• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.57 no.3
• /
• pp.215-224
• /
• 2008

In this paper, we introduced a linear motor-based transfer system with an active pid controller which can be replaced with an automated guided vehicle (AGV) for the port automation. This system, which is named LMCTS(liner motor-based container transfer system), is based on PMLSM (permanent magnetic linear synchronous motor) which basically consists of stator modules on the rail and shuttle car. Therefore more progressive and adaptive control mechanisms should be required to control a system with large variation of container weight, the difference of each characteristic of stator modules, a stator module's trouble etc. We introduced an active control mechanism with an online tuning scheme using modified evolutionary strategy. Some computer simulations are implemented to assess the robustness of the proposed system.

• Journal of the Korea Society of Computer and Information
• /
• v.6 no.2
• /
• pp.58-64
• /
• 2001

The quantity of container transportation of the world harbors is constantly increasing by 8.8％ per year until 2011. present port facilities will not satisfy it. So facility expansion is necessary. Because the processing cost in the harbor becomes to 30％ of total transportation expense, major ports in the world are making an effort in the automation facilities to solve the problems of higher labor costs and insufficient labor and to maximize the efficiency of the work and use of the land. Especially, the automation of the gate, which is the place of cargo's appearance and disappearance, the node which creates the information. is now rising as the important issue. In this study suggests more efficient design for port gate automation.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.88-94
• /
• 2005

A swirl ratio of a charge in the cylinder could be calculated by measuring both the rotary speed of paddle and the intake air flow rate in the swirl measurement apparatus fur several positions of valve lift. The automation of the swirl ratio measurement for a cylinder head is achieved by controlling both the valve lift of cylinder head and a suction pressure of the surge tank, instead of controlling them manually. PID control of the surge tank pressure and positioning a valve lift of the cylinder head are also achieved by using two step motors, respectively. Rotating speed of a paddle are measured using an optical sensor and a counter. Flow rate are measured from ISA 1932 flow nozzle by reading a differential pressure gauge position using IEEE-1394 camera. Time to measure the swirl ratio for a port in the cylinder head is drastically reduced from an hour to 3 minutes by automation control of the apparatus.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.2
• /
• pp.164-171
• /
• 2010

We have studied the port-automation system which is requested by the steep increment of cost and complexity for processing the freight. This paper will introduce a new algorithm for navigating and controlling the autonomous Guided Vehicle (AGV). The camera has the optical distortion in nature and is sensitive to the external ray, the weather, and the shadow, but it is very cheap and flexible to make and construct the automation system for the port. So we tried to apply to the AGV for detecting and tracking the lane using the CCD camera. In order to make the error stable and exact, this paper proposes new concept and algorithm for obtaining the error is generated by the Virtual Photo-Sensor Array (VPSA). VPSAs are implemented by programming and very easy to use for the various autonomous systems. Because the load of the computation is light, the AGV utilizes the maximal performance of the CCD camera and enables the CPU to take multi-tasks. We experimented on the proposed algorithm using the mobile robot and confirmed the stable and exact performance for tracking the lane.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2017.11a
• /
• pp.74-75
• /
• 2017

The operations of the warehouses are labor intensive. Automation of the warehouse is made by efforts to shorten the work time and reduce the cost according to the change of the production form of the company and the buyer's demand. Storage warehouses vary in size and shape, and equipment and facilities used in storage warehouses vary according to purpose and use. In order to automate storage, it is necessary to introduce an operating system, which varies depending on the type of equipment and operation policy. In this paper, we review the requirements for the automation of small and medium-sized storage warehouses, and classify the equipment selection and operating system options into effective scenarios to introduce an effective automation system. Therefore, simulation is performed for each scenario, and the effect of automation is examined, and the effect of automation is verified through economic analysis through cost for automation introduction.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.345-348
• /
• 2006

LMTT (linear motor-based transfer technology) is horizontal transfer system in the maritime container terminal for the port automation. For LMTT system, shuttle cars are used instead of other types of cars. They are running on the routes which are stable on the terminal ground made of steel. The terminal scheduling complexity increases with the need of improving automation. It is necessary to make a good designed performance for the terminal system. This work presents a dispatching role using fuzzy logic for the shuttle cars. It considers the actual status of terminals and takes decisions on real time. A simulation is done to validate the role and two other dispatching rules to be compared.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.491-494
• /
• 2006

Kalman filtering (KF) is hard to be applied to the SINS (Strap-down Inertial Navigation System)/RDSS (Radio Determination Satellite Service) integrated navigation system directly because the time delay of RDSS positioning in active mode is random. BP (Back-Propagation) Neuron computing as a powerful technology of Artificial Neural Network (ANN), is appropriate to solve nonlinear problems such as the random time delay of RDSS without prior knowledge about the mathematical process involved. The new algorithm betakes a BP neural network (BPNN) and velocity feedback to aid KF in order to overcome the time delay of RDSS positioning. Once the BP neural network was trained and converged, the new approach will work well for SINS/RDSS integrated navigation. Dynamic vehicle experiments were performed to evaluate the performance of the system. The experiment results demonstrate that the horizontal positioning accuracy of the new approach is 40.62 m (1 ${\sigma}$), which is better than velocity-feedback-based KF. The experimental results also show that the horizontal positioning error of the navigation system is almost linear to the positioning interval of RDSS within 5 minutes. The approach and its anti-jamming analysis will be helpful to the applications of SINS/RDSS integrated systems.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2000.10b
• /
• pp.129-134
• /
• 2000

In this paper, we proposed a simulator for reconstructing and analyzing vessel collision accidents happened at sea and we verified validity of the system by applying it to some collision accidents. This system will offer us to advantage of time and human power by contributing to automation of judge's decision.

• Journal of Navigation and Port Research
• /
• v.29 no.7
• /
• pp.641-646
• /
• 2005

In cargo-working, it unavoidably happens that the quay crane slip along the rail and the container move from side to side. Especially, they involve a lot of risk in bad weather. The rail clamp is a mooring device to prevent that the quay crane slips along the rail due to bad weather or the wind blast while the quay crane do the cargo-working And it will play a greater role in port container terminal integration and automation To design the wedge type rail clamp, it is very important to determine the wedge angle. In this study, we expect that the design wind speed of the quay crane will change over 16m/s. Assuming that the design wind speed is 40m/s, we determined the proper wedge angle of the wedge type rail clamp for the 50ton class quay crane.

• Journal of the Korean Institute of Navigation
• /
• v.3 no.2
• /
• pp.59-69
• /
• 1979