• Current Research on Agriculture and Life Sciences
• /
• v.14
• /
• pp.49-60
• /
• 1996

In order to evaluate soil factors affecting the growth of Italian poplar, 23 areas planted with Italian poplar were surveyed. These 23 areas were classified into 3 categories, river-side, fallow-land and hill-side. The growth performance and soil factors for each area were investigated. The growth of Italian poplar at river-side was shown to be superior to that of fallow-land and fill-side. The rates of growth for fallow-land and hill-side are decreased by 8% and 21% compared to those of river-side, respectively. This suggests that plantation of Italian poplar at hill-side would not be profitable. Soil conditions of high productive area appeared liquid phase 20%, porosity 45%, water holding capacity 35 - 40%, soil hardness $1kg/cm^3$. pH 6 and rich in organic matter and total nitrogen. The results of factor analysis for soil factors affecting to Italian poplar growth that showed eigenvalue over 1 and communality value over 70% explained factor 1 : liquid phase, porosity and water holding capacity, factor 2 : pH and calcium, and factor 3 : soil hardness. This suggests that physical characteristics of soil is more important than chemical characteristics for Italian poplar growth. Multiregerssion analysis was conducted between diameter growth and soil hardness, liquid phase and calcium. The t-values for each independent variables showed significance at 1 - 10% level, but water holding capacity and pH are not significant. It is supposed that sites suitable to Italian poplar were alluvial plain of sandy loam or part of banking soil, well-ventilating soil, lower soil hardness, apposite soil moisture absorbing with about 100cm of ground water level, plentiful organic matters and total nitrogen and little acidity soil.

• Landscaping Tree
• /
• s.129
• /
• pp.14-19
• /
• 2012

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2002.04a
• /
• pp.311-314
• /
• 2002

국내에서 자생하는 포플러중 현사시, 양황철, 이태리포플러를 대상으로 제초제인 atrazine의 제거특성을 조사하였다 Atrazine이 포플러에 미치는 독성을 평가하고, 식물체에 의한 atrazine 제거효율 및 제거속도를 조사하였다. 또한 식물체의 체내로의 흡수에 의해 atrazine이 제거되므로 식물체로 흡수된 후의 생물학적 변환 과정에 대해서도 조사하였다. 현사시, 양황철, 이태리포플러 모두 실험이 진행된 전범위의 농도에서 황백화현상, 낙엽증가, 생체량 감소와 같은 식물독성을 나타냈으며, 현사시인 경우 양황청 및 이태리 포플러에 비해 상대적으로 민감한 반응을 나타내었다. Atrazine 독성여부 평가의 하나로 초기 atrazine 농도가 증가할수록 현사시, 양황철, 이태리포플러의 증산량은 상대적으로 감소함을 관찰하였다. 포플러에 의한 atrazine 생물학적 변환실험에서는 atrazine이 중간생성물질인 HA, DEA, I)IA를 거쳐 ammeline을 포함한 HDAP로 전환되는 것을 확인하였다. 이 결과의 중요성은 atrazine 부산물은 상대적으로 독성이 적고, 미생물에 의해 어렵지 않게 완전 무기화할 수 있기 때문이다. 즉, 식물체내에서도 HBAP 이후 과정을 통한 분해가 이루어질 수 있는 가능성이 있다고 추측할 수 있다.

• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.166-171
• /
• 2016

Size reduction is one of the major pre-processing operations in using biomass as a source of energy or raw materials for forest products industry. The grinding characteristics of dried yellow poplar wood chips were investigated using laboratory knife mill with three different screen aperture diameters to provide the basic information for the optimizing of size reduction processes in biomass industry. Average specific energy consumptions were 0.157, 0.137, and 0.093 Wh/g for the screen aperture diameters of 5.0, 7.5, and 9.0 mm, respectively. According to the results of size distribution analysis of ground particles, the sizes of the most of ground particles were much smaller than the aperture diameters of the screens installed on knife mill used in this study.

• Journal of Microbiology and Biotechnology
• /
• v.20 no.3
• /
• pp.474-479
• /
• 2010

In this paper, we analyzed the microsatellites in the transcript sequences of the whole Laccaria bicolor genome. Our results revealed that, apart from the triplet repeats, length diversification and richness of the detected microsatellites positively correlated with their repeat motif lengths, which were distinct from the variation trends observed for the transcriptional microsatellites in the genome of higher plants. We also compared the microsatellites detected in the genic regions and in the nongenic regions of the L. bicolor genome. Subsequently, SSR primers were designed for the transcriptional microsatellites in the L. bicolor genome. These SSR primers provide desirable genetic resources to the ectomycorrhizae community, and this study provides deep insight into the characteristics of the micro satellite sequences in the L. bicolor genome.

• Journal of Life Science
• /
• v.8 no.4
• /
• pp.443-448
• /
• 1998

We analyzed lignin content and wxpression of OMT gene during growth season in two hybrid poplar species. OMT gene expression was observed mainy in the developing secondary xylem where major quantity of lignin occurs. Lignin content in the xylem tissue increased as plant resumed growth in the spring and reached the highest in the late August. Change in lignin content was concurrent with that of OMT gene expression, indicating OMT is a key enzyme in lignin biosynthesis.

• Plant Resources
• /
• v.7 no.2
• /
• pp.87-92
• /
• 2004

Five different poplar hybrids were tested for rescuing embryo to elongate in vitro plantiets after hybridization. Ovaries and ovules were cultured on Woody Plant Medium (WPM) supplemented with cytokinins, 6-benzylamine (BA) and zeatin. Multiple shoots were initiated from half section of capsule with immature embryos after 21 days from pollination and tiny shoots were formed after the expansion of cotyledons in ovule cultures. Germinating response was better in intraspecific hybrids $(6.53\pm1.66)$ than interspecific crosses $(0.93\pm0.54)$ from half section of capsules on WPM medium. In general, zeatin was better than BA in inducing multiple shoots from isolated ovules. The highest average number $(19.40\pm4.53)$ of shoots was produced from immature ovules of 21 days post-pollination of WPM medium supplemented with 5.0 mg/L zeatin. The highest percentage of germination was 93% from the half section of in vitro ovary cultures. Soil acclimation was successfully conducted in cell tray containing artificially mixed soil with 96% survival rate.

• Journal of the Korean Wood Science and Technology
• /
• v.21 no.2
• /
• pp.67-72
• /
• 1993

Hot water extractives of sawdust/particle from domestic and foreign wood species, which were composed of pitch pine, Korean pine, larch, Italy poplar, acacia and oak as Korean wood species, Malaysian oil palm and German spruce were quantitatively analyzed with thin layer chromatography. Sugar components of saccharose, galactose, glucose, fructose and arabinose were contained in these wood species. It was assumed that arabinose and glucose are major inhibitory components against cement hardening in larch and oil palm, respectively, since both species contain a large amount of each sugar. In contrast, fructose might not influence so badly on a cement hardening, when considering that fructose was contained much in Italy poplar with a good cement hardening character. Galactose was a minor component.

• Journal of Life Science
• /
• v.7 no.3
• /
• pp.172-175
• /
• 1997

Transgenic hybrid poplar subclones containing herbicide glyphosate resistant gene (aroA) were treated with ozone at the concentration of 100 nL L$^{-1}$ for 6 hr for 5 consecutive days. The foreign gene expression in leaves of all treated plants was reduced both at transcriptional and translational levels confirmed by Northern and Western blot analysis, respectively, as compared to non-treated control plants. These results indicated that the expression of foreign gene in transgenic plants could be affected by the environmental stresses. Thus, the performance of transgenic plants cultivated on field conditions may be lower than they are expected.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.06b
• /
• pp.349-352
• /
• 2006

The conventional pulping processes in Iran were reviewed in this paper. On account of forest resources restriction, a considerable extent of non-harvestable hardwood forests, the possibility of accessable non-wood resources and Poplar fast-growing species for using in pulp and paper industry was investigate. The cultivated area and abundance of each mentioned raw material (Wheat Straw, Sugarcane Bagasse, Poplars) were specified and the quality of their produced papers were compared in strength and opacity properties. Spruce species data was used for experiments comparisons. Regarding to environmental pollutions, low yield, inflexibility in wood and non-wood species resulted from the existent conventional processes of paper manufacturing, APMP is recommended due to high quality paper, desirable opacity properties, high yield and also the usage for all the raw materials.