• Korean Journal of Soil Science and Fertilizer
• /
• v.49 no.1
• /
• pp.30-35
• /
• 2016

Rice cultivation in paddy field affects the global balance of methane ($CH_4$) as a key greenhouse gas. To evaluate a potential use of by-product gypsum fertilizer (BGF) in reducing $CH_4$ emission from paddy soil, $CH_4$ fluxes from a paddy soil applied with BGF different levels (0, 2, 4 and $8Mg\;ha^{-1}$) were investigated by closed-chamber method during rice cultivation period. $CH_4$ flux significantly decreased (p<0.05) with increasing level of BGF application. $8Mg\;ha^{-1}$ of BGF addition in soil reduced $CH_4$ flux by 60.6% compared to control. Decreased soil redox potential (Eh) resulted in increasing $CH_4$ emission through a $CO_2$ reduction reaction. The concentrations of dissolved calcium (Ca) and sulfate ion (${SO_4}^{2-}$) in soil pore water were significantly increased as the application rate of BGF increased and showed negatively correlations with $CH_4$ flux. Decreased $CH_4$ flux with BGF application implied that ${SO_4}^{2-}$ ion led to decreases in electron availability for methanogen and precipitation reaction of Ca ion with inorganic carbon including carbonate and bicarbonate as a source of $CH_4$ formation under anoxic condition. BGF application also increased rice grain yield by 16% at $8Mg\;ha^{-1}$ of BGF addition. Therefore, our results suggest that BGF application can be a good soil management practice to reduce $CH_4$ emission from paddy soil and to increase rice yield.

• Korean Journal of Soil Science and Fertilizer
• /
• v.45 no.1
• /
• pp.93-97
• /
• 2012

This study was conducted to evaluate the efficiency of various inorganic and organic materials to improve physical properties of soil. Saline sodic soil (saturation percentage = 40.36%, $EC_e=5.15dS\;m^{-1}$, $pH_s=8.70$, $SAR=18.84(m\;mol\;L^{-1})^{1/2}$, bulk density =$1.49Mg\;m^{-3}$) was collected, brought to wire house and filled in pots after laboratory analysis for various parameters. Different sources of organic nutrients like farm manure (FM), press mud, compost, poultry manure and sesbania green manure were analyzed for their chemical composition. The experiment comprised of 12 treatments replicated thrice; $T_1$: control (recommended NPK), $T_2:{\frac{1}{2}}$ recommended NPK, $T_3$: FM at 1.5% by soil weight, $T_4$: pressmud at 1.5% by soil weight, $T_5$: compost at 1.5% by soil weight, $T_6$: poultry manure at 1.5% by soil weight, $T_7$: sesbania green manure at 1.5% by soil weight, $T_8:T_2$ + FM at 0.75% by soil weight, $T_9:T_2$ + pressmud at 0.75% by soil weight, $T_{10}:T_2$ + compost at 0.75% by soil weight, $T_{11}:T_2$ + poultry manure at 0.75% by soil weight, $T_{12}:T_2$ + sesbania green manure at 0.75% by soil weight. These treatments were applied using completely randomized (CR) design and appropriate time was given to decompose these organic nutritional sources. Seeds of wheat cultivar Sahar-2006 were sown. After harvesting the wheat, soil samples were collected from each pot and analyzed for various physical properties like bulk density, porosity and saturation percentage. An improvement in physical properties (bulk density, porosity and saturation percentage) of soil was noticed with the application of various organic nutritional sources but role of compost alone ($T_5$) remained prominent.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.20 no.3
• /
• pp.71-82
• /
• 2012

Common bulking agents in composting system include woody materials such as sawdust and woodchips. These bulking agents are mainly used for the purpose of the proper control of C/N ratio and moisture content in the composting. The topic for the effect on air permeability of bulking agents has far received relatively little attention in the composting field. This study investigated the effect of bulk density, moisture content, air-filled porosity, particle size and air flow rate on air permeability of several mixture ratios of sawdust and woodchip bulking agent. Increasing the moisture contents, the air-filled porosity was decreased and the particle size was increased for all kinds of bulking agent mixtures. Especially, with the increasing of mixing ratio of woodchip, these effects were sharply magnified. The air permeability respond to air-filled porosity was very similar to that for moisture content which was anticipated the linear relationship between air-filled porosity and moisture content. Above the region of moisture content 0.25 or 0.43(d.b.)(20 or 30% w.b.), the pressure drop decreased even though air-filled pore spaces were filling with water. Especially, to the particle size of 5 mm the pressure drop was decreased exponentially, so the air permeability was dramatically improved. By the water had the role of binding of the small particles, the macropores less resistances to air flow were created in the matrix. The effect of particle size on air permeability was much stronger than that of air-filled porosity or moisture content. And it is needed the preparing of initial particle size above 5 mm for efficient composting.

• THE JOURNAL OF KOREAN ORIENTAL ONCOLOGY
• /
• v.5 no.1
• /
• pp.47-60
• /
• 1999

Traditional oriental medicines have been used for treatment of various kinds of human cancers for long times and some of them proven to be effective clinically. However, the pharmacological actions and mechanisms related to cancer treatment are generally unknown. In an effort to clarify the action mechanisms of several oriental medicines used for cancer treatments, we planned this experimental procedures. We selected Cordyceps sinensis (冬蟲下草), Punellae Herba (夏枯草), Rehmanniae Radix (熟地黃), Paeoniae Radix (白芍藥), Oldenlandiae Herba (白花蛇舌草), Partulaceae Herba (馬齒? ), Scdopendra subspinipes mutilans (蜈蚣), Mylabris Phalerara (班蟄), Phellinus igniarius(桑黃), Ganodermae Lignum(靈芝) for evaluation, which have been used for patients of gastric cancers. The twenty grams of medicines were boiled in 100ml of water for 1 hour and filtered with $0.2\;{\mu}m$ pore-sized filter unit to remove insoluble particles. Initially we evaluated the effects oriental medicines on growth inhibition in stomach cancer cells. The gastric cancer cell line, AGS, was cultured in RPMI 1640 supplemented with l0% heat-inactivated fetal bovine serum and treated with $10{\mu}l$ oriental medicines per 1ml of medium up to 48 hours. The specimens were subjected to MTT assay for evaluation of growth inhibition. We found mat Mylabris phalerata (班蟄) markedly suppressed the growth of cancer cells as shown in results. Next, we checked the effects of oriental medicines on cancer on cell cycles and apptosis. Mylabrls phalerata (班蟄) inhibited cell cycle progression of cancer cells a compared with control cells and cells treated with other medicines. In addition, Mylabri phalerata (班蟄) induced apoptosis in 30-40% of stomch cancer cells within 24 hours. Other oriental medicines used for this experiments did not show apoptosis-inducing effects on cancer cells. Finally, we determined the expression levels of genes associated with cell cycle and apoptosis. The expressions of Bcl-2 and bcl-XL were downregulated by the treatment of Mylabris phalerata (班蟄). However, the expression levels of genes related to cell cycles were not altered significantly. In conclusion, we found that Mylabris phalerata (班蟄) has in vivo gowth-inhibiting and apptosis-inducing effects on stomach cancer cells. However, we think that at least animal experiments are necessay for evduations.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.3
• /
• pp.282-288
• /
• 2002

This study was carried out to investigate the optimum tagging method of the abalone juvenile, Haliotis discus hannai in indoor culture system from May 2000 to January2001. Tagging methods were shell drilling, copper-wire tagging at the respiratory pore and nut gluing on the shell. The attachment rates of the shell showed high in the 2- and 3 cm bolt-nut tagged groups, about over $89.5\%$, whereas shell drilling groups on the shell were about $18.5\%$. The internal coating rates tagged with bolt-nut were over $96.6\%$, while those tagged with copper wire were less than $17.1\%$. Growths in the all marked and tagged experimental groups comparing with control groups were not significantly different (p>0,05). Survivals in all tagging groups except shell drilling and nut gluing groups in the 5 cm abalone were over $95\%, Accordingly, all juvenile groups were not affected by the tagging methods in terms of the growth and survival on the abalones. Based on these results, the micro bolt-nut tagging was the most effective method in abalone.

• Membrane Journal
• /
• v.23 no.3
• /
• pp.211-219
• /
• 2013

Effect of water back-flushing period (FT) was investigated in hybrid water treatment process of carbon ultrafiltration and polypropylene (PP) beads coated with photocatalyst, and membrane effect was studied by comparing the previous studies with carbon microfiltration or alumina ultrafiltration, microfiltration membranes. FT 6 min was the most effective to control initial membrane fouling and optimal condition because the membrane fouling resistance was low until initial 60 min and the maximum total permeate volume was acquired at this FT. The turbidity treatment efficiency was high beyond 98.6%, and did not depend on FT, which was same with the previous result of carbon or alumina microfiltration. The organic matters treatment efficiency was the highest value of 98.2% at FT 6 min, which was almost same trend with the previous result of alumina microfiltration. Then the organic matters treatment efficiency of carbon microfiltration was the minimum at no back-flushing (NBF) and increased as decreasing FT, but that of alumina ultrafiltration was the maximum at NBF and also increased as decreasing FT. Therefore it means that water back-flushing effect on the organic matters treatment efficiency had a different mechanism depending on pore size in spite of the same material membranes.

• Korean Journal of Materials Research
• /
• v.14 no.10
• /
• pp.731-736
• /
• 2004

Herein, we report on the co-firing of a low-K wiring substrate and a middle-K functional substrate in LTCC. Firstly, we researched the sintering behavior and dielectric properties of the low-k wiring substrate comprised by alumina and glass frit with ${\varepsilon}_r$, of $\sim7$ and the middle-k functional substrate comprised by $Ba_{5}Nb_{4}O_{15}$ and glass frit with ${\varepsilon}_r$, of $20\sim30$. The warpage and delamination between the hetero layers of the low-K and the middle-K composition were also studied. In particular, physical matching of the hetero layers could be possible by adjusting of the sintering properties of the composition. We observed that an introduction of the glass frit to the low- and middle-K substrate gives rise to a minimization of an effect given by separation of the hetero layers, and modification of the fraction of the glass frit accompanied by a variation of the composition could control the sintering behavior and its beginning temperature. In the case of co-firing of the L03 as the low-K wiring substrate composition and the M03 as the middle-K functional substrate composition at $875^{\circ}C$, we could fabricate a desirable structure of hetero layers without any kinds of structural defects such as separation, warpage, delamination, pore trap, etc. We suppose that the co-firing techniques described in this study would provide a helpful method to fabricate a LTCC multi-functional for the next generation.

• Geotechnical Engineering
• /
• v.1 no.1
• /
• pp.59-72
• /
• 1985

This paper deals with the numerical analysis by the (mite element method introducing Biot's theory of consolidation and the modified Cambridge model proposed by Roscoe school of Cambridge University as constitutive equation and using Christian-Boehner's technique. Especially, time interval and division of elements are investigated in vies of stability and economics. In order to check the validity of author's program, the program was tested with one-dimensional consolidation case followed by Terzaghi's exact solution and with the results of the Magnan's analysis for existing banking carried out for study at Cubzac-les-ports in France. The main conclusions obtained are summarized as follows: 1. In the case of one-dimensional consolidation, the more divided the elements are near the surface of the foundation, the higher the accuracy of the numerical analysis is. 2. For the time interval, it is stable to divide 20 times per 1-lg cycle. 3. At the element which has long drain distance, the Mandel-fryer effect appears due to time lag. 4. Lateral displacement at an initial loading stage predicted by author's program, in which the load was assumed as not concentrative. but rather in grid form, is well consistent with the value of observation. 5. The pore water pressure predicted by author's program has a better accordance with the value of observation compared with Magnan's results. 6. Optimum construction control by Matsuo-Kawamura's method is possible with the predicted lateral displacement and settlement by the program.

• Journal of Environmental Health Sciences
• /
• v.43 no.6
• /
• pp.509-515
• /
• 2017

Objectives: The purpose of this study was to assess the indoor levels of $PM_{10}$, VOCs and aldehydes in nail shop and hair salon. Methods: The field survey was conducted for 52 hair salons 52 nail shops, and 26 shop-in-shops in Seoul and Daegu city. The field technicians investigated characteristics of each shop including operating time, indoor volume, ventilation and so on. Indoor concentrations of $PM_{10}$, VOCs and aldehydes, indoor temperature and humidity were measured in 12 hair salons, 12 nail shops and 6 shop-in shops. MP Surveryor II (Graywolf, USA) was used to measure $CO_2$ concentration, temperature and humidity for 8 hours. $PM_{10}$ concentrations were measured by minivolume air sampler with Teflon quartz filter ($0.2{\mu}m$ pore size, ${\varphi}$ 47 mm, Graseby-Anderson TEF-DISKTM) for 6 hours. VOCs passive sampler (OVM 3500) was used to collect VOCs for 8 hours and analyzed by GC/MSD. Results: The $CO_2$ concentrations were $759.4{\pm}58.2$ ppm in nail shops, $731.0{\pm}72.5$ ppm in hair salons, and $656.4{\pm}31.2$ ppm in shop-in-shops. The $PM_{10}$ concentrations were $27.5{\pm}14.2{\mu}g/m^3$ in nail shops, $33.1{\pm}6.3{\mu}g/m^3$ in hair salons, and $39.0{\pm}26.9{\mu}g/m^3$ in shop-in-shops. TVOCs concentrations were $3085.4{\pm}1667.8{\mu}g/m^3$ in nail shops, $2131.1{\pm}617.3{\mu}g/m^3$ in hair salons, and $1550.3{\pm}529.0{\mu}g/m^3$ in shop-in-shops. TVOCs concentrations in nail shops were significantly higher than those in hair salons and shop-in-shops (p=0.002). Formaldehyde concentrations were $60.8{\pm}36.6{\mu}g/m^3$ in nail shops, $89.1{\pm}55.4{\mu}g/m^3$ in hair salons, and $45.1{\pm}22.5{\mu}g/m^3$ in shop-in-shops. Conclusion: TVOCs concentrations in nail shop were the highest among others. TVOC concentrations in all stores exceeded indoor air quality stand of indoor air quality control in public-use facilities, etc act.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.2
• /
• pp.362-370
• /
• 2013

The coconut shell based activated carbon was applied for EDLC (electric double layer capacitor) electrode with the post treatments. The electrochemical properties were evaluated with a coin cell using the activated carbon as electrode. The initial gravimetric and volumetric capacitance of the coconut shell based activated carbon electrode s were 66 F/g and 39 F/cc, and these values decreased to 54 F/g and 32 F/cc after 100 cycles, respectively showing 82% of charge-discharge efficiency. The properties of CV graph with the commercial activated carbon electrodes showed the serious polarization as the result of additional reaction between electrolyte and impurities of the electrode materials. In order to remove impurities efficiently, the commercial activated carbon was treated by alkali and acid solutions consecutively, and then heat treated to control the pore size distribution and the content of surface functional groups. The surface functional groups decreased with the increased heat temperature and the specific capacitance increased with the decreased surface functional groups. The initial capacitance of coconut shell based activated carbon elec trode which was treated with NaOH and HNO3, and then heat treated at $800^{\circ}C$ was 44 F/cc, and the value turned out to be 42 F/cc after 100 cycles, showing over 95% of charge-discharge efficiency.