• Macromolecular Research
• /
• 제10권4호
• /
• pp.194-203
• /
• 2002

In resin infusion process(RIP), the fiber and the resin are in contact with each other for an impregnation step and often results in flow-induced defects such as poor fiber wetting and void formation. Resin flow characteristics in transverse direction and process modeling for woven fabric were studied, and the process modeling was applied to the manufacturing of hybrid composite materials. This study also considered the compressibility of woven fabrics in a series of compression force, and it was fitted well to an elastic model equation. Void formation was varied with the processing conditions in the stage of manufacturing composites using RIP. It was concluded from this study that proper combination of pressure build-up and dynamic heating condition makes important factor for flow-induced composite processing.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.488-490
• /
• 2003

As aluminum becomes more widely used in power distribution systems, so the corrosion caused by bimetallic contacts of aluminum and copper becomes more serious problem. In particular, the poor contact of the commonly used compression type bimetal connections may bring about the disastrous interruption of the power supply resulted from the increased corrosion within the joints, which is accelerated by the permeation of water and electrolyte into the interface. In this paper, the corrosion characteristics of aluminum and copper are investigated to improve the reliability of Al-Cu connectons.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2005년도 하계학술대회 논문집 Vol.6
• /
• pp.232-233
• /
• 2005

The Surface of semi-conductive silicone rubber was treated by oxygen plasma to improve adhesion and electric performance in joints between insulating and semi-conductive silicone materials. Surface characterizations were assessed using contact angle measurement and Fourier transform infrared spectroscope (FTIR). Adhesion level was understood from T-peel tests between plasma treated semi-conductive and insulating material. Electrical breakdown strength was measured to understand the charge of electrical performance. From the results, the oxygen plasma treatment produces a significant increase in function group of containing oxygen which can be mainly ascribed to the creation of carbonyl groups on the silicone surface from the strength were improved. Therefore it is concluded then plasma treatment leads to decrease voids originating form poor adhesive, and the improve the adhesion in silicone interface. So we could obtain higher electrical design level of silicone material used for electrical apparatus using oxygen plasma treatment.

• 한국정밀공학회지
• /
• 제27권6호
• /
• pp.39-46
• /
• 2010

Linear induction motor is adopted as an actuator of the planar stage. An inherently poor characteristic at zero or ultra-low speed zone of the induction motor is remarkably improved due to a recent development of power electronic semiconductor technology and a spatial vector control theory. At present, a servo response speed of the induction motor reaches 90 percent of one of PM synchronous or BLDC motor. Specially, as a secondary of the induction motor can be constructed using uniform conducting sheets, there is no periodic force ripple as in PM motors. So, the induction motor can be superior to another driving means under a certain condition. This paper discusses the overall development procedure of non-contact planar stage with a big workspace using linear induction motors.

• 소성∙가공
• /
• 제31권3호
• /
• pp.143-150
• /
• 2022

The purpose of this study was to investigate an innovative hydroforming process for the cost-effective manufacturing of double layered tube with circumferentially corrugated patterns. Conventional double pipe heat exchanger has relatively poor heat transfer efficiency because of the limited contact area resulting from the concentrically arranged simple cylindrical structure. As a promising alternative to enhance heat transfer efficiency, double layered tube with corrugated internal pattern was considered in this study. To fabricate corrugated inner tube, innovative tube hydroforming system was developed. The customized loading paths were established using the simulated forming pressure and contracting stroke at various bar diameters. Experimentally obtained cross-sectional profiles were analyzed to evaluate the reliability and applicability of the hydroformed tube with various patterns. The results demonstrate that the proposed hydroforming process can be a feasible alternative for manufacturing high-performance double-tube heat exchangers.

• 한국안광학회지
• /
• 제5권1호
• /
• pp.107-116
• /
• 2000

본 연구에서는 전북 군산시 및 정읍시 소재 남녀 고등학생 850명을 대상으로 굴절이상, 시력검사, 안경 및 콘택트렌즈 착용상태, 안과상식, 시력관리 등에 관하여 설문조사를 실시하여 다음과 같은 결과를 얻었다. 1. 응답자 823명 중 38%가 정시안이고, 근시가 55.1% 원시가 7%를 차지하는 것으로 조사되었다. 2. 응답자 837명 중 381명(45.5%)이 안경 및 콘택트렌즈를 착용하는 것으로 조사되었고 이중에서 안경만 착용하는 학생이 78%로 제일 많고 안경과 콘택트렌즈 병용이 18% 콘택트렌즈만 착용이 4%로 나타났다. 3. 처음 안정 및 콘택트렌즈 착용을 위해서 시력검사를 받은 장소는 안경원이 64.7% 병원이 28.3%, 시력검사를 받지 않음이 4.2%, 기타가 2.7%로 나타났으며, 안경 및 콘택트렌즈 교체를 위한 시력검사 장소는 안경원이 82%, 병원이 9.5%, 시력검사를 받지 않음이 6.6%, 기타가 1.9%로 나타났다. 4. 시력검사의 주기는 6개월~1년이 54.1%, 6개월 이하가 9.2%, 1년~2년이 29.5%, 2년 이상 7.2%로 나타났다. 5. 콘택트렌즈의 구입 장소는 응답자의 94%가 안경원에서, 6%는 병원에서 구입한 것으로 조사되었다. 6. 안경보다 콘택트렌즈를 선호하는 이유에 대해선 미관상 이유가 51.2%, 운동시간 편함이 23.1%, 안경이 무거움이 9.8%, 기타는 15.7%로 조사되었다. 7. 착용하고 있는 안경테 종류는 플라스틱테가 24.4%, 금 은테가 43.4%, 칼라테가 32.1%를 조사되었다. 8. 안경테 선택시 고려사항은 디자인이 37%, 품질이 36%, 가격이 14.7%, 브랜드가 12.5%로 조사되었다. 9. 안경교체 시기는 6개월 이하가 10.5%, 6개월~1년이 57.3%, 1년~2년 사이가 22.4%, 2년 이상이 9.6%로 조사되었다. 10. 안경을 쓰면 쓰지 않는 것보다 눈이 나빠진다는 그릇된 안과상식에 대해 응답자 중 100% 믿는 학생이 10.5%, 80% 믿는 학생이 22.5%, 50% 믿는 학생이 49.5%, 전혀 믿지 않는 학생이 17.5%로 조사되었다. 11. 시력관리에 대하여 관심 있다가 48.5% 관심 없다가 51.5%로 조사되었다. 시력관리의 방법을 묻는 질문에 TV시청, 컴퓨터사용, 독서시의 거리조절이 49%, 단전호흡 및 눈맛사지가 11%, 식이요법이 4%, 관심 없다가 36%로 나타났다. 12. 20세 이후 성년이 되었을 때 시력 교정수술의 선호도를 묻는 질문에 원한다가 45.9%, 원치 않는다가 27%, 잘 모른다가 27.1%로 조사되었다.

• 한국식품위생안전성학회지
• /
• 제12권3호
• /
• pp.240-253
• /
• 1997

The main problems contributing to food poisoning outbreaks in institutional settings and a home were reviewed and analyzed through the epidemiological investigations of food poisoning. The major documented factors included improper holding temperatures, inadequate cooking, poor personal hygiene, cross-contamination and contaminated equipment, food from unsafe sources, failure to follow food hygiene policies, and lack of education, training, monitoring and superivision. Usually more than one factor contributed to the development of an outbreak. (1) Use of improper holding temperatures was the single most important factor contributing to food poisoning. They included improper cooling, allowing a laps of time (12 hours or more) between preparing food and eating it, improper hot holding, and inadequate or improper thawing. Food thermometers were not used in most of the instances. (2) In inadequate cooking, the core temperature of food during and after cooking had not been measured, and routine monitoring was limited to recording the temperature of plated meals. Compared with conventional methods of cooking, microwave ovens did not protect against food poisoning as effectively. Centralized food preparation potentially increased the risk of food poisoning outbreaks. (3) Poor personal hygiene both at the individual level (improper handwashing and lack of proper hygienic practices) and at the institutional level (poor general sanitization) increased the risk of transmission. Person to person transmission of enteric pathogens through direct contact and via fomites has been noted in several instances. (4) Obtaining food from unsafe sources was a risk factor in outbreaks of food poisoning. Food risks were high when food was grown or harvested from contaminated areas. Possibilities included contamination in the field, in transport, at the retail site, or at the time it was prepared for serving. (5) Cross-contamination and inadequate cleaning/handling of equipment became potential vehicles of food poisoning. Failure to separate cooked food from raw food was also a risk factor. (6) Failure to follow food hygiene policies also provided opportunities for outbreaks of food poisoning. It included improper hygienic practices during food preparation, neglect of personnel policies (involvement of symptomatic workers in food preparation), poor results on routine inspections, and disregarding the results and recommendations of an inspection. (7) Lack of formal and in-service education, training, monitoring, and supervision of food handlers or supervisors were critical and perhaps neglected elements in occurrences of food poisoning.

• 유변학
• /
• 제11권1호
• /
• pp.34-43
• /
• 1999

수지 이동 성형공정에서 섬유직조가 수지에 의해 함침될 때 발생하는 기공 또는 나쁜 젖음성은 최종 성형품의 물성 저하에 심각한 영향을 미치게 된다. 본 연구에서는 수지이동 성형공정에서의 이러한 문제점을 극복하기 위한 기초 데이터를 제공하기 위하여, 실란 커플링제를 사용한 섬유의 표면 개질이 수지의 유동특성과 수지와 섬유 사이의 젖음성 및 기공함량에 미치는 영향을 조사하였다. 빔 형태의 금형을 대상으로 에폭시 수지와 평직형태의 유리섬유를 사용하여 미시적인 유동가시화 실험 및 경화실험을 수행하였다. 섬유의 표면을 개질함으로써 수지와 섬유 사이의 동적 접촉각이 감소하고 위킹속도는 증가한 것으로 나타났으며, 이러한 결과로부터 본 연구에서 사용한 화학적 표면개질이 섬유직조의 젖음성 및 미시적 흐름 거동을 향상시킬 수 있는 중요한 요인임을 확인할 수 있었다. 또한 수지의 높은 온도와 낮은 침투 속도는 동적 접촉각을 감소시키기 위한 중요한 가공 변수임을 알 수 있었다. 그러나 섬유직조의 투과성은 표면을 개질하였을 경우 오히려 감소하였는데, 이는 젖음성의 향상으로 인하여 수지와 섬유 사이의 접촉시간의 증가에 기인하는 것으로 생각된다. 마지막으로 경화공정을 통해 제조된 시편의 기공 함량을 측정 비교한 결과, 표면개질은 수지이동 성형공정에서의 기공형성에도 중요한 변수로 작용하여, 수지와 섬유 사이의 젖음성을 향상시키고, 최종 성형품의 기공함량을 감소시킴을 확인할 수 있었다.

• 자원환경지질
• /
• 제30권6호
• /
• pp.543-551
• /
• 1997

Poongjeon talc deposits is emplaced in dolomite and dolomitic limestone of the Cambro-Ordovician Samtaesan Formation. Ore in Poongjeon is low grade talc and the deposit has been known as the contact metasomatic or hydrothermal replacement type related to the intrusion of late Cretaceous granite in this area. X-ray diffraction, electron microprobe analysis, fluid inclusion and stable isotope analysis were utilized to examine the mineralogy of the ore and the origin of the ore fluid. The ore from Poongjeon mine mainly consists of talc and tremolite with minor amount of illite, vermiculite, smectite, and chlorite-vermiculite mixed layer. Occurrence of ore body indicates that the talc-tremolite ore was formed through the replacement by the $SiO_2$-rich hydrothermal fluid along the bedding and dike boundaries, or contact of amphibolite and basic dike with carbonate rocks. The temperature and pressure of the ore forming fluids at the time of the talc mineralization were estimated as $350^{\circ}C$ and 400 bar, respectively, based on the heating and freezing data of the fluid inclusions in quartz from talc-tremolite veins. During the talc-tremolite formation, fluids were divided into $CO_2$-enriched fluid and $CO_2$-poor fluid from $CO_2$ immiscibility (or effervescence). Oxygen isotope values (${\delta}^{18}O$) of the talc-tremolite fall within a range between 12.2 and 12.9‰. Hydrogen isotope values(${\delta}D$) of the ore range from -60 to -85‰ and $H_2O$ contents range from 2.0 to 3.4 wt.%. ${\delta}^{18}O$ and ${\delta}D$ values of talc ore indicate that the hydrothermal fluid involved in talc-tremolite formation was of igneous origin. Oxygen and hydrogen isotopic exchange between talc ore and the surface water was negligible after talc-tremolite ore formation.

• 한국결정성장학회지
• /
• 제6권3호
• /
• pp.399-405
• /
• 1996

이 논문은 현재 삼성종합기술원에서 연구개발이 진행중인 태양전지의 현항을 소개하고, 미래의 연구를 예측해 보기위한 리뷰성 논문이다. 전극함몰형 태양전지의 공정결과를 기판별로 특성을 조사하고, 보다 저가 공정인 전극함몰형 양변 태양전지의 공정과 비교함으로서, 그 제작 가능성을 분석하였다. 양면 태양전지는 루프 타일형에 가장 적합한 것으로 사료되며, 변환효율은 18~20 %로 예상된다.