• Transactions of the Korean Society of Automotive Engineers
• /
• v.2 no.5
• /
• pp.66-73
• /
• 1994

The configuration effects of a tumble adaptor which transforms tumble into swirl on the intake tumble characterization under steady flow condition have been investigated by LDV measurement The following parameters were involved to test their effects on tumble-swirl conversion characteristics ; the cylinder height and its bottom shape, measuring position in the swirl induction pipe, and the relative direction of the induction pipe. The short cylinder height and the flat bottom of the tumble adaptor were found effective for the generation of tumble in the cylinder, allowing higher tumble-swirl conversion efficiency.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.6
• /
• pp.70-77
• /
• 1994

A low noise erbium doped fiber amplifier for optical preamplification has been demonstrated. The amplifier incoporates an optical isolator in its midway to prevent decrease of population inversion at the input port due to backward traveling amplified spontaneous emission. Then, high gain and low noise can be achieved simultaneously. A small signal gain of 34dB and a noise figure of 5.5dB have been achieved. With this amplifier, we obtained a receiver sensitivity of -39.7dBm with back to back configuration and -39.3dBm with 47km normal fiber for 10$^{-9}$BER at 2.5Gbps direct modulated optical signal.

• Journal of the Korean Institute of Navigation
• /
• v.8 no.2
• /
• pp.71-80
• /
• 1984

선박의 운동특성은 선형과 밀접한 관계를 갖는다. 여러 가지 운동특성중에서 선박의 조종과 특별히 관계가 깊은 것은 침로안정성이다. 이 특성은 선박설계에 있어서 대단히 중요하지만 선박조종에서는 한 선박을 조선하는데 사전에 필히 알아두어야 할 사항이다. 본 논문의 목적은 조선자들에게 선형에 따라서 생기는 침로안정성을 명백히 알림으로써 선박의 안정운항을 도모하는데 있다. 최근 미국, 일본, 유럽등의 나라에서 많은 학자들이 이러한 운동특성을 많이 연구하여 오고 있으나 그들의 연구는 操船을 위한 것이 아니고 造船을 위한 경우가 대부분이다. 필자는 척형조형의 대표적인 model과 비대형선형의 대표적 model을 골라서 이들의 동적인 침로안정성을 계산하였다. 그 결과 비대형선박은 조형에서 유래하는 침로불안정성이 있음을 명백히 알 수 있었다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.11
• /
• pp.152-156
• /
• 1990

Making use of APF(All Pass Filter), four kinds of digital CGIC(Current-coversion Generalized Immittance Coverter) configurations have been realized, which have independent port conductances respectively. By according to hardware requirements and quantization noises generated at CGIC output due to the roundoff of the multiplier, thier performances have been compared with one another and their application method is illustrated.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.03a
• /
• pp.550-559
• /
• 2004

Theoretical studies have been carried out to examine the influence of the grain geometry-dependent driving forces, which control the internal flow pattern of solid rockets. Numerical studies have been executed with the help of a two-dimensional code. This code solves standard k-omega turbulence equations using the coupled second order implicit unsteady formulation. It has been concluded that the grain port divergence angles have significant leverage on the formation of recirculation bubbles leading for pressure oscillations, flow separation and reattachment. In solid rockets flow reattachment will favour secondary ignition and that will add to the complexity of the starting transient prediction.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.201-207
• /
• 1999

The fiber-optical confocal scanning interference microscope with a simple configuration was constructed with a 4-port fiber-optic coupler, and the new method based on the phase shifting method was proposed for surface profiling by the system. In the method, the height of a specimen was determined from the phase of confocal beam. It was verified experimentally that the method was applicable to even the confocal interference microscope with a long-wavelength source and a low NA objective, and that the scanning time could be drastically reduced compared with the conventional method. Finally, it was found that our method is less sensitive to the variation of surface reflectivity than the conventional method.

• Korean Journal of Optics and Photonics
• /
• v.10 no.3
• /
• pp.233-236
• /
• 1999

We have constructed a narrow-linewidth single-longitudinal-mode unidirectional $Er^{3+}$ -doped fiber laser using a fiber Bragg grating incorporated by a three port optical circulator with a compact configuration. Using a conventional delayed self-heterodyne detection technique with Mach-Zehnder interferometer a linewidth of 5 kHz was measured. In a single-longitudinal-mode operation, output power of up to 2.7 mW at 1548 nm were obtained for a launched pump power of 43 mW at 980 nm.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.11a
• /
• pp.275-278
• /
• 2003

The aim of the study is to scrutinize the relationship between the area of resonance and center frequency with varying thickness by analyzing the characteristics of 2-port resonator. This was done through ideal design using Leach model equivalent model modified Mason model equivalent circuit for the application of bandpass filter high-frequency band with resonator Moreover, through the design of ladder-type BPF, we were able to observe changes in bandwidth, resonation, out-of-band rejection depending on the number and area of resonator.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.22 no.2
• /
• pp.174-177
• /
• 2009

In this paper, an oscillator using dielectric-rod loaded cavity resonators with HTS(High Temperature Superconductor) end-plates was presented. It was operated at X-band. A two port cavity resonator was incorporated into a basic feedback loop oscillator configuration. A rutile loaded cavity resonator with HTS thin film end-plates was used to provide the quality factor between $10^4$ and $10^6$. A parallel feedback oscillator was constructed with a dielectric loaded cavity resonator, an amplifier, and a directional coupler. At 300 K, the experimental results showed the phase noise of -108 dBc/Hz at a 100 kHz offset frequency. At 26 K, the results was -118.8 dBc/Hz at same offset frequency.

• Journal of Navigation and Port Research
• /
• v.48 no.4
• /
• pp.274-283
• /
• 2024

Climate change is currently one of the most pressing environmental issues, primarily caused by carbon emissions from fossil fuel usage. As a result, alternative fuels that effectively reduce carbon emissions are garnering more attention. Among these alternatives, hydrogen has numerous advantages, such as its ability for large-scale storage and transport. However, it is crucial to prioritize safety measures, particularly in facilities that handle hydrogen, due to its highly flammable and fast-spreading nature. This study aims to compare and analyze the placement of supply and exhaust vents to efficiently release hydrogen in the event of a leak in an enclosed space. The experiments involved six different scenarios, each with various combinations of supply and exhaust vents. To ensure the experimental process's safety, helium, which shares similar physical properties with hydrogen, was used to analyze the internal oxygen concentration during ventilation system operations. The results revealed that among the six scenarios, Case 2, which employed a lower side supply vent and an upper side exhaust vent, exhibited the shortest ventilation time of 4 minutes and 30 seconds. Additionally, the decrease rate in oxygen concentration was examined in the upper, middle, and lower areas. Ventilation utilizing an upper surface supply vent and two exhaust vents on the upper surface and upper side (Case 6), showed lower oxygen concentration values in the upper area, while Case 2 yielded lower values in the middle and lower areas. Therefore, it is crucial to select an appropriate supply and exhaust vent configuration considering the space's characteristics and usage environment.