• BMB Reports
• /
• 제44권11호
• /
• pp.719-724
• /
• 2011

The $Sec61{\alpha}$ subunit is the core subunit of the protein conducting channel which is required for protein translocation in eukaryotes and prokaryotes. In this study, we cloned a $Sec61{\alpha}$ subunit from Penicillium ochrochloron ($PoSec61{\alpha}$). Sequence and 3D structural model analysis showed that $PoSec61{\alpha}$ conserved the typical characteristics of eukaryotic and prokaryotic $Sec61{\alpha}$ subunit homologues. The pore ring known as the constriction point of the channel is formed by seven hydrophobic amino acids. Two methionine residues from transmembrane ${\alpha}$-helice 7 (TM7) contribute to the pore ring formation and projected notably to the pore area and narrowed the pore compared with the superposed residues at the corresponding positions in the crystal structures or the 3D models of the $Sec61{\alpha}$ subunit homologues in archaea or other eukaryotes, respectively. Results reported herein indicate that the pore ring residues differ among $Sec61{\alpha}$ subunit homologues and two hydrophobic residues in the TM7 contribute to the pore ring formation.

• Journal of the Korean Wood Science and Technology
• /
• 제9권3호
• /
• pp.1-6
• /
• 1981

This study examined the radial variations in element demensions of mongolian oak (Quercus mongolica.), elm (Ulmus japonica.), maackia(Maackia amurensis.), castor aralia (Kalopanax pictus.) from pith outwards. Disks were cut from the d.b.h.(above 1.2m) of each species and specimen for tangential pore diameters, fiber length, ray height and width were taken from 1-3rd, 5th, 10th, 15th.............40th ring number from pith. The tangential pore diameters in the earlywood increased rapidly near the pith and then maintained almost constant or very gradually increased diameters in about 20th-30th ring number from pith. In the latewood, tangential pore diameters gradually increased from pith to outwards though the increment is smaller than in early wood. Radial variations of ray height and width maintained almost constant, gradually increased or rapidly increased diameters and then maintained almost constant from pith to outwards. Patterns of radial variations in the fiber length were almost coincident with patterns of earlywood pore diameters, and of ray height or width in Ulmus japonica and Maackia amurensis.

• Journal of the Korean Wood Science and Technology
• /
• 제26권2호
• /
• pp.29-37
• /
• 1998

An image analysis program with the function of measuring various quantitative characteristics in the transverse surface of wood was developed using Delphi 2.0. Data on pore characteristics (conditions for image processing, proportion of pores in relationship to other elements, tangential diameter, area, tangential and radial diameter, x and y coordinates of pore center, and geometric coefficients) were saved in text file format. In addition, the pore area histogram in the tangential and radial directions was saved as a BMP (bitmap) type file. Analyses indicated that quantitative characteristics such as the relative radial distribution of pores in a growth ring, pore tangential area histogram, and proportion of pore in lumen area appear to be useful in separating four diffuse-porous woods and four ring-porous woods on the species level.

• 한국지반공학회논문집
• /
• 제20권6호
• /
• pp.5-10
• /
• 2004

일반적으로 일차원 압밀상태에 있는 정지토압계수 $K_0$값은 삼축시험에서 구해지지만, 압밀중의 간극수의 흐름이 방사류이고, 공시체의 변형이 3차원적이므로, 얻어진 값의 신뢰성에는 의문이 있다. 여기서는, 일차원 압밀시험기를 개량하여, 압밀링 중앙높이에 배치한 압밀링 요소를 토압감지부로 하며, 감지부 중앙에서는 간극수압을 측정하였다. 내경 6cm의 압밀링은 부동(浮動)링 형식으로 높이 4cm의 공시체 중앙높이가 항상 같은 위치를 유지하는 구조이다. 직경 6cm의 공시체와 샘플링후 시료변형을 고려한 압밀링 내경보다 직경이 약간 작은 공시체에서 얻은 압밀종료시의 $K_0$값은 공시체직경과 압밀압력에 상관없이 거의 0.5를 나타내었다.

• Journal of the Korean Wood Science and Technology
• /
• 제6권1호
• /
• pp.15-23
• /
• 1978

This report observed for anatomical structure and identified species of small wood debris collected at Chungi-Hyankyo, Yunbuk-Chung, Jeju-Hyankyo, Teachung-Hyangkyo and Kwanduk-Chung in Jeju province constructed in a central period of Yi-dynasty, and now named as local cultral assets. 1. Sample of Chungi-Hyangkyo is gymnosperm with window-like pit, axial and radial cannal & dentate ray tracheid. This sample with identified with Pinus densiflora or Pinus thunbergii. 2. Samples of Yunbuk-Chung and Jeju-Hyangkyo are diffuse porous wood having small vessels with scalariform perforation plates scattered almost equally in annual ring, possess heterogenus ray parenchyma & banded apotracheal parenchyma. This sample is identified with Distylium racemosum. 3. Sample of Teachung-Hyangkyo is ring porous wood composed of big vessels of pore zone and compound vessels outside pore zone. It also has simple perforation plates, tylosis, homogenlls uniseriate ray parenchyma & diffuse parenchyma This sample is identified with Castanopsis cuspidata. 4. Sample of kwanduk-Chung is ring porous wood composed of big vessels of pore zone and compound vessels outside pore zone. It has simple perforation plates, heterogenus ray parenchyma, crystal, vasicentric parenchyma. This sample is identified with Zelkova serrata.

• 천문학회보
• /
• 제38권2호
• /
• pp.87.2-87.2
• /
• 2013

We studied a fine-scale half ring-like structure around a pore seen from the high spectral and the high spatial resolution data. Our observations were carried out using the Fast Imaging Solar Spectrograph (FISS) and the InfraRed Imaging Magnetograph (IRIM) installed at the 1.6 meter New Solar Telescope of Big Bear Solar Observatory (BBSO) on 2012 July 19. During the observations, we found a fine-scale half ring-like structure located very close to a pore (~0.4 arcsec apart from the pore). It was seen in the far wing images of the $H{\alpha}$ and Ca II $8542{\AA}$ lines, but it was not seen in the line center images of two lines. The length of the structure is about 4200 km and the width is about 350 km. We determined its line-of-sight velocity using the Doppler shift of the centroid of the Ti II line ($6559.6{\AA}$, close to the $H{\alpha}$ line) and determined horizontal velocity using the NAVE method. we also investigated the magnetic configurations using the Stokes I, Q, U, and V maps of the IRIM. As a results, we found that it has a high blue-shift velocity (~2km) faster than the photospheric features and has a strong horizontal component of the magnetic field. Based on our findings, we suggest that it is associated with small flux emergence, which occurs very close to the pore. Even though it is very small structure, this kind of magnetic configuration can be in chare of the upper chromosphere heating, especially above the pore.

• Journal of Forest and Environmental Science
• /
• 제9권1호
• /
• pp.10-18
• /
• 1993

북양산(北洋産) 주요(主要) 침(針), 활엽수재(闊葉樹材)의 물리적(物理的) 성질(性質)(밀도(密屠), 만재율(晩材率), 공권율(孔圈率), 평균년수폭(平均年輸幅))과 역학적(力學的) 성질(性質)(종압축강도, 횡압축강도, 전단강도에 관하여 연구(硏究) 조사하였다. 이 실험(實驗)의 연구(硏究) 결과(結果)는 다음과 같다. 밀도(密度)와 만재율(晩材率)은 물리적(物理的) 역학적(力學的) 성질(性質)과 밀접(密接)한 관계(關係)를 나타낸 반면, 공권율(孔圈率)과 평균년수폭(平均年輸幅)은 물리적(物理的) 역학적(力學的) 성질(性質)과 거의 관계(關係)가 없음을 나타내었다.

• 공업화학
• /
• 제31권4호
• /
• pp.383-389
• /
• 2020

프로필 술폰산으로 개질된 메조기공 실리카 고체 산 촉매를 octamethylcyclotetrasiloxane (D₄)의 양이온 개환중합을 위해 합성하였다. 서로 다른 기공 크기를 갖는 두 세트의 MCM-41 (1.7 및 2.8 nm) 및 SBA-15 (8.1 및 15.9 nm)을 촉매의 지지체로 사용하였고, 이를 (3-mercaptopropyl)trimethoxysilane으로 표면개질하고 산화시켜 술폰산으로 개질된 고체 산촉매를 제조하였다. 제조된 촉매는 기공 크기와 비표면적, 기공 부피가 약간씩 감소하였음을 X선 회절, 질소흡탈착을 통하여 확인하였다. 또한 적외선분광법과 핵자기공명법의 분광학적 방법을 이용하여 술폰산이 개질되었음을 확인하였다. 입도의 촉매 활성에 대한 효과를 관찰하기 위하여 주사전자현미경으로 관찰하였다. D₄의 개환중합을 통한 PDMS 합성을 위하여 촉매를 사용하였으며, 중합 반응의 전환율과 중합 속도는 촉매의 기공 크기, 비표면적, 입자크기 및 입자의 응집도에 의존하였다. 중합 속도의 순서는 8.1 nm의 SBA-15으로 제조한 촉매가 가장 반응속도가 빨랐으며, 가장 좋은 촉매 활성을 보였다.

• Bulletin of the Korean Chemical Society
• /
• 제25권3호
• /
• pp.351-356
• /
• 2004

Selected MPEG-b-PDLLA block copolymers have been synthesized by ring-opening polymerization with systematic variation of the chain lengths of the resident hydrophilic and hydrophobic blocks. The size and shape of the micelles that spontaneously form in solution are then controlled by the characteristics of the block copolymer template. All the materials prepared in this study showed the tunable pore size of 20-80 ${\AA}$ with the increase of hydrophobic chain lengths and up to 660 $m^2$/g of specific surface area. The formation mechanism of these nanoporous structures obtained by controlling the micelle size has been confirmed using both liquid and solid state $^{13}C\;and\;^{29}Si$ NMR techniques. This work verifies the formation mechanism of nanoporous structures in which the pore size and wall thickness are closely dependent on the size of hydrophobic cores and hydrophilic shells of the block copolymer templates.

• 멤브레인
• /
• 제14권2호
• /
• pp.108-116
• /
• 2004

본 연구에서는 비대칭 polyvinylidene fluoride (PVDF)막을 기질막으로 하여 Pore-filled 이온교환막을 제조하였다. 먼저 다공성 PVDF막의 기공에 80%의 chloromethylate aryl ring을 가지고 있는 poly(vinylbenzyl chloride) (PVBCI)과 1,4- diaminobicyclo［2,2,2］octane (DABCO)을 tetrahydrofuran (THF)와 dimethylforamide (DMF)가 8:2로 혼합된 용액에 녹여서 채워 넣고 겔화시킨 후, 남아 있는 chloromethyl group에 trirnethylamine (TMA, 40 wt% in water)을 이용하여 양이온 암모니움 site를 형성시키면 pore-filled 음이온교환막이 형성된다. 이와 같이 2단계의 제조 방식으로 제조된 pore-filled 막은 크기의 변화가 없으며, 가교도의 조절로써 최종 막의 특성이 간단하게 조절되는 것을 보여주었다. SEM과 AFM의 표면촬영의 결과로부터 기질막의 기공 내에 고분자겔의 존재를 확인하였다. 투과도와 배제율에 많은 영향을 미치는 용매를 조사한 결과 tetrahydrofuran (THF)만을 사용하여 제조한 막보다 THF와 DMF를 함께 사용할 때 더 우수한 막이 제조되었다. 제조된 최종 막의 수투과도 조사결과, 가교도 10% 막의 경우 아주 낮은 압력에서(100 Kpa) 전형적인 한외여과막의 투과도(8∼10 kg/$m^2$hr)를 보여주었으며 배제율 또한 우수한 결과(55∼60%)를 보여주었다. 압력에 대한 pore-filled 이온교환막의 성능을 관찰한 결과 압력이 증가할수록 투과도와 배제율은 함께 증가하였다.