• 한국지반공학회논문집
• /
• 제27권11호
• /
• pp.93-101
• /
• 2011

X-ray micro-CT를 이용한 지반재료 내부 미세구조 및 공극구조의 정밀한 이미지 처리는 종종 이미지 내에 원천적으로 포함되는 화상결함으로 인해 제약된다. 본 논문에서는 X-ray micro-CT 이미지에 가장 일반적으로 나타나는 화상결함인 패임(영상 외곽과 중심부의 명암 차이) 및 동심원상(영상 중심으로부터 방사방향으로 연속적으로 나타나는 원)을 제거할 수 있는 이미지 보정 기법을 제시한다. 결함 제거는 좌표 변환법, 정규화 및 2차원 푸리에 변환에 의한 저역 통과 필터링 기법의 순차적 적용을 통해 이루어진다. 이미지 처리 기법의 효과를 다공성 현무암의 CT 이미지에서 화상결함들을 제거하고 이진화 후 적층하여 3차원 공극 구조를 추출하는 과정을 통해 설명하였다. 패임 및 동심원상 결함을 제거한 이미지와 원본 이미지의 비교 결과 결함 제거는 대상 재료 공극률의 과대평가를 방지할 수 있으며, 따라서 화상결함의 적절한 보정은 X-ray CT의 지반재료 적용 시 필수적인 과정으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제23권3호
• /
• pp.82-87
• /
• 1995

Anatomical characteristics of genus Platycarya, Juglans and Pterocarya of Juglandaceae occurring in Korea were described and coded based on the IAWA list. Juglandaceae are ring-porous or semi-ring-porous. Vessels have simple perforation plates and helical thickenings in some genus. Axial parenchyma cells were abundant, most apotracheal but rarely paratracheal and rays with 1-5 seriate. Platycarya is ring-porous wood with 2-3 rows of vessels in the pore zone. Helical thickenings were found only in small vessel of latewood. Axial parenchyma were commonly diffuse-in-aggregates or vasicentric. Rays 3-5 seriate. belonging to Kribs' heterogeneous II or III type with frequent occurrence of rhomboidal crystals. Juglans are semi ring-porous with few vessels in $mm^2$ and pores are commonly solitary. Axial parenchyma were diffuse-in-aggregate or marginal. Rays were mostly homocellular and 3-5 seriates. Pterocarya is similar to Juglans in anatomical features but the reticulate parenchyma consisting of 1 layer on transverse section and biseriate rays.

• 대한치과기공학회지
• /
• 제2권1호
• /
• pp.21-24
• /
• 1980

This experiment was intended to obtain a prefect casting body the same as the original wax patterns by melting metal into the opening of the ring. The investment ring was dried to the temperature between 600 and 700, when the wax pattern would be completely melted to leave an empty mould made in the ring. The main point to studied was the investing process for perfect casting body. This process was experimented on several important factors: the size and spatulation of investment particles, purity of wax patterns, investing time after the completion of model, and investing temperature. The results obtained from the above experiment were as follows: A desirable cast body with no fissure or pore would be mode by investing with smaller particles in the first time and with larger onces in the second, both at the temperature between 180.

• 대한치과기공학회지
• /
• 제30권1호
• /
• pp.9-15
• /
• 2008

An investigation was carried out to examine the pores of casting bodies depending on the position of wax pattern in the ring for precious alloy by optical micrographs. From the result of optical micrographs, many pores were found in the Group C that wax pattern is placed in the center of the ring. However, any pores were scarcely found in the Group A, B, D and E that wax patterns are placed out of the center of thermal zone. In comparison with the pores of casting bodies of Group C, many pores were found at the cusp area rather than at the proximal surface. From these examination, it was concluded that wax pattern should be placed out of the center of thermal zone to prevent casting boies from occurring pores.

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.1-13
• /
• 1987

This study was carried out to investigate the variations of dimension and exterior shape of vessel elements, morphology of spiral thickening and ray-vessel pit in korean diffuse-porous woods (56 species, 18 families), The tangential pore diameter and vessel element length was increased, whereas the pore number per unit area($1mm^2$) was decreased from pith outwards. The tangential pore diameter was decreased but the length of vessel element was not changed from earlywood to latewood within an annual ring. However, the dimensional variations of vessel element was not able to be recognized among relative positions in peripheral variation. The exterior shape of vessel element could be classified into four types; Type 1 is without tail, Type 2 with ligulate tail, Type 3 with broad taper tail and Type 4 with the very short length between perforations. The distribution frequency of Type 2 and 3 was relatively high in comparision with the others. According to the prominence, distribution position and branched shape, the spiral thickenings could be divided into five types. The spiral thickenings occurred 52% in the species observed. Thus it was doubtful to consider the simple presence of spiral thickening as diagnostic index in diffuse-porous woods. The morphology of ray-vessel pit could be grouped as reticulate, scalariform, oval, linear and coalescent type. Most of species examined showed oval and linear type.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
• /
• pp.207-210
• /
• 2004

The pore-filled anion-exchange membranes were prepared in this study with an asymmetric poly(vinylidene fluoride)(PVDF) membrane as a nascent membrane and poly(vinylbenzyl chloride)(PVBCl) as a polyelectrolyte. The solution of PVBCI having the chloromethylate aryl ring of 80 percents and 1,4-diaminobicyclo [2,2,2]octane(DABCO) was made with the solvent of tetrahydrofuran(THF) and N,N-Dimethylformamide(DMF), which is in the rotio of 8:2. A new preparation method in this study, i.e. in-situ crosslinking, enabled us to produce the pore-filled membranes without change of size, and to control the properties of final membrane with various degree of cross-linking. From the result of surface morphologies of SEM and AFM the polyelectrolyte exists in the pores of nascent membrane as a certain configuration. From the investigation of the solvent affecting much to the permeability and rejection, it was found. that the membranes using DMF and THF showed better performances than the membranes produced by THF only. The water permeability of the final membrane at low pressure(100㎪) showed a typical ultrafiltation membrane's permeability (8-10kg/㎡hr) and good values of rejection(55∼60 percent).

• Carbon letters
• /
• 제4권1호
• /
• pp.1-9
• /
• 2003

Recently, the control of pore-characteristics of nano-porous materials has been studied extensively because of their unique applications, which includes size-selective separation, gas adsorption/storage, heterogeneous catalysis, etc. The most widely adopted techniques for controlling pore characteristics include the utilization of pillar effect by metal oxide and of templates such as zeolites. More recently, coordination polymers constructed by transition metal ions and bridging organic ligands have afforded new types of nano-porous materials, porous metal-organic framework(porous MOF), with high degree and uniformity of porosity. The pore characteristics of these porous MOFs can be designed by controlling the coordination number and geometry of selected metal, e.g transition metal and rare-earth metal, and the size, rigidity, and coordination site of ligand. The synthesis of porous MOF by the assembly of metal ions with di-, tri-, and poly-topic N-bound organic linkers such as 4,4'-bipyridine(BPY) or multidentate linkers such as carboxylates, which allow for the formation of more rigid frameworks due to their ability to aggregate metal ions into M-O-C cluster, have been reported. Other porous MOF from co-ligand system or the ligand with both C-O and C-N type linkage can afford to control the shape and size of pores. Furthermore, for the rigidity and thermal stability of porous MOF, ring-type ligand such as porphyrin derivatives and ligands with ability of secondary bonding such as hydrogen and ionic bonding have been studied.

• 한국지반환경공학회 논문집
• /
• 제20권1호
• /
• pp.67-74
• /
• 2019

동상은 동토지역에서 발생하는 대표적인 공학적 특성이다. 계절동토(seasonal frost area)에 해당하는 우리나라는 동결융해에 의한 구조적 피해가 발생하고 동상에 관한 연구의 필요성이 증대되고 있는 실정이다. 본 논문에서는 새롭게 개발한 투명 온도제어형 셀을 활용하여 동상에 관한 연구를 수행하였다. 동상에 민감한 흙을 인공적으로 조성하여 동상민감성 판정에 있어 중요한 인자 중 하나인 물 주입속도(water intake rate)에 관한 분석을 실시하였다. 간극수 동결에 의한 부피팽창(heave by pore water)이 수렴하는 시점 이후에 동상속도(frost heave rate)와 물 주입속도는 거의 유사하게 나타났다. 그러나 물 주입속도를 측정하기 위해 상부 페더스탈에 설치한 O-ring은 몰드 내벽과의 마찰을 발생시켜 동상발생을 저하시켰다. 따라서 물 주입속도를 활용한 동상민감성 판정 기준은 신뢰하기 힘들다고 판단되었으며, 유사한 거동을 보이는 동상속도를 활용하는 것이 적절하다는 결론을 내렸다. 또한, 동상민감성 흙을 활용해 시료크기가 동상에 미치는 영향을 파악하고자 하였다. 시료크기가 다른 2가지 경우에 대해 동상시험을 수행하였으며 상재하중, 온도구배, 그리고 건조단위중량을 동일하게 설정하였다. 실험결과를 토대로 시료크기는 동상에 영향을 미치지 않는다는 것을 발견하였다.

• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.333-344
• /
• 2013

본 연구에서는 절리 암반 내 터널굴착 시 지하수 유출량 예측량이 실제 계측치와 큰 차이가 나는 이유 중 하나인 터널주변 절리암반의 투수계수의 감소 현상에 대해 논의하였다. 현재 터널 설계 시 일반적으로 사용되고 있는 지하수 유출량 산정식은 터널주변 암반이 등방, 균질하고 일정한 투수계수를 유지한다고 가정한다. 하지만, 실제로는 터널주변 절리암반의 투수계수는 터널주변 유효응력 상태에 따라 변화하며, 절리 내 지하수 흐름에 따라 다시 터널주변 유효응력 분포가 영향을 받는 수리-역학적 상호거동을 보인다. 터널굴착 직후 터널 접선방향 유효응력이 응력집중과 간극수압 감소로 인해 급증하고 그에 따라 절리의 닫힘현상이 발생하며, 결과적으로 터널인접 절리암반 링 구간에서 투수계수가 급격히 감소하게 된다. 이러한 터널인접 링 구간 내에서 상당히 큰 간극수압 감소가 발생하게 되어 터널주변 간극수압 분포는 등방 균질의 절리암반으로 가정한 산정식과 큰 차이를 보인다. 본 연구에서는 절리암반의 수리-역학적 상호거동의 개념을 도입하여 터널주변 간극수압 분포와 터널 내 지하수 유입량 산정방법을 제안하고 이를 수치해석을 통해 검증하였다.

• Bulletin of the Korean Chemical Society
• /
• 제30권2호
• /
• pp.389-396
• /
• 2009

MFI structural zeolite (ZSM-5 or Sililcalite) was treated with HF solution to introduce mesoporous channels in the microporous crystals. Inner mesopore size could be controlled from 2.5 to 3.5 nm by changing the concentration of HF solution. The pore structure of HF-treated MFI zeolite was studied by instrumental analysis. The active Co (III) salen complex monomers were successfully anchored non-covalently on the surfaces of mesoporous MFI-type zeolite. These heterogeneous catalysts could be applied in asymmetric ring opening of terminal epoxides by phenol derivatives. It showed very high enantioselectivity and yield up to 95% in the catalytic synthesis of optically active $\alpha$-aryloxy alcohol compounds.