• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.815-823
• /
• 2011

다공성 물질 내부의 연소 현상은 저발열량 연료의 연소 및 연소열의 재생을 위한 수단으로 다양한 형태로 산업현장에 응용되고 있다. 하지만 다공성 물질 내부에서의 연소 현상은 직접적인 관찰이 힘들다는 점과 다공성 물질의 복잡한 내부 구조로 인해 매우 제한적인 연구가 진행되어 왔다. 본 연구에서는 복잡한 다공성 물질의 구조 내부에서의 화염의 안정화 특성에 관한 이해를 위해 내부 관찰이 가능하도록 다수의 석영판으로 구성된 다중채널 형태의 모형 연소기를 제안하고 이를 이용한 간단한 실험 결과를 제시한다. 그리고 이러한 다중채널내부 화염의 안정화에 관한 간단한 기초해석 모델을 제안한다. 다수의 채널 내부에 형성된 화염은 채널간의 열전달에 의해 화염의 공간 분포가 변화하고 그 결과로 연소기 내부의 가연한계에 변화가 발생한다. 채널의 재료 특성 및 당량비에 따른 가연한계의 변화를 제시하였으며, 이 결과는 다공성 연소기 내부화염의 이해에 도움될 것이다.

• 풍력에너지저널
• /
• 제4권1호
• /
• pp.68-74
• /
• 2013

Offshore wind farm is being increased since there are much trouble to develop onshore wind farm. But in the offshore, wind turbine wake does not dissipate less than onshore wind turbine because of low turbulence level. Thus this remained wake interacted to other wind turbine. This interaction reduces energy production in wind farm and have a bad influence on fatigue load of wind turbine. In this research, CFD model was constructed to analyze wake effect in offshore wind farm. A method that wind turbine rotor region was modelled in porous media was devised to reduce computation load and validated by comparison with Horns Rev measurement. Then wake interaction between two wind turbine was analyzed by devised porous model.

• 한국자동차공학회논문집
• /
• 제15권1호
• /
• pp.78-88
• /
• 2007

In the present study a detailed examination of various porous media models for predicting filtration efficiency and pressure drop of diesel particulate filter (DPF), such as sphere-in-cell and constricted tube models, are attempted. In order for demonstrating their validities of correct estimation on permeability, geometry of property configurations common in commercial cordierite DPFs are correlated to the porous media flow models, and validations of predicted filtration efficiencies due to the use of different unit collectors are made with experiments. The result shows that the porosity, pore size and permeability of cordierite DPF can be successfully correlated by Kuwabara flow field with correction factor of 0.6. The unit collector efficiency predicted by sphere-in-cell model agrees very well with measurements in accumulation mode, whereas that by constricted tube model with significant prediction error.

• Coupled systems mechanics
• /
• 제7권6호
• /
• pp.649-668
• /
• 2018

In this paper, we present a numerical model for fluid-structure interaction between structure built of porous media and acoustic fluid, which provides both pore pressure inside porous media and hydrodynamic pressures and hydrodynamic forces exerted on the upstream face of the structure in an unified manner and simplifies fluid-structure interaction problems. The first original feature of the proposed model concerns the structure built of saturated porous medium whose response is obtained with coupled discrete beam lattice model, which is based on Voronoi cell representation with cohesive links as linear elastic Timoshenko beam finite elements. The motion of the pore fluid is governed by Darcy's law, and the coupling between the solid phase and the pore fluid is introduced in the model through Biot's porous media theory. The pore pressure field is discretized with CST (Constant Strain Triangle) finite elements, which coincide with Delaunay triangles. By exploiting Hammer quadrature rule for numerical integration on CST elements, and duality property between Voronoi diagram and Delaunay triangulation, the numerical implementation of the coupling results with an additional pore pressure degree of freedom placed at each node of a Timoshenko beam finite element. The second original point of the model concerns the motion of the outside fluid which is modeled with mixed displacement/pressure based formulation. The chosen finite element representations of the structure response and the outside fluid motion ensures for the structure and fluid finite elements to be connected directly at the common nodes at the fluid-structure interface, because they share both the displacement and the pressure degrees of freedom. Numerical simulations presented in this paper show an excellent agreement between the numerically obtained results and the analytical solutions.

• Korean Chemical Engineering Research
• /
• 제53권6호
• /
• pp.814-817
• /
• 2015

A new ionic mass transfer correlation is derived for the fluid-saturated, horizontal porous layer. Darcy-Forchheimer model is used to explain characteristics of fluid motion. Based on the microscales of turbulence a backbone mass transfer relation is derived as a function of the Darcy-Rayleigh number, $Ra_D$ and the porous medium Schmidt number, $Sc_p$. For the Darcy's limit of $Sc_p{\gg}Ra_D$, the Sherwood number, Sh is a function of $Ra_D$ only. However, for the region of high $Ra_D$, Sh can be related with $Ra_DSc_p$. Based on the present backbone equation and the electrochemical mass transfer experiments which are electro plating or electroless plating, the new ionic mass transfer correlation is suggested in the porous media.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.145-150
• /
• 2009

In this study, characteristics of microwave and convective drying are studied by using a multiphase porous media model. Temperature and moisture profiles for hot-air convective heating and microwave heating of 1-D porous media with varying time and space are numerically investigated. This result shows the microwave drying method is more effective than the convective drying method. Comparing to convective drying, microwave drying can increase temperature and evaporation rate significantly since microwave generates internal heat and increases internal pressure, which results in moisture movement toward the surface on which moisture is vaporized.

• 드라이브 ㆍ 컨트롤
• /
• 제19권1호
• /
• pp.62-68
• /
• 2022

Considering the characteristics of industrial machines that lack vehicle-induced wind, forced convection by a cooling fan is mostly required. Therefore, numerical analysis of an engine room is usually performed to examine the cooling performance in the room. However, most engine rooms consist of a number of parts and components at specific positions, leading to high costs for numerical modeling and simulation. In this paper, a new methodology for three-dimensional computer-assisted design simplification was proposed, especially for the pile of components and parts at the engine room outlet. A porous media model and regression analysis were used to derive a meta-model for imitating the flow rate reduction at the outlet by the pile. The results showed that the fitted model was reasonable considering the coefficient of determination. The final numerical model of the engine room was then used to simulate the velocity distribution by changing the mass flow rate at the outlet. The results showed that both velocity distributions were significantly changed in each case and the meta-model was valid in imitating the flow rate reduction by some piles of components and parts.

• 설비공학논문집
• /
• 제19권2호
• /
• pp.175-182
• /
• 2007

The objective of the present study is to investigate the heat storage characteristics of a packed bed according to periodically oscillating flows. Experiments have been performed to measure transient temperature distributions in solid and fluid Phases of the porous media. A simplified analytical model has been developed with intra-particle and dispersion effects neglected, and non-dimensional parameters have been derived. The transient temperature distributions according to the simplified numerical model agree well with the experimental results. Heat storage efficiencies defined in two different ways are obtained for various time periods and face velocities.

• 한국토양비료학회지
• /
• 제40권3호
• /
• pp.189-195
• /
• 2007

Riew와 Sposito의 차원 분열 모델을 적용하여 토양과 상토를 대상으로 다공성 매체의 공극 분포와 보수력 비교를 시도하였다. 토양 시료는 라이시메터에서 2" 코아로 채취하였다. 상토 시료는 코코피트, 제올라이트 및 펄라이트를 혼합하여 아크릴 코아(100 mL)에 충진하여 조제하였다. 식 D=log(N)/log(1/r)를 포함한 차원 분열 모델에 의한 계산 Excell 프로그램을 작성하고, 이에 의해 분획된 다공성 매질을 이루는 보다 작은 크기(부피)의 매질 분획 상수인 N 값과 자기유사 비율 r 값을 얻었다. 이에 의해 대상 토양과 상토의 공극 분포와 빈도에 대한 자료를 얻을 수 있었다. 그 결과 라이시메타 토양은 상토 보다 더 넓은 공극 분포를 갖으며, 이에 비해 평균 공극크기는 상토 보다 라이시메타 토양에서 적은 것으로 해석되었다. 또한 공극크기(${\gamma}$) 분포에 따른 토양, 상토의 보수력은 토양은 상당한 단계의 토양수분이 빠져 나갔을 때 포장용수량(FC, 30kPa) 상태에 이르고, 상토는 비교적 적은 단계에서 포장용수량에 이르는 것으로 나타났다.

• 방사성폐기물학회지
• /
• 제16권2호
• /
• pp.223-232
• /
• 2018

사용후핵연료 저장용기의 공기 흡입구 및 배기구에는 외부환경으로부터 이물질의 유입을 방지하기 위하여 bird screen이 설치되며, bird screen에서는 공기의 유동 저항이 발생하게 된다. 본 연구에서는 Bird screen mesh의 단순화 모델을 이용한 열해석을 수행하기 위하여 다공성매질 해석모델을 개발하였다. CFD 해석을 이용하여 다공성매질에 대한 유동저항계수를 산출하고 이에 대한 신뢰성을 입증하였다. 다공성매질 해석모델을 이용하여 콘크리트 저장용기의 열해석을 수행하고 bird screen을 갖는 콘크리트 저장용기의 열시험을 수행하였다. Bird screen mesh를 고려한 열시험 결과와 다공성매질을 고려한 열해석 결과를 비교하였으며, 해석 및 시험결과가 서로 잘 일치하였다. 해석결과는 시험결과에 비하여 다소 높은 온도분포를 보여 다공성매질을 사용한 콘크리트 저장용기의 열해석 결과에 대한 신뢰성 및 보수성이 입증되었다.