• Restorative Dentistry and Endodontics
• /
• v.31 no.6
• /
• pp.445-451
• /
• 2006

The purposes of this study were to compare the effects of one or two applications of all-in-one adhesives on microtensile bond strengths (${\mu}$TBS) to unground enamel and to investigate the morphological changes in enamel surfaces treated with these adhesives using a scanning electron microscopy (SEM). Twenty-five noncarious, unrestored human mandibular molars were used. The unground enamel surfaces were cleansed with pumice. The following adhesives were applied to lingual, mid-coronal surfaces according to manufacture's directions; Clearfil SE bond in SE group, Adper Prompt L-Pop$^{TM}$1 coat in LP1 group, 2 coats in LP2 group, Xeno$^{\R}$III1 coat in XN1 group, and 2 coats in XN2 group. After application of the adhesives, a hybrid light-activated resin composite was built up on the unground enamel. Each tooth was sectioned to make a cross-sectional area of approximately 1.0 mm$^2$ for each stick. The microtensile bond strength was determined. Each specimen was observed under SEM to examine the morphological changes. Data were analyzed with one-way ANOVA. The results of this study were as follows; 1. The microtensile bond strength values were; SE (19.77 ${\pm}$ 2.44 MPa), LP1 (13.88 ${\pm}$ 3.67 MPa), LP2 (14.50 ${\pm}$ 2.52 MPa), XN1 (14.42 ${\pm}$ 2.51 MPa) and XN2 (15.28 ${\pm}$ 2.79 MPa). SE was significantly higher than the other groups in bond strength (p < 0.05). All groups except SE were not significantly different in bond strength (p < 0.05). 2. All groups were characterized as shallow and irregular etching patterns.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.8
• /
• pp.1113-1120
• /
• 2011

Enzymatic interesterification was conducted with the palm mid fraction (PMF) and stearic ethyl ester for 1, 5, and 9 hr at 46$^{\circ}C$. The reaction was catalyzed by Lipozyme TLIM (2, 3, and 4% by weight of total substrates) in a shaking water bath at 180 rpm. As the reaction continued, oleic acid (C18:1) content at the sn-2 position decreased, whereas saturated fatty acid (C16:0 and C18:0) content increased. In the high performance chromatography analysis, 1,3-dipalmitoyl-2-oleoyl glycerol content decreased, whereas 1(3)-palmitoyl-2-oleoyl-3(1)-stearoyl glycerol (POS) content increased up to the reaction equilibrium. The rate of acyl migration increased with increasing molar ratio and enzyme load as well as reaction time. The optimal reaction conditions for maximizing POS content (53.5 area%) and minimizing acyl migration (23.1 area%) were obtained with a PMF : stearic ethyl ester=1:2 (molar ratio), Lipozyme TLIM 3 wt%, and a reaction time of 5 hr.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.4
• /
• pp.479-485
• /
• 2009

The acidolysis was performed to produce structured lipid with palm mid fraction (PMF) and stearic acid for 7, 24, and 36 hr at $70^{\circ}C$. The reaction was catalyzed by lipozyme TLIM (immobilized lipase from Thermonyces lanuginosa, amount of 10% and 20% by weight of total substrates) in the shaking water bath. The reaction conditions for maximum incorporation of stearic acid on the structured lipid were obtained when molar ratio of PMF and stearic acid was 1:2; concentration of lipozyme TLIM was 20wt%; reaction temperature was $70^{\circ}C$; and reaction time was 36 hr. After reaction under this condition, incorporation of stearic acid in the structured lipid was obtained up to 36.3% while the major components of triacylglycerol were 1,2-dipalmitoyl-3-stearoylglycerol (PPS, 28.19 area%), 1-palmitoyl-2-oleoyl-3-stearoylglycerol (POS/PSO, 20.70 area%) and 1-palmitoyl-2,3-distearoylglycerol (PSS, 18.13 area%). However, the fatty acid composition at the sn-2 position suggested that the positional specificity of lipozyme TLIM was not observed due to the acyl migration.

• Restorative Dentistry and Endodontics
• /
• v.29 no.2
• /
• pp.162-169
• /
• 2004

This study evaluated the marginal microleakage of five single step adhesives. Class V cavity preparations with occlusal margins in enamel and gingival margins in dentin were prepared on both buccal and lingual surfaces of extracted human molar teeth. Prepared teeth were randomly divided into five groups and restored using one of the single step adhesives and composite resins：Prompt L-Pop/Filtek Z-250 (Group 1), AQ Bond/Metafil CX (Group 2), One-Up Bond F/Palfique Toughwell (Group 3). Futurabond/Admira (Group 4), Xeno III/Spectrum TPH (Group 5). The restored teeth were thermocycled. Microleakage was assessed by dye penetration using 2% methylene blue dye solution. The teeth were bisected buccolingually and evaluated for microleakage under steromicroscope. The data were statistically analysed by Kruskal-Wallis test and Mann-Whitney tests. The results of this study were as follows：1. Microleakage of enamel margins in group 3 was statistically higher than that in groups 1, 2, 4, 5 (p < 0.05). 2. Microleakage of dentin margins in group 1 was statistically higher than that in groups 2, 5, and that in group 3 was statistically higher than that in groups 2, 4, 5 (p < 0.05). 3. Dentin marginal microleakage was higher than enamel marginal microleakage in all experimental groups. In conclusion, Prompt L-Pop showed the least leakage at enamel margin, and AQ Bond showed at dentin margin in this study. Marginal miroleakage in dentin was higher than that in enamel.

• Restorative Dentistry and Endodontics
• /
• v.30 no.1
• /
• pp.49-57
• /
• 2005

The purpose of this study was to evaluate the effect of multiple application of all-in-one dentin adhesive system on microtensile bond strength to caries-affected dentin. Twenty one extracted human molars with occlusal caries extending into mid-dentin were prepared by grinding the occlusal surface flat. The carious lesions were excavated with the aid of caries detector dye. The following adhesives were applied to caries-affected dentin according to manufacturer's directions; $Scotchbond^{TM}$ Multi-Purpose in SM group, Adper Prompt $L-Pop^{TM}$ 1 coat in LP1 group, 2 coats in LP2 group, 3 coats in LP3 group, $Xeno^{(R)}$ III 1 coat in XN1 group, 2 coats in XN2 group. and 3 coats in XN3 group. After application of the adhesives, a cylinder of resin-based composite was built up on the occlusal surface. Each tooth was sectioned vertically to obtain the $1{\times}1\;mm^2$ sticks. The microtensile bond strength was determined. Each specimen was observed under SEM to examine the failure mode. Data were analyzed with one-way ANOVA. The results of this study were as follows; 1. The microtensile bond strength values were; SM ($14.38{\pm}2.01$ MPa), LP1 ($9.15{\pm}1.81$ MPa), LP2(14.08{\pm}1.75$ MPa), LP3 ($14.06{\pm}1.45$ MPa). XN1 (13.65{\pm}1.95$ MPa). XN2 ($13.98{\pm}1.60$) MPa, XN3 ($13.88{\pm}1.66$) MPa, LP1 was significantly lower than the other groups in bond strength (p < 0.05). All groups except LP1 were not significantly different in bond strength (p > 0.05). 2. In LP1, there were a higher number of specimens showing adhesive failure. Most specimens of all groups except LP1 showed mixed failure.

• Journal of the Korean earth science society
• /
• v.35 no.3
• /
• pp.180-191
• /
• 2014

In this study, a geological field trip learning program using 3 Dpanorama virtual reality (PVR) techniques is developed to learn about the Chaeseokgang area located in a national park near Byeonsan-bando, Jeonbuk, Korea. The developed $360^{\circ}{\times}180^{\circ}$ PVR program can show every face of observational points and interact as zoom-in, zoom-out and image rotation. For the educational effects of the materials, it is provided with a compass, a protractor for measuring the dip of strata and observation of specimen of observational points. It also assists students to learn by providing enlarged images, pop-up windows, and expert explanation main observational points. The program is applied to the class of 35 gifted students in middle school to investigate the effectiveness of the program. The results showed that positive responses of the students were 85% or more. It is suggests that this program be used as indirect situated learning material and a solution to geological field trip problems like cost, safety, distance, and so on geological learning of middle school science.

• Archives of design research
• /
• v.11 no.2
• /
• pp.155-164
• /
• 1998

This study is a proposal for the positive application of collage techniques into the process of interior design. For that, we need to set up the appropriate definitions of collage and to analyze its properties as a creative design methode of that field, in the basis of the twentieth-century art history. The study is divided into three sections as follows: 1) The traces of collage in the art movements such as Cubism, Dada, Surealism, and Pop art will be researched in terms of art concepts, appearances and, properties. 2) The relationships between collage and the main ideas of those art movements, as mentioned above, will be discussed for proving that collage is such an effective techniques as to erdxxly Post-modem ideas. 3) The examples of collage techniques and their effects appearing in Post-modem interior spaces will be surveyed for the purpose of proving its abilities as a creative design methode in interior design. Further studies should be succeeded for suggesting practical and educational models of its application.

• Journal of Fashion Business
• /
• v.2 no.1
• /
• pp.86-99
• /
• 1998

The aim of this study to examine the Hip-Hop style, one of the fashion trends of the new generation in the 1990s and to come up with a design with a Hip-Hop image. As the Counterculture, Black Renaissance, Pop Star Syndrome, the importance of Hip-Hop fashion in mass culture was recognized and given a firm place as one of the major cultural trends of the 1990s. Hip-Hop fashion has a history: it originated from the Caribbean style in the 1940s and was transformed into Rude Boys style in the 1960s, Two-tone style and Rastafarians style in the 1970s. Finally it was succeeded by B-boys and Flygirls style. Hip-Hop style combines characteristics of all three styles mixed in one, which are as follows. First, Neo-Hip-Hop Fashion, Second, Hip-Hop Reggae Fashion and Third, Graffiti Fashion. Based on these three Hip-Hop images of the 19905, an attempt will be made to produce a Design Planning with a predicted 1998 fashion trend. This research provides order sheets on ready-made clothes designed for new generation in their late 10s and early 20s. Design Concept, Image Map, Fabric, color direction will be offered on the basis of an image map drawn in line with the three design concepts incorporating three sub themes of Liveliness, Modern Ethnic, and Dynamic Future. Three designs will be designed based on the following fashion themes$\ddot{o}$ Generation 'Y', Black Guys and Street Boys.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.19-26
• /
• 2002

The Circumstance of Construction Industry is speedily changing. For example, the stock of building, housing etc , will be measure up in KOREA soon. And. Variety and Complexity of Construction Purpose are increasing. So that Clearness and Frankness of Project Process are inquired more than ever. We need to approach by Fundamentally, Radically, and Dramatically. The purpose of this study is Qualitative Prosperity by Reconsideration of Principles of System and Positive Action to Changing Condition on Construction Industry. In the other words, when all Stakeholders are participates in construction project, Creative Genius, Liability and Responsibility are important. Construction System need to Competitive Sense and Organic Integration as Social Open System. In this paper, Project Process, Stakeholder, Organizing Process and Total Project Operation System are considered.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1992.04b
• /
• pp.524-531
• /
• 1992

S/W의 구성은 기능을 실제로 수행하는 계산처리부와 사용자와 정보를 주고받는 User Interface부로 크게 나누어 볼 수 있다. 대부분의 S/W는 그 기능의 충실도와 아울러 편리한 사용법이 잘 어울려야 제역할을 할 수 있다. 따라서 편리한 User Interface를 만드는 일은 훌륭한 기능을 제공하는 것과 마찬가지로 S/W 개발자들이 지향해야 할 목표중 하나라 하겠다. 그러나 편리한 User Interface를 만드는 일은 전체 시스템개발 기간중 상당한 부분을 차지한다. 특히 CAD/CAM관련 S/W와 같이 사용자와 정보를 Graphic으로 주고받는 경우에는 User Interface의 구성이 더욱 더 어려워지며, 개발기간중 User Interace가 차지하는 비중은 더욱 커지게 된다. GUI는 최근들어 상당히 각광을 받고 있는 분야이며, 상당수의 GUI가 개발되어 있고, 이중 Unix용의 X-Window MS-DOS용의 MS-WINDOWS 3.0이 널리 사용되고 있다. 그러나 이러한 Window System들은 매우 다양한 기능을 제공하고 있음에도 불구하고, GUI자체의 덩치가 매우크고, S/W개발자가 익혀야하는 내용이 너무 복잡하여, 중/소형의 S/W개발에 사용하기에는 적합하지 않다. 본 연구에서는 GUI(Graphic User Interface)부분을 계산처리부와 완전분리하여, 범용성있는 개발용 Tool Kit을 구성함으로써 S/W개발자는 계산처리부만을 만들면되는 방안을 제시하고 있다. GS-GUI는 Menu처리부, Mouse/Keyboard입력처리부, Text/Graphic출력처리부로 나뉘어진다. Menu처리부는 Menu File로 주어지는 Menu Tree를 Pop-Up형태로 보여주며 User가 Menu를 선택할 수 있도록하며 선택된 Menu Item에 대한 Action Code를 계산처리부로 넘겨준다. 입력처리부에서는 Mouse와 Keyboard 어느것으로나 입력이 가능하도록 해준다. 출력처리부에서는 Action Code에 따라 계산처리부에서 계산된 결과를 화면에 보여주기 위한 각종 2D/3D Graphic Routine들이 포함되어있어 계산처리부에서 불러쓰도록 되어있다.