• Journal of the Korean Institute of Navigation
• /
• v.24 no.4
• /
• pp.299-312
• /
• 2000

Because shore(ship) to ship(shore) communication service via INMARSAT pay expensive cost, satellite service typically use two stage service that land users dial up LES(Land Earth Station) for sending or receiving message. In order to send and receive message, land users must maintain online state with LES on dedicated line. Also, two stage INMARSAT communication service must consume long time that processes step by step. In case of large company, they have own communication system, but small companys communicate simple messages with only telex. This paper describes the design and implementation of an integrated communication services via INMARSAT-C. This system uses inexpensive INMARSAT-C for transmission between ship and land. Because this system provides web and E-Mail interface, users send and receive messages easily and quickly. This system provides most users with inexpensive and easy communication facilities between ship and land.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.521-523
• /
• 2010

Reseatch and Analysis on the DGPS radiobeacon propagation measurement of Domestic ferry lines Starting with maritime DGPS Base stations of Palmido, Ochongdo which have been operated since 1999, truly our nation has become the most powerful country possessed with total of 17 DGNSS base stations in the field of DGNSS operation infrastructure. This paper intents to consider the development direction of the country's DGNSS services as identifying the services range of the maritime DGPS base stations in the south coast domestic ferry lines which sections are Busan$\rightarrow$Jeju, Jeju$\rightarrow$Nokdong.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.9
• /
• pp.1939-1946
• /
• 2012

USNs (Ubiquitous Sensor Networks) such as IEEE 802.15.4 ZigBee network share ISM (Industrial, Scientific, and Medical) frequency band with WiFi networks. Once both networks operate in a region, packet collision may happen because of frequency overlapping. To assure this possibility, we conducted experiments where WiFi and ZigBee communication networks had been installed in an area. As a result of the test, successful data transmission rate were reduced due to the frequency overlapping between a WiFi communication channel and a ZigBee communication band. To cope with this problem, we propose a collision avoidance algorithm. In the proposed algorithm, if frequency collision is sensed, new communication channel with different frequency band is allocated to each node. Performance of the proposed frequency collision avoidance algorithm was tested and the results were described.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.10
• /
• pp.1999-2007
• /
• 2017

In this paper, we implement a multi-band network selection (MNS) system based on Linux operating system which determines the optimal communication link for given network conditions among the available LTE, very high frequency (VHF), and high frequency (HF). The implemented software consists of a network interface, an MNS server, and a user GUI. We perform indoor test to verify the function of the implemented MNS system using two sets of MNS system. To this end, two types of VHF communication links that follow ITU-R M.1842-1 Annex 1 and Annex 4 are emulated in software. In addition, the HF transmission (reception) port of one MNS is directly connected to the HF reception (transmission) port of another MNS. We demonstrate through indoor tests that the implemented MNS system can support seamless maritime communication service in spite of artificial disconnection or re-connection of LTE, VHFs, and HF. The implemented MNS system is applicable to various maritime communication services including e-navigation.

• Journal of Navigation and Port Research
• /
• v.36 no.5
• /
• pp.371-378
• /
• 2012

This paper presents a timing recovery method using Gardner TED (Timing Error Detector) with a Peak Detector using Parabola Peak Interpolation in underwater acoustic communication. This method will have an eye to improve phase converge speed of timing recovery and reduced amount of Tx data. The OQPSK(Offset Quadrature Phase Shift Keying) modulation technique was considered. The proposed algorithm has faster recovery speed and more accurate than Gardner TED because the sampling values in the proposed algorithm are moved persistingly to maximum or minimum point using parabolic peak interpolation. when simulation performed using Preposed method, it improved BER (Bit Error Rate) performance about 23% And to evaluate the performances of the proposed algorithm the sea trial was performed in the Korean East Sea. And distance of a transmitter-receiver is 3 km each other. As a result, the proposed algorithm outperforms better BER performance about 20% of timing recovery than the Gardner method. Also Proposed method improved converge speed of timing recovery about 1.4 times better than Gardner method.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.37 no.1
• /
• pp.50-57
• /
• 2000

By supporting wireless communication technology, there is gradually expansion of the commercial application for Wireless Local Loop(WLL) technology, which is to replace existing telephone line with wireless one. The WLL system application helps a operator to have merits of the installation and maintenance of line and also a subscriber to make a high speed value-added service. As mentioned above reasons for both sides, many manufactories and operators are concerned with development and application respectively. This paper presents hardware implementation of Radio Port Controller(RPC) and also describes the system configuration, functions, and Inter Processor Communication(IPC) structure of RPC. We performed inter-module communication test via IPC backplane bus. And inter-module integration test also completed through data communication and signal waveform measurement repeatedly.

• Journal of Navigation and Port Research
• /
• v.36 no.8
• /
• pp.637-641
• /
• 2012

In this paper, the method that reduce a computation time by optimizing computation process is proposed to realize low-power underwater acoustic communication system. At first, dependency of decision delay on tap length of linear equalizer was investigated. Variance is calculated based on this result, and the optimal decision delay bound is estimated. In addition to decide optimal tap length with decision delay, we extracted the MSE(Mean Square Error) graph. From the graph, we obtained variance value of the MSE-decision delay, and estimated the optimum decision delay range from the variance value. Also, using the extracted optimal parameters, we performed a simulation. According to the result, the simulation employing optimal tap length, which is only 40% of maximum tap length, showed a satisfactory performance comparable to simulation employing maximum tap length. We verified that the proposed method has 33% lower tap length than maximal tap length via sea trial.

• Journal of IKEEE
• /
• v.17 no.3
• /
• pp.385-392
• /
• 2013

In this paper, microstrip antenna to enhance the isolation between transmitting port and receiving port under the proximity objects is proposed, and applied to the Doppler radar sensor working at 5.8GHz ISM band which detects vital signals of a human body. Two 3dB quadrature hybrids are placed around radiation patch to form a balanced structure between transmitting port and receiving port, such that it consistently provides enhanced Tx/Rx isolation and excellent return loss over nearby objects. It is theoretically analyzed and simulated to verify the validity of the proposed application. The fabricated antenna that is 2mm away from the human body, has more than 16 dB return loss and at least 30dB isolation over ISM frequency band of 5.8GHz.

• IE interfaces
• /
• v.10 no.1
• /
• pp.135-143
• /
• 1997

The importance of training for NC, CNC and Machining Center has been greatly increased. This paper presents implementation of a DNC(Direct Numerical Control) operating software for educational system. This system is able to connect 8-32 CNCs to Control PC with RS232 multi-port serial card. Therefore, it allows much efficiency in training even after costs are considered. The KISCO DNC S/W for above system includes various communication functions, communication parameters setting, program editor and user-friendly environment. This software was developed with C and Windows programming. It was proved in function and stability by iterative field tests.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1328-1331
• /
• 1996

The importance of training for NC, CNC and Machining Center has been greatly increased. This paper presents implementation of a DNC system and operating software for educational purpose. This system is able to connect 8-32 CNCs to Control PC with RS232 multi-port serial card. Therefore, it allows much efficiency in training even after costs are considered. The KISCO DNC S/W for above system includes various communication function, communication parameter setting, program editor, tool management and user-friendly environment.