• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1016-1021
• /
• 2003

The overall size of electronic product is becoming small according to development of technology. Accordingly it is difficult to inspect these small components by human eyes. So, an automation system for inspecting them has been used. The existing system put microprocessor or Programmable Logic Controller (PLC) use. The structure of microprocessor-based controller and PLC use basically composed of memory devices such as ROM, RAM and I/O ports. Accordingly, the system is not only becomes complicated and enlarged but also higher price. In this paper, we implement FPGA-based One-chip Programmable Timing Controller for Inspecting Small components to resolve above problems and design the high performance controller by using VHDL. With fast development, the FPGA of high capacity that can have memory and PLL have been introduced. By using the high-capacity FPGA, the peripherals of the existent controller, such as memory, I/O ports can be implemented in one FPGA. By doing this, because the complicated system can be simplified, the noise and power dissipation problems can be minimized and it can have the advantage in price. Since the proposed controller is organized to have internal register, counter, and software routines for generating timing signals, users do not have to problem the details about timing signals and need to only send some values about an inspection system through an RS232C port. By selecting theses values appropriate for a given inspection system, desired timing signals can be generated.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.8-8
• /
• 2000

PICARD (Port-Interface Component Architecture for Real-time system Design) is a software architecture and environment, which is aimed to reduce development time and cost of real-time, control system. With PICARD, a control engineer can construct a control system software by assembling pre-built software components us ing interact ive graphical development environment. PICARD consists of PVM(Picard Virtual Machine) , a component library, and PICE(PIcard Configuration Editor). PVM is a real-time engine of the PICARD system which runs control tasks on a real-time operating system. The component library is composed of components which are called task blocks. PICE is a visual editor which can configure control tasks by creating data-flow diagrams of task blocks or Ladder diagrams for sequential logics. For the communication between PVM on a target system and PICE on a host computer, a simple protocol and tools for stub generation was dove]oped because RPC or CORBA is difficult to be applied for the embedded system. New features such as a byte-code based run time system and a simple and easy MMI builder are also introduced.

• Journal of Environmental Science International
• /
• v.24 no.8
• /
• pp.1075-1084
• /
• 2015

This study was conducted to investigated the changes in the nutrient components ($NO_3{^-}-N$, $NH_4{^+}-N$, $PO_4{^{3-}}P$, $K^+$, $Ca^{2+}$, and $Mg^{2+}$) and environmental parameters (electrical conductivity, total dissolved solids and pH) on the leaf lettuce (Lactuca sativa L.) grown with hydroponics. Recirculating hydroponic cultivation system was consisted of planting port, LED lamp, water tank, and circulating pump for hydroponic. Nutrient solution was used in the standard solution for Japan vegetables experimental station and commercial hydroponic. The result showed that electrical conductivity (EC), total dissolved solids (TDS) and pH, depending on the growth of lettuce decreased continuously. With the growth of the lettuce, nitrate nitrogen, ammonia nitrogen, phosphate phosphorus were required for periodic replacement. The number of pH compensation due to the growth of lettuce are the most high. The concentration of $Ca^{2+}$ and $Mg^{2+}$ during the lettuce growth showed no significant change. However, $K^+$ concentration increased due to the replacement with nitrogen and phosphorus. Electric conductivity and total dissolved solids with total nutrient concentration showed the linear relationship and the correlation coefficient $R^2$ were 0.8601 and the 0.827, respectively.

• Corrosion Science and Technology
• /
• v.22 no.4
• /
• pp.265-272
• /
• 2023

The aim of this study was to develop a new in-situ observation method and instrument in micro-scale to investigate the mechanism of stress corrosion cracking (SCC) initiation of Ni-base alloys in a high temperature water environment of pressurized water reactors (PWRs). A laser confocal microscope (LCM), an autoclave with diamond window view port, and a slow strain-rate tester with primary water circulation loop system were components of the instrument. Diamond window, one of the core components of the instrument, was selected based on its optical, chemical, and mechanical properties. LCM was used to observe the specimen in micro-scale, considering the experimental condition of a high-temperature primary water environment. Using in-situ method and instrument, it is possible to observe oxidation and deformation of specimen surface in micro-scale through the diamond window in a high-temperature primary water in real-time. The in-situ method and instrument developed in this work can be utilized to investigate effects of various factors on SCC initiation in a high-temperature water environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.10a
• /
• pp.300-302
• /
• 2021

Usage of a face mask has become mandatory in many countries after the COVID-19. This paper described to develop a IoT based smart mask system for monitoring face mask. The system developed in this paper has two main units, a sensor module, and a smartphone application. The sensor module consists of four components: temperature and humidity sensor, a heart rate sensor, and a BLE chip. This components work as a unit to collect data and stream them through an I2C port over BLE to a connected mobile device. The smartphone application is an Android application developed for smart phones. It enables the Android device to communicate with the sensor to receive sensor data, process, store and display results.

• Journal of Navigation and Port Research
• /
• v.41 no.6
• /
• pp.415-422
• /
• 2017

In a situation where there is excessive competition among logistics centers due to the low price of logistics centers for attracting freight volume, the conditions provided by the logistics centers are similar. Therefore, in order to determine the logistics center, we want to find out what kind of differentiated service the shippers desire, as well as what level of service they want in addition to al ow price. There are currently no studies about the service quality of logistics centers. The components of the service quality of the logistics center were extracted by applying them to the logistics center based on the existing service quality theory. Factor analysis revealed five dimensions of service quality: tangibility, reliability, empathy, assurance, and know-how. It was found that service quality had a statistically significant influence on customer satisfaction, from the investigation of the causal effect relationship. In addition, 'Know-How' among these factors has more influence on customer satisfaction, so it is important to accumulate differentiated 'Know-How' only in logistics centers.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.2
• /
• pp.153-161
• /
• 2016

This paper proposes a bridge model for data exchange and service invocation between OPRoS and ROS platforms, shows the validity of the proposed model via applications, and compares the proposed model with the OPRoS platform and the ROS platform using performance measures such as data exchange time and service response time. The proposed model operates independently of OPRoS and ROS Platforms using its configuration file with mapping information among the OPRoS data/service port and the ROS topic/service. The configuration file makes easy connections between OPRoS data/service and ROS topic/service without changing the source code of the platform and components.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.5
• /
• pp.435-441
• /
• 2000

This paper deals with the development of RACOM(Radar Signal Detecting ＆ Processing Computer). RACOM is a radar display system specially designed for radar scan conversion, signal processing and PCI radar image display. RACOM contains two components； i )RSP(Radar Signal Processor) board which is a PCI based board for receiving video, trigger, heading & bearing signals from radar scanner ＆ tranceiver units and processing these signals to generate high resolution radar image, and ⅱ）Applications which perform ordinary radar display functions such as EBL, VRM and so on. Since RACOM is designed to meet a wide variety of specifications(type of output signal from tranceiver unit), to record radar images and to distribute those images in real time to everywhere in a networked environment, it can be applicable to AIS(Automatic Identification System) and VDR(Voyage Data Recorder).

• Journal of the Korean Institute of Navigation
• /
• v.21 no.1
• /
• pp.119-128
• /
• 1997

Nowadays, many satellites regularly produce digital multispectral images of the earth's surface. Multispectral images may be displayed as color pictures by selecting three components for assignment to the primary colors. It is desired to enhance these images to generate a display picture that are representativde of their features. in this paper, a false color image processing algorithm is proposed for the purpose of enchancement of the multispectral images based on the human perception. The mean of each primary component is transformed to equalo. Intensity and saturation are enhanced by modified piecewise linear contrast strectching and saturation enhancement method. The proposed method has been successfully applied the LANDSAT TM image and shows good enhancement.

• Structural Engineering and Mechanics
• /
• v.18 no.5
• /
• pp.609-626
• /
• 2004

The Land Transport Authority of Singapore has a continuing program of highway bridge upgrading, to refurbish and strengthen bridges to allow for increasing vehicle traffic and increasing axle loads. One subject of this program has been a short span bridge taking a busy highway across a coastal inlet near a major port facility. Experiment-based structural assessments of the bridge were conducted before and after upgrading works including strengthening. Each assessment exercise comprised two separate components; a strain and acceleration monitoring exercise lasting approximately one month, and a full-scale dynamic test carried out in a single day. This paper reports the application of extreme value statistics to estimate bridge live loads using strain measurements.