose : In order to perform craniospinal irradiation (CSI) in the supine position on patients who are unable to lie in the prone position, a new simulation technique using a CT simulator was developed and its availability was evaluated. Materials and Method : A CT simulator and a 3-D conformal treatment planning system were used to develop CSI in the supine position. The head and neck were immobilized with a thermoplastic mask in the supine position and the entire body was immobilized with a Vac-Loc. A volumetrie image was then obtained using the CT simulator. In order to improve the reproducibility of the patients' setup, datum lines and points were marked on the head and the body. Virtual fluoroscopy was peformed with the removal of visual obstacles such as the treatment table or the immobilization devices. After the virtual simulation, the treatment isocenters of each field were marked on the body and the immobilization devices at the conventional simulation room. Each treatment field was confirmed by comparing the fluoroscopy images with the digitally reconstructed radiography (DRR)/digitally composite radiography (DCR) images from the virtual simulation. The port verification films from the first treatment were also compared with the DRR/DCR images for a geometrical verification. Results : CSI in the supine position was successfully peformed in 9 patients. It required less than 20 minutes to construct the immobilization device and to obtain the whole body volumetric images. This made it possible to not only reduce the patients' inconvenience, but also to eliminate the position change variables during the long conventional simulation process. In addition, by obtaining the CT volumetric image, critical organs, such as the eyeballs and spinal cord, were better defined, and the accuracy of the port designs and shielding was improved. The differences between the DRRs and the portal films were less than 3 mm in the vertebral contour. Conclusion : CSI in the supine position is feasible in patients who cannot lie on prone position, such as pediatric patienta under the age of 4 years, patients with a poor general condition, or patients with a tracheostomy.

• Journal of Environmental Impact Assessment
• /
• v.17 no.2
• /
• pp.97-103
• /
• 2008

This study presented politic proposals and diverse utilization-type in coastal areas by analyzing results of reviewed related-statements of marine environment during the one year period of 2007 by Marine Environmental Impact Assessment Center. Total of 358 cases were reviewed, which was a significant increase from 270 in 2006. Consultation on the utilization of sea areas (CUSA) accounted for the largest number of 165 (46.1%) and it was followed by 104 cases of environmental impact assessment (EIA) (29.0%) and 89 cases of prior environmental review (PER) (24.9%). As such, evaluation statements (EIA+PER) related to consultations of the Ministry of Environment accounted for approximately 54% of the entire cases reviewed. To analyze the overall results of reviewing marine-related evaluation statements, utilization and planning were conducted by 47.9%, 38.4% and 13.7% in the South Sea, West Sea and East Sea of Korea, respectively. In evaluation statements (EIA+PER), port construction, industrial complex construction, urban management plan and road construction took up most of the part by 40.9%, 20.2%, 10.4% and 7.3%, respectively. In terms of CUSA-statement, it was evaluated that consultations were mostly carried out on use and reclamation of public water surface in coastal areas and on sea aggregate extraction process in EEZ. The largest number of plans for coastal use were established for Jeollanam-do, followed by Gyeongsangnam-do, Chungcheongnam-do, Gyeongsangbuk-do and Gyeonggi-do. In particular, development plans were concentrated on Jeollanam-do and Gyeongsangnam-do with stable marine environment and outstanding view of the nature. In most cases, these regions are adjacent to the areas designated as a sea area for environmental management and fisheries resources protection zone. Therefore, conflicts exist between development and preservation. Also, rather than random development, more detailed marine environmental impact assessment, gathering of public opinions and politic harmony are essentially required. For efficient coastal management and environmentally sound and sustainable development, fulfilling consistent and transparent coastal policies as well as active and reliable decision making to center on coastal environment by management bodies will be important.

• Journal of Wetlands Research
• /
• v.15 no.2
• /
• pp.223-231
• /
• 2013

Excessive precipitation, drought, heat waves, strong typhoons and rising sea levels are just some of the common indicators of climate change. In the Philippines, excessive precipitation never failed to devastate and drown the streets of Metro Manila, a highly urbanized and flood-prone area; such problems are expected to occur frequently. Moreover, the water supply of Metro Manila is dependent only to Angat Reservoir. Rainwater harvesting can serve as an alternative source of raw water and it can mitigate the effects of flooding. The harvested rainwater can be used for: potable consumption if filtered and disinfected; and non-potable consumptions (e.g., irrigation, flushing toilets, carwash, gardening, etc.) if used untreated. The rainfall data were gathered from all 5 rainfall stations located in Metro Manila namely: Science Garden, Port Area, Polo, Nangka and Napindan rain gauge stations. To be able to determine the potential volume of rainwater harvested and the potentiality of rainwater harvesting system as an alternate source of raw water; in this study, three different climatic conditions were considered, the dry, median and wet rainfall years. The frequent occurrence of cyclonic events in the Philippines brought significant amount of rainwater that causes flooding in the highly urbanized region of Metro Manila. Based from the results of this study, the utilization of rainwater harvesting system can serve as an alternative source of non-potable water for the community; and could also reduce the amount of surface runoff that could result to extreme flooding.

• Journal of Distribution Science
• /
• v.11 no.6
• /
• pp.31-40
• /
• 2013

Purpose - The Northeast Asian Logistic Hub strategy was established to create a national competitive advantage in northeast Asia. Countries in this region are competing fiercely to become the central base distribution port as the volume of container shipping continues to increase due to the northeast Asian (especially Chinese) economic growth. The primary method by which shippers are improving their customer service and distribution is enhancing profits by minimizing call ports on the key route through strategic affiliations and the use of large vessels. Each nation is planning large-scale investments in the construction of sea ports that can accommodate large vessels. This paper proposes ways by which the logistical strategies of domestic corporations can keep pace with changes in government policy concerning the Northeast Asian Business Hub policy. It examines the logistics system in the Northeast Asian region, analyzes the government's Northeast Asian Business Hub policy, and suggests logistical strategies for domestic corporations through an analysis based on a questionnaire designed to grasp domestic firms' needs and goals. Research design, data and methodology - The purpose of this study is to determine how shipping companies establish partnerships with third-party logistics providers and draws out the implications of the results. The survey methods used were personal interviews and questionnaires distributed to a sample population through e-mail, fax, mail, and telephone. A total of 600 questionnaires were distributed, of which 165 were returned. Among these, ten were excluded due to insufficient content; ultimately, 155 were used for the sample. The statistical data collection process was analyzed through data coating and a statistical package program. Results - This study argues that greater flexibility in policies, administration, and systems will be needed to significantly improve established business practices. In this dissertation, we primarily identify that in order to become a center of northeast Asian logistics, Korea must adopt a new paradigm and abandon the existing systems that are based on the economic and social systems that have stemmed from bureaucracy, inflexibility, chauvinism, and equalitarianism. Flexible policies, administration, and systems will be necessary to improve business practices. Domestic corporations must establish a strategic logistics hub and related network while simultaneously pursuing value-added logistics businesses by increasing their manpower and building a logistics information system. This will strengthen their competitive edge and lead to system improvements. Conclusions - Domestic corporations must adopt a new paradigm and use more reasonable business laws, systems, and policies that are based on market-driven flexibility and transparency. Moreover, social norms and regulations should be established to help ensure political and social security. Korea must also develop a culture of tolerance for foreign companies. Finally, the paradigm defining the policy governing the development of the capital city and its satellite cities in this context must be changed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.12
• /
• pp.394-399
• /
• 2016

This study examines how the patent results of the University Academic-Industrial Cooperation influence technology transfer. Statistical analysis was performed by using 2013 panel data from the Ministry of Education and Science Technology(MEST) National Research Foundation of Korea(NRF) and the results are as follows. The results show that the patent result factors that have a positive effect on the total number of technology transfers are domestic patent application numbers, foreign patent application numbers, future technology(6T) patent application numbers, science technology patent application numbers. The factors that have a positive effect on increasing royalty are the total number of technology transfers. Domestic patent application numbers, future technology(6T) patent application numbers and science technology patent application numbers have a positive effect on patent results. The results implicate that more research and development is needed for more patents to be applied, that the main focus should be on future technology(6T) and science technology fields, and that effort should be directed at planning negotiation strategies for the term of the contract. However, this study is the need to research, including primary research is so patent performance may be limited in having only been considered in future studies of human and material resources and operating system factors that may be presented to the essential elements of the Industry-Academic Cooperation Foundation this raises.