• Journal of Plant Biotechnology
• /
• v.47 no.3
• /
• pp.235-241
• /
• 2020

This is the first study to establish a complete protocol for micropropagation of Rehmannia glutinosa from root segments. The study involved investigating the effect of plant growth regulators on in vitro shoot regeneration and rooting and identifying substrates supporting survival and growth performance of ex vitro seedlings. A Murashige and Skoog (MS) medium containing 30 g/L sucrose for shoot induction and 0.2 mg/L indole-3-acetic acid (IAA), 1 mg/L 6-benzylaminopurine (BAP), and 1 g/L polyvinylpyrrolidone (PVP) for shoot multiplication resulted in the highest number of shoots per explant and shoot height. Applying a medium containing 0.5 mg/L IAA and 1 g/L PVP yielded optimal rooting of the shoots grown in vitro. Compost enriched with microbial inoculants and perlite enhanced seedling growth better than that with organic biofertilizer-free substrates (soil and sand). We recommend the continuous production of micropropagated R. glutinosa seedlings from root segments under the aforementioned conditions as a possible propagation technique for crops of this species.

• Korean Journal of Materials Research
• /
• v.21 no.8
• /
• pp.468-475
• /
• 2011

[ $LaMeO_3$ ](Me = Cr, Co) powders were prepared using the polymeric precursor method. The effects of the chelating agent and the polymeric additive on the synthesis of the $LaMeO_3$ perovskite were studied. The samples were synthesized using ethylene glycol (EG) as the solvent, acetyl acetone (AcAc) as the chelating agent, and polyvinylpyrrolidone (PVP) as the polymer additive. The thermal decomposition behavior of the precursor powder was characterized using a thermal analysis (TG-DTA). The crystallization and particle sizes of the $LaMeO_3$ powders were investigated via powder X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and particle size analyzer, respectively. The as-prepared precursor primarily has $LaMeO_3$ at the optimum condition, i.e. for a molar ratio of both metal-source (a : a) : EG (80a : 80a) : AcAc (8a) inclusive of 1 wt% PVP. When the as-prepared precursor was calcined at $700^{\circ}C$, only a single phase was observed to correspond with the orthorhombic structure of $LaCrO_3$ and the rhombohedral structure of $LaCoO_3$. A solid-electrolyte impedance-metric sensor device composed of $Li_{1.5}Al_{0.5}Ti_{1.5}(PO_4)_3$ as a transducer and $LaMeO_3$ as a receptor has been systematically investigated for the detection of NOx in the range of 20 to 250 ppm at $400^{\circ}C$. The sensor responses were able to divide the component between resistance and capacitance. The impedance-metric sensor for the NO showed higher sensitivity compared with $NO_2$. The responses of the impedance-metric sensor device showed dependence on each value of the NOx concentration.

• Journal of Sensor Science and Technology
• /
• v.23 no.3
• /
• pp.211-215
• /
• 2014

The Pt-, Ni- and Cr-decorated tubular $SnO_2$ nanofibers for gas sensors were prepared by the electrospinning of polyvinylpyrrolidone (PVP) nanofibers containing Pt, Ni, and Cr precursors, the sputtering of $SnO_2$ on the electrospun PVP nanofibers, and the removal of sacrificial PVP parts by heat treatment at $600^{\circ}C$ for 2 h. Pt-decorated tubular $SnO_2$ nanofibers showed high response ($R_a/R_g=210.5$, $R_g$: resistance in gas, $R_a$: resistance in air) to 5 ppm $C_2H_5OH$ at $350^{\circ}C$ with negligible cross-responses to other interference gases (5 ppm trimethylamine, $NH_3$, HCHO, p-xylene, toluene and benzene). Cr-decorated tubular $SnO_2$nanofibers showed the selective detection of p-xylene at $400^{\circ}C$. In contrast, no significant selectivity to a specific gas was found in Ni-decorated tubular $SnO_2$ nanofibers. The selective and sensitive detection of gases using Pt-decorated and Cr-decorated tubular $SnO_2$ nanofibers were discussed in relation to the catalytic promotion of gas sensing reaction.

• Membrane Journal
• /
• v.23 no.1
• /
• pp.80-91
• /
• 2013

Metal-templated condensation of cyclohexanedione dioxime and phenylboronic acid in the presence of Fe(II) sulfate heptahydrate proceeds cleanly in methanol to furnish the Fe(II) clathrochelate. An organic/inorganic hybrid membranes composed of Fe(II) clathrochelate and polyethersulfone was prepared by using phase inversion method. For membrane preparation, the Fe(II) clathrochelate was highly soluble (3~5 g/L) in DMF, NMP, and DMAc, which meets the requirements for the solubility of metal complexes in polar aprotic solvent used in membrane preparation. It was stable even in the presence of strong acids, such as trifluorosactic acid (pKa = 0.3). It was characterized by UV-vis spectroscopy, and their stability in solution phase studied in the presence of (i) strong acids or (ii) competing chelates. Organic/inorganic hybrid membranes were prepared with polyethersulfone, polyvinylpyrrolidone, p-toluenesulfonic acid, Fe(II) clathrochelate and DMF by using nonsolvent induced phase inversion method. The addition of Fe(II) clathrochelate leads increase of surface pore density, mean pore size and flux. We can obtain highly asymmetric membranes by addition of Fe(II) clathrochelate.

• Journal of Pharmaceutical Investigation
• /
• v.6 no.3
• /
• pp.48-57
• /
• 1976

An enhancement in the dissolution rate of the drug should facilitate its GI absorption if the absorption process is dissolution rate limited. One of the need for the techniques that can potentially enhance the dissolution rate and extent of absorption of hydrophobic drugs is the formation of coprecipitates with pharmacologically inert, polymeric materials. The physicochemical modification offers the advantage of possibly enabling one to administer the drug orally in a form from which it is most available for GI absorption. Several $investigation^{1-15)}$ demonstrated that the formation of solid dispersions or coprecipitates of relatively water-insoluble drugs with various pharmacologically inert carriers can increase singnificantly their in vitro dissolution rates. However, little information is available in the literature related to the dissolution rate patterns of furosemide, a water-insoluble diurectices, with respect to the sort of copolymer and the ratio of coprecipitates as a function of time, respectively. The purpose of the present investigation was to ascertain, the general applicability of the copolymers to use fore more fast, enhanced dissolution techniques of furosemide. To accomplish the need for enhancement in the dissolution rate of furosemide, varying ratio coprecipitates with different water-soluble polymers, such as polyvinylpyrrolidone (PVP), polyethylene glycol 4000(PEG 4000), and polyethylene glycol 6000 (PEG 6000), were quantitatively studied by comparing their dissolution characteristics of furosemide. The dissolution patterns of pure furosemide, varying ratio furosemide-PVP coprecipitates, (1:2, 1:5, and 1:9(w/w)), furosemide-PEG 4000 coprecipitates (1:4, 1:9, and 1:19(w/w), furosemide-PEG 6000 coprecipitates(1:4, 1:9, and 1:19(w/w)), and the same ratio physical mixtures, respectively, were compared by the amount dissolved as a function of time.

• Reproductive and Developmental Biology
• /
• v.30 no.1
• /
• pp.21-26
• /
• 2006

This study was examined the effects of concentrations of polyvinylpyrrolidone(PVP) and supplementation of EGF, cysteine and PVP during in vitro maturation on the development of bovine embryos. In experiment 1, 0.1 to 3.0% PVP was supplemented to IVM medium before IVF. The development rates to the blastocyst stage was significantly higher in 0.5% PVP group than 3.0% PVP group (P<0.05). In experiment 2, EGF, rysteine and PVP were supplemented to IVM medium. The hight cleavage rate was obtained from cysteine group, but blastocyst formation rates did not differ among groups. The highest total cell number and inner cell mass (ICM) cell number were observed in cysteine group. In PVP group, ICM cell number was significantly low than those of cysteine and control groups (P<0.05). After embryo transfer, pregnancy rate was significantly low in PVP group compared to other groups (P<0.05). These results indicate that the supplementation of PVP in IVM medium support the embryo development, but has a deteriorate effect on the blastocyst quality.

• Journal of Embryo Transfer
• /
• v.14 no.2
• /
• pp.121-129
• /
• 1999

The objective of this study was to produce calves by transfer of embryos derived from slaughter house(SHD) and ultrasound-guided ovum pick-up (OPU). At 60 hrs after injection of 400 mg FSH dissolved in 25% polyvinylpyrrolidone(PVP) by single dose, ultrasound-guided follicular oocyte aspiration was ferformed. Day-7 and day-8 blastocysts produced by in vitro maturation (IVM), fertilization (IVF) and culture(IVC) of the oocytes derived from SHD and OPU were nonsurgically transferred into recipients. The results obtained were as follows. The cleavage rate and the development rate to blastocysts were not significantly (P<0.05) different between the oocytes obtained by SHD (72.9% vs. 34.1%) and OPU (75.9% vs. 38.4%). The oocyte recovery rate from the number of follicles by ultrasound-guided aspiration were not significantly (P<0.05) different between Holstein (61.7%) and Hanwoo (60.1%), but the rate of oocytes useful for IVF was significantly (P<0.05) higher in Hanwoo (69.3%) than Holstein (59.6%). The cleavage rate and the development rate to blastocysts was not significantly (P<0.05) different between Holstein (74.9% vs. 39.2%) and recipients on day 8 of estrus cycle resulted in 13 pregnancies (34.2%). One of them was sacrificed during gestation period due to mastitis and another was aborted spontaneous. The resulting 14 calves were morphologically normal at birth. Seventy eight fresh OPU-IVF embryos were transferred into 21 recipients on day 8 of estrus cycles, resulting in pregnancy of 12 recipients (41.4%). Two of them were sacrificed during gestation period due to mastitis and the other two were aborted. Nevertheless, the 11 OPU-calves have been born normally.

• Applied Chemistry for Engineering
• /
• v.28 no.5
• /
• pp.587-592
• /
• 2017

Uniform and optimum sized silver nanoplates were synthesized through the liquid phase reduction method by using silver nitrate solution as a starting chemical, dimethylformmide (DMF) as a reducing solvent, and polyvinylpyrrolidone (PVP) as reducing and surfactant agents. Synthesized and also film samples were characterized by using SEM, TEM, UV-Vis-NIR spectroscopy, particle size analyzer (PSA), and XRD. Triangle nanoplates with the size of 100~200 nm were found from the sample synthesized at $70^{\circ}C$ for 72 h using silver nitrate, DMF and 26 wt% PVP. The sample could reflect near-infrared light because it showed the maximum absorbing peak at about 1,000 nm. When the content or particle size of silver nanoplates increased in coating solutions, the transmittance decreased and the reflectance increased in film samples.

• Advances in nano research
• /
• v.4 no.3
• /
• pp.167-179
• /
• 2016

The detailed study of acute and sub-acute toxicity of the complex polyvinylpyrrolidon (PVP 20 kDa)-wrapped fullerene $C_{60}$ after intraperitoneal (ip) administration was carried out on adult male Wistar rats. The $LD_{50}$ value of $C_{60}/PVP$ complex was found to be 7, 8 g/kg. In sub-acute study which lasted for 30 days the rats were exposed to daily administration of the complex in the doses of 350 or 700 mg/kg. All animals survived during the study and had no significant changes in clinical signs, organ weight, hematological and biochemical parameters of blood. The electrophysiological properties of myocardium and the excretory function of kidneys remained normal. Histological analysis of liver, kidney and spleen at the end of the study also did not demonstrate toxic alterations. It was thus established that intraperitoneal administration of complex $C_{60}/PVP$ has no toxic effect. These results suggest that $C_{60}/PVP$ has no acute and sub-acute toxicity and is a perspective substance for potential application in biology and medicine.

• Korean Journal of Materials Research
• /
• v.23 no.11
• /
• pp.631-637
• /
• 2013

Synthesis of sub-micron $2SnO{\cdot}(H_2O)$ powders by chemical reduction process was performed at room temperature as function of viscosity of methanol solution and molecular weight of PVP (polyvinylpyrrolidone). Tin(II) 2-ethylhexanoate and sodium borohydride were used as the tin precursor and the reducing agent, respectively. Simultaneous calcination and sintering processes were additionally performed by heating the $2SnO{\cdot}(H_2O)$ powders. In the synthesis of the $2SnO{\cdot}(H_2O)$ powders, it was possible to control the powder size using different combinations of the methanol solution viscosity and the PVP molecular weight. The molecular weight of PVP particularly influenced the size of the synthesized $2SnO{\cdot}(H_2O)$ powders. A holding time of 1 hr in air at $500^{\circ}C$ sufficiently transformed the $2SnO{\cdot}(H_2O)$ into $SnO_2$ phase; however, most of the PVP (molecular weight: 1,300,000) surface-capped powders decomposed and was removed after heating for 1 h at $700^{\circ}C$. Hence, heating for 1 h at $500^{\circ}C$ made a porous $SnO_2$ film containing residual PVP, whereas dense $SnO_2$ films with no significant amount of PVP formed after heating for 1 h at $700^{\circ}C$.