• ETRI Journal
• /
• 제33권5호
• /
• pp.752-758
• /
• 2011

This paper presents a clock and data recovery circuit that supports dual data rates of 5.4 Gbps and 3.24 Gbps for DisplayPort v1.2 sink device. A quarter-rate linear phase detector (PD) is used in order to mitigate high speed circuit design effort. The proposed linear PD results in better jitter performance by increasing up and down pulse widths of the PD and removes dead-zone problem of charge pump circuit. A voltage-controlled oscillator is designed with a 'Mode' switching control for frequency selection. The measured RMS jitter of recovered clock signal is 2.92 ps, and the peak-to-peak jitter is 24.89 ps under $2^{31}-1$ bit-long pseudo-random bit sequence at the bitrate of 5.4 Gbps. The chip area is 1.0 mm${\times}$1.3 mm, and the power consumption is 117 mW from a 1.8 V supply using 0.18 ${\mu}m$ CMOS process.

• 대한기계학회논문집B
• /
• 제21권5호
• /
• pp.650-658
• /
• 1997

Analysis and control of intake charge motion such as swirl and tumble are very important factors in improving the gasoline engine performance. In this paper, single-frame PTV (particle tracking velocimetry) is used to investigate intake tumble patterns in a steady flow test rig of gasoline engine with dual-intake-valve and pent-roof combustion chamber. Intake tumble pattern is quantified in accordance with blockage ratio of TIV (tumble intensifying valve) with single- frame PTv.The view of the instantaneous 2-D velocity field gives a realistic understanding of in-cylinder flow field. Thus it is confirmed that PTV is a effective tool in engine design. In conventional port, two tumble structures appear clearly, and the larger one is observed under the exhaust valve side and the smaller is right below the intake valve side. The larger vorticity is observed in TIV port, thus it is concluded that TIV have an effect on intensified tumble motion in cylinder flow.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.2
• /
• pp.9-14
• /
• 2006

Galileo is the European Global Navigation Satellite System, under civilian control, and consists on a constellation of medium Earth orbit satellites and its associated ground infrastructure. Galileo will provide to their users highly accurate global positioning services and their associated integrity information. The elements in charge of the computation of Galileo navigation and integrity information are the OSPF (Orbit Synchronization Processing Facility) and IPF (Integrity Processing Facility), within the Galileo Ground Mission Segment (GMS). Navigation algorithms play a key role in the provision of the Galileo Mission, since they are responsible for computing the essential information the users need to calculate their position: the satellite ephemeris and clock offsets. Such information is generated in the Galileo Ground Mission Segment and broadcast by the satellites within the navigation signal, together with the expected a-priori accuracy (SISA: Signal-In-Space Accuracy), which is the parameter that in fault-free conditions makes the overbounding the predicted ephemeris and clock model errors for the Worst User Location. In parallel, the integrity algorithms of the GMS are responsible of providing a real-time monitoring of the satellite status with timely alarm messages in case of failures. The accuracy of the integrity monitoring system is characterized by the SISMA (Signal In Space Monitoring Accuracy), which is also broadcast to the users through the integrity message.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1595-1607
• /
• 2018

In this paper, a hierarchical control strategy is introduced to control a new three-port multidirectional DC-DC converter for integrating an energy storage system (ESS) to a bipolar DC microgrid (BPDCMG). The proposed converter provides a voltage-balancing function for the BPDCMG and adjusts the states of charge (SoC) of the ESS. Previous studies tend to balance the voltage of the BPDCMG buses with active sources or by transferring power from one bus to another. Furthermore, the batteries available in BPDCMGs were charged equally by both buses. However, this power sharing method does not guarantee efficient operation of the whole system. In order to achieve a higher efficiency and lower energy losses, a triple-layer hierarchical control strategy, including a primary droop controller, a secondary voltage restoration controller and a tertiary optimization controller are proposed. Thanks to the multi-functional operation of the proposed converter, its conversion stages are reduced. Furthermore, the efficiency and weight of the system are both improved. Therefore, this converter has a significant capability to be used in portable BPDCMGs such as electric DC ships. The converter modes are analyzed and small-signal models of the converter are extracted. Comprehensive simulation studies are carried out and a BPDCMG laboratory setup is implemented in order to validate the effectiveness of the proposed converter and its hierarchical control strategy. Simulation and experimental results show that using the proposed converter mitigates voltage imbalances. As a result, the system efficiency is improved by using the hierarchical optimal power flow control.

• 한국항만학회지
• /
• 제13권2호
• /
• pp.245-254
• /
• 1999

This paper aims to derive the strategies for the container terminal in Pusan. So it has focused on analyzing the current conditions of Pusan container terminal while evaluating the difficulties arising from the existing facilities/equipment and the operating system in the Pusan Korea Container Terminal through the workers at the container terminal and at off-dock CY. The object of this study is to assist the existing terminals to operate the facilities/equipment reasonably and to contribute shaping the ports policy which will be the basis of constructing new ports that will remain competitive while maintaining superiority over the ports in northeast area. According to the analysis 68% of the supplier answered that their terminal services which are the most important factor in running a terminal were superior to the other while only 28% of the user answered that they thought the current services were superior. For the areas of supplementing the terminal the people working at the terminal answered in the order of business operation equipment the number of berth service and management ability while the user answered in the order of service computer system transportation system and equipment. According to the regression analysis it became clear that there should be more effort toward improving or supplementing the facility scale facility usage charge transportation facilities which will assist in developing competitiveness of the terminal. It was also noted that management ability and business ability were mentioned as the important factors in operating a terminal.

• 한국추진공학회지
• /
• 제24권6호
• /
• pp.28-44
• /
• 2020

본 연구에서는 무인 항공기용 소형 2행정 엔진의 성능 개선을 위해 다양한 전송 포트 형상의 가스교환 성능을 평가하였다. 성능 평가를 위해 네 가지 전송 포트 형상에 따른 3차원 전산 유체 해석을 진행하였으며, 가스 교환 성능의 정량적 평가를 위해 이상적 소기 모델인 완전 대체 소기 모델과 완전 혼합 소기 모델을 바탕으로 새로운 3단계 소기 모델을 개발하여 해석 결과에 적용하였다. 2행정 엔진의 전송 포트 형상 변경을 통해 흡기의 단락 현상을 효과적으로 줄였으며 가스 교환 과정 동안의 실린더 내 난류 에너지 또한 크게 개선되었다. 또한, 전송 포트 형상 별 3단계 소기 모델의 적용을 통해 가스 교환 성능을 정량적으로 평가할 수 있었으며, 포트 형상 별 소기 양상의 차이를 확인할 수 있었다.

• 한국항만경제학회지
• /
• 제38권3호
• /
• pp.133-149
• /
• 2022

항만물류는 국가와 기업에 경쟁력 강화의 중추적인 산업으로 우리나라 수출입 물동량의 대다수를 차지할 만큼 중요한 역할을 하고 있어 우리나라의 산업중에서도 그 중요성은 실로 엄청나다. 이처럼 중요한 역할을 하고 있는 항만은 하역작업, 부두내 이송작업과 보관이 동시에 이루어지며 굉장히 복잡한 흐름으로 구성이 되어 있다고 할 수 있다. 특히 항만하역작업은 대형선박, 컨테이너이송을 위한 크레인작업등 대형 하역기계들과 운반장비들이 이동하며 수많은 재해의 위험이 도사리고 있고 재해 발생시 중대재해로 이어지는 경우가 많아 항만하역근로자들은 항상 재해의 위험에서 벗어날 수 없는 환경이다. 본 연구는 중대재해처벌법에 대한 문헌연구들을 통해 중대재해처벌법이 항만하역근로자들에게 어떠한 영향을 미쳤는지에 대해 파악하고, 항만근로자와, 항만관리감독자의 중대재해처벌법 시행에 따라 안전교육에 대한 만족도 변화가있는지 알아봤다. 본 연구를 통해 항만하역근로자는 인지,태도,경험 요인에서 관리자보다 안전에 대한 인식을 더 많이 하고있는 것으로 나타났다. 이는 항만하역 관리자는 하역작업에 투입되지 않기 때문에 근로자보다 안전에 대한 인식이 근로자보다는 낮게 분석되었다. 이는 근로자에게 안전한 작업을 교육하고 안전에 대해 경각심을 가져야되는 관리자들이기에 항만하역 관리자에게도 안전에 대한 인식에 대한 변화가 필요할 것으로 보여진다. 중대재해처벌법이 22년 1월 27일 시행되어 법 시행초기 단계로 법이 정착까지 실무업무를 일선에서 수행하고 있는 담당자들은 많이 혼동되고 애매한 부분들이 많이 발견되고 있다. 업무에 혼선이 생기지 않도록 법에 대한 명확한 기준과 현업에서 안전재해가 발생되지 않는 목적으로 중대재해처벌법이 개정이 필요해 보인다. 또한 향후 보다 의미 있는 연구 결과를 도출하기 위해서는 문헌연구를 심화하여 여러 요인들을 찾아보고 인터뷰등의 조사방법을 사용하여 근로자와 관리자의 재해 인식에 대한 연구가 지속적으로 필요할 것으로 보인다.

• 한국연소학회지
• /
• 제18권1호
• /
• pp.7-12
• /
• 2013

A quasidimensional program is developed for a four stroke cycle homogeneous GDI (Gasoline Direct Injection) engine. It includes models for spray, burning rate and chemistry to predict knock and emissions. With early injection a homogeneous GDI engine goes through spark ignited, turbulent premixed combustion as in PFI (Port Fuel Injection) engines. The cylinder charge is divided into unburned and burned zone with the latter divided into multiple zones of equal mass to resolve temperature stratification. Validation is performed against measured pressure traces, NOx and CO emissions at different load and RPM conditions. Comparison is made between an empirical knock model and predictions by the chemistry model in this work.

• 한국감성과학회:학술대회논문집
• /
• 한국감성과학회 2000년도 춘계 학술대회 및 국제 감성공학 심포지움 논문집 Proceeding of the 2000 Spring Conference of KOSES and International Sensibility Ergonomics Symposium
• /
• pp.206-211
• /
• 2000

A product consists of some parts. The integrity of a product might not be explained from individual parts. The fishery processed goods can be used as a model. The characteristics which derives from a product as a whole is more important than right or wrong of individual parts. All commodities to appeal for consumers have much in common. I explain the process of producing a new tasteful commodity by observing the fishery processing goods business. This is a part of data acquired from a research at a fishery port in Japan. (1) A project manager should be a person in charge of marketing, which makes success easier. (2) A product and process design should be done concurrently. (3) As for a synthetic architectural commodity, a strong leader is a must. (4) To understand material and sensibility information, we can use the above-mentioned.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.157-159
• /
• 2007

For a vessel to safely navigate on the ocean, it is required to check the vessel position as frequently as possible. When a vessel navigates oil the ocean or entering/leaving a port, the target area such as islands, points and mountain peak, etc. are used. However, when such target are not available or when vessel navigates in night time, installed artificial navigation aid facilities help successful vessel navigation. Light Wave Aid helps to confirm a position to the navigator directly and quickly. So, the synchronous light to display the accurate signal has wide applications. However, lantern domestic industry is small, and most of the products show non-compatibility. Consequently, this paper presents the synchronous lighting using UTC of GPS, which maintains compatibility with different lanterns. Also, by replacing conventional electric bulb with LED lamp, simple and efficient lighting system is obtained.