• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.193-194
• /
• 2005

By the high-temperature pad conditioning process: The slurry residues in pores and grooves of the polishing pad were clearly removed. These clear pores and enlarged grooves made the slurry attack the oxide surface. The changed slurry properties by high-temperature pad conditioning process made the oxide surface hydro-carbonate to be removed easily.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1996.04b
• /
• pp.13-19
• /
• 1996

The tribological properties of the aluminum short fiber and glass fiber reinforced tin-bronze matrix composites manufactured by vacuum hot pressing was studied. The effect of the composition and the relative density on the wear properties was examined by a reciprocal type tribo-test machine. The results were discussed by the observation of the microstructure of sintered specimen and worn surface observation using SEM and EDS. Addition of the fibers led to the wear resistance since the metal matrix was reinforced by the fibers. The reinforcement of the fiber seemed to be stronger as the distribution of the fibers was more uniform. Graphite also reduce the wear loss. The pores in the sintered composites seemed to play an important role to improve the wear resistance since the pores provide the places where the solid lubricants locate.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.05a
• /
• pp.79-83
• /
• 2008

We carry out three-dimensional simulation of pore closing processes during upsetting in open die forging. Several pores on a plane section of a cylindrical material are traced at the same time and the results of hydrostatic pressure and effective strain are discussed to reveal the parameters affecting pore closing phenomena. Five different sizes of pores are also investigated by simulation to reveal the pore size effect in pore closing during upsetting. AFDEX 3D is employed for this study.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.5
• /
• pp.32-37
• /
• 2004

Polishing processes are widely used in the glass, optical, die and semiconductor industries. Chemical Mechanical Polishing (CMP) especially is becoming one of the most important ULSI processes for the 0.25m generation and beyond. CMP is conventionally carried out using abrasive slurry and a polishing pad. But the surface of the pad has irregular pores, so there is non-uniformity of slurry flow and of contact area between wafer and the pad, and glazing occurs on the surface of the pad. This paper introduces the basic concept and fabrication technique of the next generation CMP pad using micro-molding method to obtain uniform protrusions and pores on the pad surface.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.4
• /
• pp.289-296
• /
• 2001

Ni-P electroformed layers were investigated for developing a steam generator tube repair technology in PWRs. The effects of an additive, RPP (Reagent over Pitting Protection) and agitation on mechanical properties and microstructure of the layer were evaluated. The addition of the RPP showed to inhibit the formation of pores, to refine the grain size, and to increase the residual stress in the layer. However, the agitation of the solution during electroforming was observed to increase pores in local regions of the electroformed layer, resulting in decreasing its mechanical properties. The heat treatment of the layer at $343^{\circ}C$ for 1 hr. precipitated the very fine particles of Ni3P in the layer, which inhibited grain growth and increased microhardness.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.12
• /
• pp.1167-1172
• /
• 1995

A coverage of about 1 μm-sized pores of a membrane filter by four monolayers of maleic acids copolymers and poly(allylamine) (PAA) was attained by Langmuir-Blodgett (LB) technique through a covalent cross-linking followed a polyion complexation at the air-water interface. The copolymers were prepared to have side chains of hydrocarbon tail, carboxyl, and/or oligoether in the repeat unit. The surface pressure-area isotherms showed that the monolayers on an aqueous PAA have more expanded area than on pure water. The monolayers were transferable on a calcium fluoride substrate and a fluorocarbon membrane filter as Y deposition type, and the resulting LB films were characterized by FT-IR spectroscopy and scanning electron microscopy. A polymer network produced through interchain amide formation was confirmed in as-deposited films. The films were heat-treated in order to complete the cross-linking. SEM observation of the heat-treated film on a porous membrane filter showed that the four layer film was sufficiently stable to cover the filter pore of about 1 μm. Immersion of the film in water or in chloroform did not cause any change in its appearance on SEM and in FT-IR spectra.

• Journal of Wellbeing Management and Applied Psychology
• /
• v.4 no.3
• /
• pp.39-44
• /
• 2021

Purpose: In this study, skin and lotion containing 10% FRO were prepared to compare the skin improvement effects. Research design, data and methodology: After using cosmetics containing FRO ingredients, analysis was performed for 6 weeks. Results: As a result of measuring the moisture and elasticity of the pores, significant results were obtained only in the pores when used for 2 weeks between the experimental group and the control group (p<.001). Also after 4 weeks of use, moisture (p<.05) showed significant results, and after 6 weeks of use, moisture (p<.01) and elasticity (p<.001) showed significant.

• Mycobiology
• /
• v.49 no.3
• /
• pp.213-222
• /
• 2021

Two new species of Fulvifomes are described from specimens collected in rainforests of Nonggang Nature Reserve of southern China, based on morphological characteristics and molecular phylogenetic analysis of the internal transcribed spacer (ITS) and nuclear large subunit ribosomal DNA (nLSU) sequences. Fulvifomes nonggangensis sp. nov. is characterized by perennial, sessile and solitary basidiocarps, applanate pileus, small cystidioles of 9.9-15.4 × 2.9-3.5 ㎛, large pores of 5-6 per mm, a dimitic hyphal system, and broadly ellipsoid basidiospores of 4.3-5.3 × 3.3-4.2 ㎛. F. tubogeneratus sp. nov. is characterized by perennial, sessile, and imbricate basidiocarps, a duplex context, small pores of 7-8 per mm, a dimitic hyphal system, and ovoid to subglobose basidiospores of 5.72 × 5.00 ㎛.

• Structural Engineering and Mechanics
• /
• v.70 no.1
• /
• pp.97-112
• /
• 2019

Using the classical, first order and third order shear deformation plates theories the motion equations of an undrained porous FG circular plate which is located on visco-Pasternak elastic foundation have been derived and used for free vibration analysis thereof. Strains are related to displacements by Sanders relationship. Fluid has saturated the pores whose distribution varies through the thickness according to three physically probable given functions. The equations are discretized and numerically solved by the generalized differential quadrature method. The effect of porosity, pores distribution, fluid compressibility, viscoelastic foundation and aspect ratio of the plate on its vibration has been considered.

• Smart Structures and Systems
• /
• v.23 no.5
• /
• pp.429-447
• /
• 2019

The present study analyzed free vibration of the three-layered micro annular/circular plate which its core and face sheets are made of saturated porous materials and FG-CNTRCs, respectively. The structure is subjected to magneto-electric fields and magneto-electro-mechanical pre loads. Mechanical properties of the porous core and also FG-CNTRC face sheets are varied through the thickness direction. Using dynamic Hamilton's principle, the motion equations based on MCS and FSD theories are derived and solved via GDQ as an efficient numerical method. Effect of different parameters such as pores distributions, porosity coefficient, pores compressibility, CNTs distribution, elastic foundation, multi-physical pre loads, small scale parameter and aspect ratio of the plate are investigated. The findings of this study can be useful for designing smart structures such as sensor and actuator.