• Steel and Composite Structures
• /
• 제43권1호
• /
• pp.117-127
• /
• 2022

This study investigates the wave propagation in porous functionally graded (FG) sandwich plates subjected to hygrothermal environments. A new simple three-unknown first-ordershear deformation theory (FSDT) incorporating an integral term is utilized in this paper. Only three unknowns are used to formulate the governing differential equation by applying the Hamilton principle. The FG layer of the sandwich plate is modeled using the power-law function with evenly distributed porosities to represent the defects of the manufacturing process. The plate is subjected to nonlinear hygrothermal changes across the thickness. The effects of the power-law exponent, core to thickness ratios, porosity volume, and the relations between volume fraction and wave properties of porous FG plate under the hygrothermal environment are investigated. The results showed that the waves' phase velocities increase linearly with the waves number in the FGM plate. The porosity of the FG materials plate has a noticeable impact on the phase velocity when considering the high ratios of the core layer. It has a negligible effect on small core layers. Finally, it is observed that changing temperatures and moistures do not influence the relationship between the power law and the phase velocity.

• 대한기계학회논문집
• /
• 제9권2호
• /
• pp.158-173
• /
• 1985

본 연구에서는 상호작용상류의 난류경계층에 분출을 가해서 경계층을 불안정 화시키고 이 불안정화된 난류경계층과 사각입사충격파와의 상호작용을 실험적으로 연 구하였다. Squire-Smith와는 다른 실험모형의 새로운 형태를 제시하였고 상호작용영 역에서 경계층의 압력분포 및 속도분포를 측정해서 충격파반사의 형태를 밝혔다.

• 전기화학회지
• /
• 제5권3호
• /
• pp.125-130
• /
• 2002

다공성 그물구조 금속을 반도체 칩 방열재료로써 활용하기 위한 실험을 실시하였다. 이를 위해 다공성 그물구조 구리와 반도체 칩 사이의 열팽창 차이를 최소화하기 위한 시도로써 다공성 구리에 대한 Fe/Ni 합금전착을 수행하였다. Fe/Ni 합금전착 실험으로 표준 Hull Cell을 구성하고 전류밀도 분포에 따른 Fe/Ni 합금층 내의 조성변화를 관찰하였으며, 실험결과 합금전착시 이상공석현상으로 인하여 전해액의 교반정도에 따라 합금층 조성이 크게 영향을 받는 것으로 나타났다. 본 실험에서는 paddle type 교반기를 사용하여 전해질의 확산을 제어하는 방법으로 원하는 조성의 Fe/Ni 합금층을 얻을 수 있었으며, 얻어진 Fe/Ni 후막을 대상으로 TMA 열분석을 실시한 결과 구리에 비해 훨씬 낮은 열팽창율을 보이는 것으로 나타났다. 또한, 본 실험에서 Fe/Ni 합금전착을 통하여 제작한 다공성 그물구조 금속을 대상으로 방열성능을 측정한 결과 구리 평판 대비 최대 2배 이상의 방열성능을 보여 반도체 칩 방열재료로의 활용 가능성을 높여 주었다.

• 멤브레인
• /
• 제22권1호
• /
• pp.8-15
• /
• 2012

다공성 $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$로 코팅된 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 관형 분리막은 압출성형 및 dip coating 방법으로 제조 되었다. 코팅된 관형 분리막의 특성은 X-선 회절분석기(XRD)와 전자 주사 현미경(SEM)을 이용하여 분석하였으며, 분석결과 $2{\mu}m$의 다공성 코팅 층을 갖는 페롭스카이트 구조임을 알 수 있었다. 산소투과량 분석은 $750{\sim}950^{\circ}C$ 범위에서 공급측과 투과 측을 대기 중 공기와 진공으로 하여 수행되었다. 다공성의 $La_{0.6}Sr_{0.4}Ti_{0.3}Fe_{0.7}O_{3-{\delta}}$로 코팅된 $Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-{\delta}}$ 관형 분리막의 산소투과량은 $950^{\circ}C$에서 $3.2mL/min{\cdot}cm^2$로 코팅되지 않은 분리막보다 높게 나타났으며, 11일 동안의 장기 안정성 실험결과 코팅 층에 의해 안정성이 증가됨을 알 수 있었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1988년도 전기.전자공학 학술대회 논문집
• /
• pp.781-784
• /
• 1988

The formation and properties of porous silicon layer(PSL) formed by anodic reaction in hydrofluoric acid solution have been studied. Many micropores are formed randomly inside of PSL and the anodization is achieved uniformly-toward the thickness direction. Current density, resistivity and HF concentration in P-type PSL formation are found to play important roles in determining the formation and properties of PSL.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2006년도 추계학술발표대회 및 제11회 신소재 심포지엄
• /
• pp.16.2-16.2
• /
• 2006

• 기계저널
• /
• 제16권1호
• /
• pp.49-53
• /
• 1976

Groundwater flow in a two-layer aquifer is studied theoretically and experimentally. Nonlinear differential equations are independently linearized for the upper and the lower layer, and approximate solutions are obtained. Fine sands and coarse sands are used in experiments. For steady flow, theoretical solutions agrees excellently with experimental results For unsteady flow, however, agreement is not so good, because the experimental conditions do not match with theoretical assumptions.

• Steel and Composite Structures
• /
• 제50권2호
• /
• pp.123-133
• /
• 2024

The paper deals with the propagation of Rayleigh waves in a nonlocal thermoelastic isotropic layer which is lying over a nonlocal thermoelastic isotropic half-space under the purview of Green-Lindsay model and Eringen's nonlocal elasticity in the presence of voids. The normal mode analysis is employed to the considered equations to obtain vector matrix differential equation which is then solved by eigenvalue approach. The frequency equation of Rayleigh waves is derived and different particular cases are also deduced. The effects of voids and nonlocality on different characteristics of Rayleigh waves are presented graphically.

• 한국세라믹학회지
• /
• 제31권8호
• /
• pp.927-933
• /
• 1994

Alumina composite membranes were prepared by chemical vapor deposition (CVD) using aluminum-tri-isopropoxide as a precursor. Porous alumina supports were used in deposition, which were in disk shape with mean pore diameter of 0.1 ${\mu}{\textrm}{m}$ and prepared by slip-coasting process. film deposition morphology on porous support was simulated through depositing alumina film on polycrystalline silicon pattern, and its step coverage observed by SEM showed one deviated from uniform step coverage. N2 permeability through composite membranes and the pressure dependence decreased as the deposition time increased. Initially, the N2 permeability of the top layer was tend to decrease rapidly, and then the degree of decrease in N2 permeability was tend to diminish with deposition time. The N2 permeability increased with heat treatment temperature and the crack was generated in top layer at 100$0^{\circ}C$.

• 한국전산유체공학회지
• /
• 제10권1호
• /
• pp.80-86
• /
• 2005

In order to control the transonic flow field with a shock wave, a condensing flow was produced by an expansion of moist air on a circular bump model and shock waves were occurred in the supersonic parts of the fields. Furthermore, the additional passive technique of shock-boundary layer interaction using the porous wall with a cavity underneath was adopted in this flow field. The effects of these methods on the shock wave characteristics were investigated numerically. The result showed that the flow fields might be effectively controlled by the suitable combination between non-equilibrium condensation and the position of porous wall.