• 방사성폐기물학회지
• /
• 제4권1호
• /
• pp.9-15
• /
• 2006

결정질 암반에 위치한 가상의 방사성폐기물처분장에 대한 정확한 안전성 평가를 수행하기 위해서는 다공암반으로 대표되는 공학방벽 및 결정질 암반으로 대표되는 자연방벽을 모두 고려한 매질에서의 물질 거동 특성을 정확하게 모사하는 것이 중요하다. 본 논문에서는 단열-다공암반내 유동 및 물질전달의 정확한 해석을 위한 연결망 구축방법에 대하여 서술하였다. 실제 단열암반을 사실적으로 모사하기 위하여 단열 물성자료는 확률밀도함수를 이용하여 생성하였다. 2차원의 사각격자로 모사된 단열암반과 육면체로 모사된 다공암반간 교차선의 원활한 검색을 위하여 단열암반과 연결전 다공암반의 교차면에 가상의 단열암반을 추가적으로 도입하였다. 전체유동경로를 구성하기 저하여 생성된 단열들 간의 교차선을 효율적으로 검색할 수 있는 방법 및 단열암반 및 단열-다공암반간의 연결도를 신속히 확인하는 알고리즘을 제안하였다. 이러한 방법들은 추후 방사성폐기물처분장에서의 단열-다공 암반을 통한 핵종 이동 특성을 모사할 수 있는 수치코드 개발에 많은 도움을 줄 것으로 사료된다.

• 설비공학논문집
• /
• 제13권7호
• /
• pp.612-620
• /
• 2001

The optimum design of a heat exchanger with porous media insertion is studied in this paper. It is considered that the aluminum foam metal is inserted in a flat plate channel and air flows through it. The influence of the microstructure of the foam metal on the pressure drop and heat transfer is investigated utilizing previous analytical results and existing correlation equations. Design parameters are identified as the unit-cell size and the ligament thickness of the porous medium, and their effects are examined. The results show that there exists optimum microstructure of the porous media maximizing heat transfer with a constant pressure drop. When the increase in the pressure drop is within a practically acceptable range, the increase in the heat transfer is dominated by the increase in the heat transfer area due to the porous medium insertion. Consequently, among the porous media with a constant pressure drop, the heat transfer is maximized with a microstructure with maximum specific surface area.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2005년도 INTERNATIONAL SYMPOSIUM ON SOIL & GROUNDWATER ENVIRONMENT
• /
• pp.195-196
• /
• 2005

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2013년도 제46회 KOSCO SYMPOSIUM 초록집
• /
• pp.45-46
• /
• 2013

Stabilization characteristics of highly $N_2$-diluted $CH_4-O_2$ flame in an axially two-section porous inert medium were experimentally investigated for its application to the waste gas scrubber in semiconductor manufacturing processes. The flame behaviors were observed with respect to the fuel and $N_2$ flow rates and the equivalence ratios. As a result, four kinds of flame behaviors such as stable, flashback crossing the interface, blowout and sudden extinction were observed. It was also found that there exists two flame regime divided by a critical fuel flow rate. In addition, the flame stability was discussed based on the $N_2$ index which means the abatement capacity of our combustor in scrubbing the waste gas from the semiconductor processes.

• 한국수자원학회논문집
• /
• 제50권5호
• /
• pp.325-334
• /
• 2017

본 연구에서는 다공성 매질의 공극율과 투수능 그리고 유체의 동점성 계수와 같은 물리적 특성에 따른 유체흐름의 비선형 거동에 대한 수치적 분석을 수행하였다. 적용된 수치모형은 ANSYS CFX 3차원 유동해석 모형이며, 모형의 검증은 기존의 물리적 실험 결과 및 수치모의 결과의 적용을 통해 수행되었으며, 적용된 압력경사와 유속과의 관계 그리고 마찰계수와 레이놀즈 수와의 관계에 대해 비교적 잘 일치하였다. 다공성 매질의 공극율과 투수능 그리고 유체의 동점성 계수의 값을 변화시키면서 모의한 결과 유체의 동점성 계수가 다공성 매질의 유체흐름의 비선형 거동에 가장 큰 영향을 미치는 것으로 나타났다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.139-140
• /
• 2014

Stabilization characteristics of highly $N_2$-diluted $CH_4-O_2$ flame in an axially two-section porous inert medium were experimentally investigated for its application to the waste gas scrubber in semiconductor manufacturing processes. The flame behaviors were observed with respect to the fuel and $N_2$ flow rates and the equivalence ratios. As a result, four kinds of flame behaviors such as stable, flashback crossing the interface, blowout and sudden extinction were observed.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.112-117
• /
• 2000

A numerical study on natural convection in a vertical square cavity filled with a porous medium is carried out with Brinkman-Forchheimer-extended Darcy flow model, and the validity of local thermodynamic equilibrium assumption is studied. The local thermodynamic equilibrium refers to the state in which a single temperature can be used to describe a heat transfer process in a multiphase system. With this assumption, the analysis is greatly simplified because only one equation is needed to describe the heat transfer process. But prior to using this assumption, it is necessary to know in what conditions the assumption can be used. The numerical results of this study reveal that large temperature difference between fluid phase and solid phase exists near wall region, paticularily when the convection becomes dominant over conduction. And the influence of flow parameters such as fluid Rayleigh number, fluid Prandtl number, dimensionless particle diameter and conductivity ratio are investigated.

• 한국물환경학회지
• /
• 제21권4호
• /
• pp.393-397
• /
• 2005

In this study, flow in a porous medium is analyzed using a computer-extended perturbation series solution. The flow is modelled as a creeping flow in a periodically constricted channel. The channel walls have a sinusoidally varying width and the flow is analyzed in terms of its vorticity and stream functions in the Stokes flow regime. The perturbation series in terms of a small parameter, average width to length ratio, is extended with a computer resulting in purely asymptotic series and Pade summation is used to obtain final results. Resulting flow shows flow separations in the widening section and immobile zones in the widest section of the flow regime with reattachment in the narrowing section. Analysis of the flow separation phenomena resulted in a correlation between the two geometric parameters of the channel walls to predict the onset of flow separation in the Stokes flow regime.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.57-64
• /
• 2000

The present work investigates the heat transfer characteristics for laminar fully developed forced convection in an internally finned tube with axially uniform heat flux and peripherally uniform temperature through analytical models of convection in a porous medium. Using the Brinkman-extended Darcy flow model and the two equation model fur heat transfer, analytical solutions fur fluid flow and heat transfer are obtained and compared with the exact solution for fluid flow and the numerical solutions for conjugate heat transfer to validate the porous medium approach. Using the analytical solutions, parameters of engineering importance are identified and their effects on fluid flow and heat transfer are studied. Also, the expression fur total thermal resistance is derived from the analytical solutions and minimized in order to optimize the thermal performance of the internally finned tubes.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권4호
• /
• pp.309-332
• /
• 2016

Finite element method has been applied to solve the fundamental governing equations of natural convective, electrically conducting, incompressible fluid flow past an infinite vertical plate surrounded by porous medium in presence of thermal radiation, viscous dissipation, Soret and Dufour effects. In this research work, the results of coupled partial differential equations are found numerically by applying finite element technique. The sway of significant parameters such as Soret number, Dufour number, Grashof number for heat and mass transfer, Magnetic field parameter, Thermal radiation parameter, Permeability parameter on velocity, temperature and concentration evaluations in the boundary layer region are examined in detail and the results are shown in graphically. Furthermore, the effect of these parameters on local skin friction coefficient, local Nusselt number and Sherwood numbers is also investigated. A very good agreement is noticed between the present results and previous published works in some limiting cases.