• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.365-372
• /
• 2010

Low-fat sausages were prepared with various meats to investigate the effect of the addition of oatmeal at 10% as a fat substitute. The sausages were made with beef, pork and chicken after trimming the visible fat, and the physical and sensory properties of the sausages were evaluated. Beef sausage had the lowest cooking yield and the highest hardness, while chicken sausage showed the opposite properties. The addition of oatmeal resulted in sausage products with less cooking loss and softer texture for all types of meat sausages. Such changes were more pronounced for beef low-fat sausage than for the other types of sausages. The results of moisture absorption suggested that the difference in cooking yield and hardness among sausage products was due to the water-retention properties of different meats and the substitute in response to heat treatment. Sensory evaluation indicated that the greatest overall acceptability of the sausage products were obtained from 10% oatmeal-added pork sausage and that the addition of oatmeal led to better acceptability for all types meat sausages.

• Food Science of Animal Resources
• /
• v.31 no.3
• /
• pp.372-380
• /
• 2011

This study was conducted to assess meat quality and sensory properties of pork bellies from immunocastrated males (IC) compared to meat from surgically castrated males (SC), intact males (IM), and females (FE). Pork bellies from IC had significantly higher pH values than meat from either SC or FE. Pork bellies from IC showed lower CIE $L^*$ values than those from SC, but were redder (higher CIE $a^*$ values) than meat from SC or FE. However, no differences in visual color were observed between pork bellies from IC and SC pigs using National Pork Producer Council scales. Water holding capacity was higher in SC and FE than that in IC. IC showed no significant difference in cooking loss and shear force values compared with those of SC. Both SC and IC had improved fat content when compared to that in IM, and IC meat showed a similar fat content to that of FE. Pork bellies from IC showed higher ratings for all visual evaluation traits than those of SC and were the same as meat from FE. Boar odor was not significantly different among the treatments. IC was rated similar to SC for taste, tenderness, and overall acceptability.

• Journal of the East Asian Society of Dietary Life
• /
• v.26 no.3
• /
• pp.230-236
• /
• 2016

The study was carried out to evaluate the quality of commercial pork and beef jerky at a market in Korea. The amount of food additives, place of origin, meat content, microbiological and physicochemical characteristics were investigated in 46 different jerky samples. Meat contents of pork and beef jerky were 75.2~94.0% and 80.0~95.6%, respectively. Food additives, including sodium nitrite, potassium sorbate, and sodium erythorbate were mainly used in jerky. Pork jerky was processed from domestic pork, and beef jerky was mostly processed from imported beef from the USA, Australia, or New Zealand. Pork jerky contained $23.82{\pm}5.74%$ moisture, $37.86{\pm}7.05%$ crude protein, $6.16{\pm}4.91%$ crude fat, and $4.6.87{\pm}1.76%$ crude ash. Beef jerky contained $26.64{\pm}5.21%$ moisture, $41.36{\pm}3.50%$ crude protein, $4.67{\pm}3.46%$ crude fat, and $7.21{\pm}1.91%$ crude ash. Water activity (Aw) of pork jerky was $0.73{\pm}0.09$ while that of beef jerky was $0.78{\pm}0.08$. Volatile basic nitrogen (VBN) content to jerky was 7.1~36.0 mg/100 g. There was no significant difference in the physicochemical composition of meat type (p<0.05). Coliform, Escherichia coli and Staphylococcus aureus were not detected in pork or beef jerky, whereas yeast and molds were detected below $1.2{\times}10^1CFU/g$ in beef jerky samples.

• Journal of Animal Science and Technology
• /
• v.65 no.2
• /
• pp.412-426
• /
• 2023

Currently, pigs breed in Korea are LYD (Landrace × Yorkshire × Duroc) crossbred pigs. Pigs used as fresh meat are gilts and barrows. However, the current supply of pork is not satisfying Korean consumers. In addition, the comparison of carcasses between gilts and barrows only studies carcass weight, backfat thickness, or meat quality, and there are very few studies comparing carcass characteristics. The purpose of this study was to compare characteristics of 7 primal cuts of gilts and barrows as measured by AutoFom III. A total of 350,179 pigs were used, including 176,461 gilts and 173,718 barrows. Characteristics of seven primal cuts were measured using AutoFom III. In the case of carcass weight, there was no significant difference in grade 1+. For all other survey items except for grade 2, gilts showed significantly (p < 0.05) higher values. For all grades except for pork belly, amounts of the remaining six primal cuts were higher in gilts (all p < 0.05,). In addition, the ratio of intermuscular fat in the pork belly of barrows showed a higher value than that in the pork belly of gilts (p < 0.05). The amount of pork belly, which is the most popular among consumers in Korea, not only produced more production than gilts in barrows, but also showed a higher value than gilts in barrows for the ratio of intermuscular fat affecting taste. In summary, gilts produced higher yields than barrows in all parts except pork belly. For the production of only pork belly, barrows showed higher production than gilts.

• 축산식품과학과 산업
• /
• v.7 no.2
• /
• pp.74-83
• /
• 2018

• Food Science of Animal Resources
• /
• v.23 no.2
• /
• pp.103-108
• /
• 2003

The effect of fat content, thickness, and storage temperature and period of fresh meat samples on the migration of di-(2-ethylhexyl) adipate(DEHA) from plasticized PVC film was investigated. Pork samples were prepared to have different fat contents by mixing with pork loin and pork backfat and stored at 5$^{\circ}C$ for 2 d. The migration values of DEHA into the pork samples were increased with a high fat content. There was a gradual increase in the DEHA concentration as a function of prolonged exposure period and elevated storage temperature when the pork samples were stored at -2, 5 and l0$^{\circ}C$ for up to 7 d, respectively. The migration of DEHA into fresh pork and beef was limited only to a small depth under the meat surface($\leq$2 cm). The migration value was higher when the pork belly was wrapped double with plasticized PVC film compared to once after storage at 5$^{\circ}C$ for 3 d. However, when the samples was minced and repacked with new film after 2 d, and kept for a further 1 d, these showed lower migration value compared to the above two intact samples. Migration values exceeded in most cases the upper limit for DEHA migration proposed by the EU(18 mg/kg or 3 mg/d㎡), even though no limitation is currently set in Korea.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.7
• /
• pp.905-910
• /
• 2013

This study was performed to determine the influence of pig breed and gender on the ultimate pH and physicochemical properties of pork. The correlations between pH and pork quality traits directly related to carcass grade, and consumer's preference were also evaluated. The pH and meat grading scores for cold carcasses of 215 purebred pigs (Duroc, Landrace, and Yorkshire) from four different farms were obtained. Meat quality parameters of the pork loin were analyzed. Duroc and female animals were more affected compared to other breeds and male pigs. Duroc animals had the highest ultimate pH, carcass back fat thickness, marbling scores, yellowness, and fat content (p<0.05). Landrace pigs had the highest color lightness and cooking loss values (p<0.05). Among all trait parameters, marbling scores showed the highest significant differences when evaluating the impact of breed and gender on meat quality characteristics (p<0.001). Ultimate pH was positively correlated with carcass weight (0.20), back fat thickness (0.19), marbling score (0.17), and color score (0.16) while negatively correlated with cooking loss (-0.24) and shear force (-0.20). Therefore, pork samples with lower ultimate pH had lower cooking loss, higher lightness, and higher shear force values irrespective of breed.

• Korean Journal of Food Science and Technology
• /
• v.32 no.1
• /
• pp.62-68
• /
• 2000

Effects of conjugated linoleic acid (CLA) on physico-chemical properties of cooked ground pork patty were investigated for 11 days at $4^{\circ}C$. Pork patties containing 0, 1, 2, and 3% CLA were cooked at $90^{\circ}C$ for 30 min. The contents of crude protein and fat did not change whereas the content of ash and water decreased as the level of CLA enhanced. Lipid oxidation as measured by thiobarbituric reactive substances of patty was inhibited by addition of CLA. CLA treatment also reduced nitrite and cholesterol content and changed fatty acid composition. Consequently, given these positive effects of CLA, it may be assumed that CLA could be used as a fat additive for value-added pork patty.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.2
• /
• pp.231-234
• /
• 2000

To evaluate the effect of frying times on the oxidative stability of soybean oil and shortening, they were reused up to 10 times and measured by thiobarbituric acid(TBA) value, acid value(AV), peroxide value(POV) and sensory evaluation. As the reusing time was increased, TBA value of "battered pork" fried with shortening showed more sharply increased than that with soybean oil, while the value of shortening, itself, showed more decreased than that of soybean oil. In frying fat, AV and POV increased with the increase of reusing times. Compared with soybean oil, shortening had rapidly increased for POV as reusing time was increased. Among the sensory analyses TBA of "battered pork" with soybean oil and shortening exhibited the highest correlation with flavor and texture, respectively. For the "batgtered pork" fried with soybean oil and shortening, reusing shelf-lives predicted were approximately 9 and 8 times, respectively.

• Food Science of Animal Resources
• /
• v.23 no.4
• /
• pp.321-326
• /
• 2003

The objectives of this study were to develop restructured meat products(RMPs) using a transgluta-minase(TGase) and to improve the textural characteristics of RMPs manufactured with pale, soft, exudative(PSE) pork hams. The pH values of RMPs with PSE and normal pork were 5.94 and 6.07, respectively, and their water activity value was approximately 0.981. The RMPs had 70∼72％ moisture, 4∼5％ fat, 19∼20％ protein, and approximately 3％ ash contents. No differences in pH, water activity, chemical composition, and hunter color values were observed between RMPs manufactured with normal and PSE pork(p＞0.05). However, RMPs containing PSE pork hams had higher drip loss(％)(p＞0.05) than those with normal pork hams after 10 days of refrigerated storage. Although no differences were observed in the texture profile analysis(TPA) hardness and sensory evaluation, RMPs with PSE pork hams tended to have more pores and lower binding capacity those with normal pork. This result indicated that additional substrates or longer tumbling time(＞4 hr) for the manufacture of RMPs containing PSE pork were required for the products to have similar palatability to those with normal pork.