• 제목/요약/키워드: Port Components

검색결과 232건 처리시간 0.026초

Estimation of Ionospheric Delays in Dual Frequency Positioning - Future Possibility of Using Pseudo Range Measurements -

  • Isshiki, Hiroshi
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
    • /
    • pp.185-190
    • /
    • 2006
  • The correct estimation of the ionospheric delays is very important for the precise kinematic positioning especially in case of the long baseline. In case of triple frequency system, the ionospheric delays can be estimated from the measurements, but, in case of dual frequency system, the situation is not so simple. The precision of those supplied by the external information source such as IONEX is not sufficient. The high frequency component is neglected, and the precision of the low frequency component is not sufficient for the long baseline positioning. On the other hand, the high frequency component can be estimated from the phase range measurements. If the low frequency components are estimated by using the external information source or pseudo range measurements, a more reasonable estimation of the ionospheric delays may be possible. It has already been discussed by the author that the estimation of the low frequency components by using the external information source is not sufficient but fairly effective. The estimation using the pseudo range measurements is discussed in the present paper. The accuracy is not sufficient at present because of the errors in the pseudo range measurements. It is clarified that the bias errors in the pseudo range measurements are responsible for the poor accuracy of the ionospheric delays. However, if the accuracy of the pseudo range measurements is improved in future, the method would become very promising.

  • PDF

해상교통 안전관리시스템(CITS)구축을 위한 연계기술 표준화 방안 연구 (A Study on Standardization of Interfacing Technology between Components of Coastal Intelligent Transport System)

  • 정민;송재욱;예병덕;박진수;이윤석;박영수
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2005년도 추계학술대회 논문집
    • /
    • pp.31-36
    • /
    • 2005
  • 본 연구는 해양수산부와 해양경찰청 둥에서 관리$\cdot$운영되고 있는 해상교통안전관리체계와 첨단 정보통신기술을 이용하여 차세대 지능통합형 해상교통안전관리시스템을 구축하기 위해 필요한 기반 기술에 관한 것으로서, 해상에서의 선박교통통항 안전성을 극대화하기 위한 시스템의 필요 구성요소, 구성요소의 기능 및 기술규격 그리고 구성요소간의 연계기술 등의 표준화 방안을 구체적으로 제시하였다.

  • PDF

선박 무선통신 응용을 위한 초소형 RF 소자에 관한 연구 (Study on Miniaturized RF Components for Application to Ship Radio Communication)

  • 윤영
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2022년도 추계학술대회
    • /
    • pp.390-391
    • /
    • 2022
  • 최근 미국에서는 민간 우주개발업체인 스페이스 x가 스타링크 사업을 통해 저궤도 위성을 발사할 계획이며, 현재까지는 900여개의 위성을 발사하였다. 구체적으로는 Ku 대역과 ka 대역을 갖는 위성을 운용할 계획이며 광대역 신호의 전송을 위해 V 대역을 갖는 7518개 위성을 고도 340 km에 발사할 계획이다. 따라서, 운항중인 선박에서도 저궤도 위성을 통한 무선통신이 가능하게 되며, 다양한 솔루션이 제공될 계획이다. 본 연구에서는 3차원 결합구조를 가지는 코프레너 선로 구조에 대한 RF 특성을 연구하였으며, 이를 통해 완전집적형 해양무선통신 반도체 SoC (System on Chip)를 구현하기 위한 RF소자의 개발가능성을 검토하였다.

  • PDF

어항투자사업의 경제성 평가에 관한 연구 (The Study on the Economic Appraisal of Fishing Port Investments)

  • 정형찬
    • 수산경영론집
    • /
    • 제14권2호
    • /
    • pp.15-68
    • /
    • 1983
  • From the economic point of view the fishing port is the complex of installations on land, organized to serve the fishing fleet and its cargo, and is the main link in the production chain of all components of the fishing industry, with the aim of achieving the planned targets with the minimum cost. Fishing port investment decisions have had significant impact on the development aims of Korean fisheries. Fishing port investments in Korea are made mostly by public or semipublic port authorities. Such investments should be judged not purely on the basis of financial profitability but rather on the extent to which they serve the development aims of the fishing industry. This makes the economic appraisal process more complex and presents certain problems in correctly quantifying the economic costs and benefits of the fishing port projects. This study concentrates more on the theoretical economic appraisal models than on the purely financial aspects of fishing port investments and points out the difference between the two approaches. In the result, there is clearly an element of judgment as to whether or not a shadow price needs to be used in estimating economic benefits and costs. From this viewpoint, some attempts are made to provide definitions of the possible economic benefits and costs, and methods for estimating and evaluating them in Part III and IV. Especially queueing theory is applied in the calculation of economic benefits. When a project is contemplated and analysis shows it to Lave a positive NPV, one question that arises is whether it should be implemented now or delayed. In this paper, the first year rate of return method is regarded as a more concise way of solving the timing of investment, At the end of Part IV, risk analysis of fishing port investments is considered. It can be handled in a number of ways, ranging from informal judgment to complex statistical analyses involving large-scale computer models, This paper recommends that evaluators of fishing port investments use the sensitivity analysis indicating exactly how much NPV will change in response to a given change in an input variable, other things held constant. Decisions regarding the amount of capacity to provide must be made in fishing port investments. Providing too much service would involve excessive capital costs. On the other hand, not providing enough service capacity would cause the waiting line of fishing vessels to become excessively long at times. Therefore, in Part V, the optimal number of berths and berth productivity in fishing port are defined as follows: Minimize E(TC) = E(WC)+E(SC) The minimum of this function is the solution and that is the optimal number of berth and berth productivity in fishing port.

  • PDF

항만물류산업의 총요소생산성과 그 분해요인분석 (Total Factor Productivity Growth and the Decomposition Components of Korean Port-Logistics Industry)

  • 강상목;이주병
    • 한국항만경제학회지
    • /
    • 제24권4호
    • /
    • pp.47-70
    • /
    • 2008
  • 본 연구의 목적은 확률적 생산변경함수를 이용하여 총요소생산성 성장을 도출하고 그 내부요소를 기술효율성 변화, 기술진보, 규모효율변화, 배분적 효율변화로 구분하여 생산성 성장의 요인을 파악해 보고자 함이다. 1990-2003년간 항만물류산업의 총요소생산성 증가율은 연간 0.019 (1.9%)로서 전산업의 증가율 0.010보다 높다. 그 내부의 주된 기여요인은 기술진보이고 기술효율성변화는 감소하였다. 총요소생산성의 주된 기여요인으로는 항만산업은 배분효율성, 해운산업은 기술진보, 수송장비산업은 규모효율변화를 들 수 있다. 총요소생산성 변화는 1990년대 후반이후에 감소하는 추이를 보였다. 항만물류산업은 전산업에 비하여 매우 낮은 수준의 기술효율성수준을 보여주고 있고 산출탄력성 관점에서는 1990-2003년간 자본의 탄력성(0.391)이 노동의 탄력성(0.227)보다 높지만 규모에 대한 보수는 0.618로서 최적규모에 상당히 벗어나 있다.

  • PDF

항만 터미널 내 차량의 효율적 풀링을 위한 실시간 위치 측정 시스템 설계 및 구현 (Design and Implementation of Real Time Locating System for Efficient Vehicle Pooling in Port Terminal)

  • 손상현;조현태;백윤주
    • 한국정보통신학회논문지
    • /
    • 제16권9호
    • /
    • pp.2056-2063
    • /
    • 2012
  • 항만 터미널 내에서 컨테이너의 이동을 위해 야드 트랙터와 크레인 차량을 이용한다. 차량의 빠른 배치를 통한 효율적인 처리를 위해 차량의 위치정보가 중요한 요소로 떠오르고 있다. 현재 대부분의 항만 터미널에서 차량의 위치 정보는 해당 차량이 마지막으로 발생시킨 이벤트를 기반으로 하여 추정하나 차량이 발생시키는 이벤트는 발생 빈도가 낮으며 추정하는 위치 오차가 크게 발생하는 문제가 있다. 본 논문에서는 이러한 문제를 극복하기 위해 차량의 위치를 측정하기 위한 무선 통신 기반 실시간 위치 측정 시스템을 제안한다. 항만 터미널 환경은 컨테이너의 적재로 위치 측정 오차가 크게 발생한다. 이를 해결하기 위해 항만환경에 적합한 하드웨어를 설계 및 구현하고 항만 터미널의 추가적인 문제를 해결한 향상된 다단계 위치 측정 기법을 적용하여 위치 정보의 정확도를 향상시켰다. 제안하는 시스템을 현대 부산 신항만 터미널(HPNT)에서 측정 정밀도를 테스트한 결과 CEP 기준으로 평균 5.87 미터 오차수준의 정확도를 확인하였다.

프로판 엔진의 배기 포트에서 탄화수소 산화율 추정 (Estimation of Hydrocarbon Oxidation by Measuring He Concentrations in an SI Engine Exhaust Port)

  • 이형승;박종범;민경덕;김응서
    • 대한기계학회논문집B
    • /
    • 제24권5호
    • /
    • pp.660-667
    • /
    • 2000
  • In order to investigate the exhaust structure and secondary oxidation of unburned hydrocarbon (HC) in the exhaust port, concentrations of individual HC species were measured in exhaust process, the degree of oxidation were obtained. Using a solenoid-driven fast sampling system on single-cylinder research engine fueled with 94% propane, the profiles of unburned hydrocarbons (HCs) and non-fuel HCs with a propane fueled engine were obtained from several locations in the exhaust port during the exhaust process. The sampled gases were analyzed using a gas chromatography of HC species with 4 or lesser carbon atoms. The change of total HC concentration and HC fractions of major components through the exhaust port were discussed. The results showed that non-uniform distribution of HC concentration existed around the exhaust valve and changed with time, and that the exhaust gas exhibited nearly uniform concentration profile at port exit, which was due to mixing and oxidation. Also it could be known that bulk gas with relatively high HC concentration came out through the bottom of the exhaust valve. To estimate the mass-based degree of HC oxidation in the exhaust port from measured HC concentrations, a 3-zone diagnostic cycle simulation and plug flow modeling were used. The degree of oxidation ranged between 26 % and 36 % corresponding to the engine operation conditions.

유럽지역 컨테이너항만의 체계적 분류에 관한 연구 (Systematic Classification of Container Ports in European Union Countries)

  • 여기태
    • 한국지역지리학회지
    • /
    • 제12권3호
    • /
    • pp.382-391
    • /
    • 2006
  • 본 연구는 경쟁 및 협력현상을 중심으로 항만을 체계적으로 분류하는 방법 및 모델을 제시하기 위하여 유럽지역 21개 항만들을 대상으로 분석을 수행하였다. 그 결과, 대상지역 21개 주요 항만은 총 6가지의 독자적인 위상을 갖는 항만군으로 분류됨을 확인하였다. 가장 경쟁에서 우위를 점하는 항만은 네덜란드의 로테르담항만이 차지하였으며, 이를 근접한 위치에서 추격하는 항만군은 함부르그와 엔트워프항만이 속한 B 군집으로 확인되었다. 이상의 상위 항만군과 경쟁의 관계를 갖고 있지 않으나, 협력전략이 필요한 항만군으로는 A군집 6개 항만과 E군집 4개 항만이 도출되었다. 또한, 항만의 보다 나은 서비스를 위하여 다양한 전략이 요청되는 항만군은 D군집 6개 항만과 F군집 2개 항만으로 제시되었다. 한편, 방법론을 통하여 제시된 각 군집내의 항만의 소속 정도을 통하여 향후 변화가능성, 성장가능성 등도 파악할 수 있어 향후 연구대상지역의 항만들을 분류하고 분석하는 문제에 매우 유용한 시사점을 제공하였다.

  • PDF

기업특성에 따른 물류비 구성요소에 관한 연구 (A Study on the Enterprise Characteristics and Component Factors of Logistics Cost)

  • 서선애
    • 한국항만경제학회지
    • /
    • 제24권4호
    • /
    • pp.219-236
    • /
    • 2008
  • 물류비에 관한 연구는 물류비를 구성하고 있는 요소들의 복잡성만큼 물류비를 산출하고, 특성을 분석하는 것에 많은 노력이 요구된다. 이러한 이유로 물류비 산출은 정부차원의 조사에서 많이 이루어지고 있다. 그러나 아직까지 물류비의 산출기준이 명확하지 않고 또한 물류비 항목별 비율을 조사하는데도 많은 시간과 비용이 소요되는 게 사실이다. SCM 주체의 확대에 따라 물류비를 결정하는 요인들 또한 다양해 졌으며, 기업환경의 변화로 인해 물류비 영향요인들의 변화가 있어왔다. 따라서 물류비에 대한 연구는 물류비를 구성하고 있는 요소들의 세분화와 이들의 특성을 구분하여 접근해야 한다. 물류비의 구성요소는 그 기업이 처해있는 상황이나 여건에 의해 이를 구성하는 요소들이 달라질 수 있거나 요소들의 특성이 구분되기 때문이다. 이러한 특성의 분석과 원인에 대한 분석 없이 무조건적으로 수송비나 보관비와 같은 요소절약 전략은 기업의 특성에 맞지 않는 대안이 될 수 있기 때문이다. 따라서 본 연구에서는 물류비 구성요소별 특성 분석을 바탕으로 하여 물류비 산정과 물류비 절감 노력에 기초적으로 가정하고 고려해야 하는 부분들에 대한 연구에 목적을 둔다.

  • PDF

Experimental Investigation of the Motion Responses of a Moored Twin-Barge Model in Regular Waves in a Square Tank

  • Nguyen, Van Minh;Jeon, Myung-Jun;Yoon, Hyeon-Kyu
    • 한국항해항만학회지
    • /
    • 제42권2호
    • /
    • pp.127-136
    • /
    • 2018
  • The motion response of floating structures is of significant concern in marine engineering. Floating structures can be disturbed by waves, winds, and currents that create undesirable motions of the vessel, therefore causing challenges to its operation. For a floating structure, mooring lines are provided in order to maintain its position; these should also produce a restoring force when the vessel is displaced. Therefore, it is important to investigate the tension of mooring lines and the motion responses of a twin barge when moored to guarantee the safety of the barge during its operation. It is essential to precisely identify the characteristics of the motion responses of a moored barge under different loading conditions. In this study, the motion responses of a moored twin barge were measured in regular waves of seven different wave directions. The experiment was performed with regular waves with different wavelengths and wave directions in order to estimate the twin-barge motions and the tension of the mooring line. In addition, the motion components of roll, pitch, and heave are completely free. In contrast, the surge, sway, and yaw components are fixed. In the succeeding step, a time-domain analysis is carried out in order to obtain the responses of the structure when moored. As a result, the Response Amplitude Operator (RAO) motion value was estimated for different wave directions. The results of the experiment show that the motion components of the twin barge have a significant effect on the tension of the mooring lines.