규조토를 주원료로 사용한 서로 다른 조성비의 세라믹 슬러리를 압출성형하여 내열보호관을 제조하고, 기계적 강도, 미세구조, 탄소분석을 하였다. 입도가 $50\~100\;{\mu}m$ 다공성 규조토를 $60wt\%$로 고정하고, 조성물 변수로써 유$\cdot$무기바인더로 silica sol$(4.3\~7.3\;wt\%)$, CMC(Sodium CarboxyMethyl Cellulose $(6\~9\;wt\%)$) 및 paper powder$(4.7\~7.7\;wt\%)$를 $1\;wt\%$씩 변화시켜 최적의 배합비를 얻었다. 시편의 특성을 조사한 결과, 규조토 $60\;wt\%$에 silica sol $5.3\;wt\%$, CMC $7\;wt\%$를 첨가하였을 경우, 꺽임강도 7.12 MPa, 탄성율 1090 MPa, 압축강도 1.47 MPa, 탄소 $2.3\;wt\%$ 이하로 철강산업에서의 온도$\cdot$성분측정 및 sample 채취를 할 수 있는 용융금속 프로브용 규조토 내열보호관을 제조할 수 있었다.
국내산 kaolinite를 소성한 다음 실리카를 선택적으로 추출하여 중기공성 ${\gamma}-Al_2O_3$를 제조하였다. $1000^{\circ}C$에서 24시간 소성된 kaolinite는 소량의 무정형 실리카와 ${\gamma}-Al_2O_3$으로 이루어진 스피넬 상의 미세구조로 전이되었음을 확인하였다. 다공성 ${\gamma}-Al_2O_3$는 $25~90^{\circ}C$의 반응온도, 0.5~4h의 추출시간 및 1~8M의 KOH 농도범위에서 무정형 실리카를 선택적으로 용해하여 제조할 수 있었다. $90^{\circ}C$, 1시간 및 4M의 KOH 농도조건에서 얻어진 ${\gamma}-Al_2O_3$는 약 $40~80{\AA}$ 정도의 매우 좁은 하나의 기공크기 분포를 가지고 있었으며, mesopore의 기공이 많이 생성되었다. 비표면적은 $250\textrm{m}^2/g$이고, 총 기공부피는 $0.654\textrm{cm}^3/g$로 나타났다.
가스하이드레이트를 이용하여 이산화탄소+수소 혼합가스로부터 이산화탄소를 선택적으로 분리, 회수하기 위한 공정개발의 가능성을 살펴보고자 상평형 조건을 측정하였다. 100 nm의 공극 직경을 갖는 실리카겔 공극 내에서 형성되는 가스하이드레이트-물-기체의 삼상평형 하이드레이트 해리조건을 측정하였으며, 274.15 K에서 하이드레이트-기체의 이상조건 상태로 유지한 상태에서 이산화탄소의 농도변화에 따른 기상 및 하이드레이트상의 가스 조성을 분석하였다. 일정한 온도조건에서 기상의 이산화탄소 농도가 증가할수록 평형해리압력은 감소하는 경향을 보였으며, 순수 물에서의 상평형 압력과 비교하면 실리카겔 공극에서의 하이드레이트 상평형은 모세관효과에 의해 생성저해 현상이 발생하였다. 42 mol% 이산화탄소와 58 mol% 수소 혼합가스로부터 얻어지는 가스하이드레이트상의 조성은 이산화탄소 95 mol% 상으로 측정되었는데, 이는 기존의 순수 물을 이용하여 가스하이드레이트를 제조함으로써 이산화탄소를 농축, 분리하는 방법에 비해 매우 향상된 결과를 보여주고 있다. 하이드레이트 슬러리를 제조하여 2단 반응으로 분리하는 기존 방법에 비해 공정을 단순화할 수 있는 이 방법은 고정층 반응기로 쉽게 적용이 가능하므로 유용한 연소 전 이산화탄소 회수방법으로 이용할 수 있을 것으로 기대된다.
Poly(imide siloxane)(Si-PI)와 polyvinylpyrrolidone (PVP)를 혼합한 고분자를 사용하여 실리카가 함유된 탄소 분리막을 제조하였다. 고분자 혼합물의 열분해에 의해 제조 된 다공성 탄소 구조의 특성은 두 고분자의 미세 상 분리 거동과 관련이 있다. Si-PI와 PVP의 고분자 혼합물의 유리 전이 온도(Tg)는 시차 주사 열량계를 사용하여 단일 Tg로 관찰되었다. 또한 $C-SiO_2$ 막의 질소 흡착 등온선을 조사하여 다공성 탄소 구조의 특성을 규명했다. Si-PI/PVP로부터 유도 된 $C-SiO_2$ 막은 IV형 등온선을 나타내었고 중간기공의 탄소 구조와 관련된 히스테리시스 루프를 가지고 있었다. 분자 여과 확인을 위해서, Si-PI/PVP의 비율과 열분해 온도 및 등온 시간과 같은 열분해 조건을 다르게 하여 $C-SiO_2$ 막을 제조하였다. 결과적으로, 120분 간의 등온 시간 동안 $550^{\circ}C$에서 Si-PI/PVP의 열분해에 의해 제조된 $C-SiO_2$ 막의 투과도는 820 Barrer ($1{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$)이었으며, $O_2/N_2$ 선택도는 14이었다.
본 연구에서 졸-겔 방법에 의하여 나노 기공을 가지는 세라믹막을 제조하여 단일 조성의 헬륨과 질소를 가지고 기체투과 실험을 수행하였다. 기공 크기 $0.1{\mu}m$, 기공율 32%의 평막형 ${\alpha}-Al_2O_3$ 지지체를 제조하였으며, 지지체를 담지하여 코팅하는 방법으로 4nm의 기공 크기를 가지는 ${\gamma}-Al_2O_3$ 중간층을 제조하였다. 실리카 졸은 TEOS의 산 촉매 가수분해와 축중합반응을 통하여 합성하였다. 막은 딥코팅과 소결과정을 거쳐 제조되었다. 졸-겔 법에 의해 합성된 세라믹 막을 통한 헬륨, 질소 투과 실험은 기체의 투과 특성을 파악하기 위하여 시행하였다. 질소에 대한 헬륨의 선택도는 $100{\sim}160$ 정도였으며 헬륨의 투과도는 $303{\sim}363K$의 온도 범위에서 $10^{-7}mol/m^2{\cdot}s{\cdot}Pa$ 정도였다.
본 연구는 열유도 상분리법(thermally induced phase separation, TIPS)을 사용하여, 수처리 분리막에 적용하기 위해, 응고조의 열용량의 변화를 위해 서로 다른 두 용액의 함량을 조절하였다. 또한, 온도의 변화를 통해 분리막의 구조 변화에 대하여 관찰하였다. 분리막을 제조하기 위한 소재로는 수처리 분리막에 주로 이용되는 기계적 물성과 내화학성이 우수한 poly (vinylidene fluoride)(PVDF)를 사용하였고, 첨가제로 실리카를 이용하였다. 희석제는 PVDF와 호환성이 좋은 dioctyl phthalate (DOP), dibutyl phthalate (DBP)를 사용하였다. 응고액의 함량 변화에 따른 열용량 변화에 따라 제조된 분리막의 구조를 관찰하기 위해 SEM 이미지를 촬영하였다. 열용량이 증가할수록 PVDF의 결정화 속도가 느려져 큰 기공을 나타내며 열용량이 작을수록 결정화 속도가 증가하여 작은 기공이 생기는 것을 확인하였다.
홍삼의 물추출물을 먼저 다공성의 polymer로 분획을 나누고 다음에 Silica gel컬럼 크로마토 그래피로 분리하여 2개의 새로운 형태의 배당체인 A($C_{12}H_{16}O_(8)$)와 B($C_{9}H_{16}O_{7}$)를 분리하였으며, 이때 이때 수율은 각각 $0.04{\%}$와 $0.16{\%}$였다. A와 B의 구조는 NMR과 MS에 의햇 밝혀졌다. 백삼의 추출물에서는 이들 배당체는 검출되지 않았으며, 한편 증삼과정중에 A와 B의 형성기 전이 논의될 것이다. 또한 홍삼의 뇌두로부터 사포닌의 분리 및 확인이 역시 보고될 것이다.
This talk will begin with the demonstration of facile synthesis of silicon nanostructures using the magnesiothermic reduction on silica nanostructures prepared via self-assembly, which will be followed by the characterization results of their performance for energy storage. This talk will also report the fabrication and characterization of highly porous, stretchable, and conductive polymer nanocomposites embedded with carbon nanotubes (CNTs) for application in flexible lithium-ion batteries. It will be presented that the porous CNT-embedded PDMS nanocomposites are capable of good electrochemical performance with mechanical flexibility, suggesting these nanocomposites could be outstanding anode candidates for use in flexible lithium-ion batteries. Directed self-assembly (DSA) of block copolymers (BCPs) can generate uniform and periodic patterns within guiding templates, and has been one of the promising nanofabrication methodologies for resolving the resolution limit of optical lithography. BCP self-assembly processing is scalable and of low cost, and is well-suited for integration with existing semiconductor manufacturing techniques. This talk will introduce recent research results (of my research group) on the self-assembly of Si-containing block copolymers for the achievement of sub-10 nm resolution, fast pattern generation, transfer-printing capability onto nonplanar substrates, and device applications for nonvolatile memories. An extraordinarily facile nanofabrication approach that enables sub-10 nm resolutions through the synergic combination of nanotransfer printing (nTP) and DSA of block copolymers is also introduced. This simple printing method can be applied on oxides, metals, polymers, and non-planar substrates without pretreatments. This talk will also report the direct formation of ordered memristor nanostructures on metal and graphene electrodes by the self-assembly of Si-containing BCPs. This approach offers a practical pathway to fabricate high-density resistive memory devices without using high-cost lithography and pattern-transfer processes. Finally, this talk will present a novel approach that can relieve the power consumption issue of phase-change memories by incorporating a thin $SiO_x$ layer formed by BCP self-assembly, which locally blocks the contact between a heater electrode and a phase-change material and reduces the phase-change volume. The writing current decreases by 5 times (corresponding to a power reduction of 1/20) as the occupying area fraction of $SiO_x$ nanostructures varies.
(Type A, B 및 C)으로 분류되며, 이들 미끼구조들은 단일 단괴에서도 혼합구조로서 흔히 산출된다. 각 유형은 상이한 화학성분과 구성광물 및 결정도를 나타내며 이 중 A형은 조립질 조직을 갖고있고 다른 유형에 비해 결정도가 높은 Todorokite로 주로 구성되고 Mn의 함량도 놀은 반면에 B와 C형은 중간 내지는 세립질 조직을 갖고 있다$(Mn=30.6\%)$. 또한 A형은 상대적으로 빠른 성장속도를 나타내며, 보트리오이드 사이의 공극에서 Smectite와 규질화석이 나타난다. 이러한 특징은 A형 구조를 갖는 미세한 층(microlayer)의 성인이 해저에서의 열수작용과 관련된 것으로 생각되며, 열수용액은 주변 단열대와 해저확장대로부터 공급된 것으로 추정된다.
We developed a water-selective ceramic composite membrane for use as a dehydration membrane reactor for dimethylether (DME) synthesis from methanol. The membranes were modified on the porous stainless steel support by the sol-gel method accompanied by a suction process. The improved membrane modification process was effective in increasing the vapour permselectivity by removal of defects and pinholes. The optimized alumina/silica composite membrane exhibited a water permeance of 1.14${\times}$10$^{-7}$ mol/$m^2$.sec.Pa and a water/methanol selectivity of 8.4 at permeation temperature of 25$0^{\circ}C$. The catalytic reaction for DME synthesis from methanol using the membrane was performed at 23$0^{\circ}C$, and the reaction conversion was compared with that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor was much higher than that of the conventional fixed-bed reactor. The reaction conversion of the membrane reactor and the conventional fixed-bed reactor was 82.5 and 68.0%, respectively. This improvement of reaction efficiency can last if the water vapour produced in the reaction zone is removed continuously.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.