• 제목/요약/키워드: Polyvinylpyrrolidone

검색결과 194건 처리시간 0.028초

폴리스타일렌 나노입자의 입도 조절에 관한 연구 (A Study on the Size Control of Nanosized Polystyrene)

  • 탕명녕;박용성
    • 공업화학
    • /
    • 제22권4호
    • /
    • pp.444-446
    • /
    • 2011
  • 계면활성제(polyvinylpyrrolidone, PVP)와 개시제(benzoyl peroxide, BPO)를 95% 알코올을 용매 속에 첨가하여 styrene monomer로부터 나노 크기의 균일한 분포 영역을 갖는 polystyrene (PS)을 제조하였다. Emulsion polymerization방법을 사용하였으므로 중합과정에서 PS입도 크기에 많은 변수가 영향을 미칠 수 있다. 본 연구에서는 단량체, 계면활성제 및 개시제 등의 농도 영향은 배제하고 가장 큰 변수들로 고려되는 교반 속도와 초음파 조사시간의 영향을 주로 연구하였다. 초음파 조사시간을 조절한 결과 400 nm의 나노 크기를 갖는 PS 입자를 제조할 수 있었다.

폐네오디뮴 자석 침출용액으로부터 Slurry 환원법을 이용한 철 Nano 분말 제조 (Preparation of Iron Nano-particle by Slurry Reduction Method from Leaching Solution of Spent Nd magnet)

  • 안종관;강윤지;유혜빈;윤호성
    • 자원리싸이클링
    • /
    • 제23권6호
    • /
    • pp.22-29
    • /
    • 2014
  • 네오디뮴 폐자석 침출액으로부터 희유금속인 네오디뮴을 회수하는 연구와 함께 네오디뮴과 같이 침출되는 철의 부가가치를 높이는 연구가 필요하다. 본 연구에서는 네오디뮴과 같이 침출되는 철의 유용자원화를 위한 기초연구로 철 나노분말을 제조하는 실험을 수행하였다. 본 연구는 $FeCl_3$ 용액을 철 분말 원료로, 분산제는 $Na_4P_2O_7$와 Polyvinylpyrrolidone를 이용하였고, 환원제로는 $NaBH_4$, 철 나노분말 핵생성 촉진제 seed로 염화팔라듐을 사용하였다. 제조한 철 나노분말을 XRD, SEM을 이용하여 분말의 형상 및 크기를 분석하였다. Fe와 $NaBH_4$의 몰 비를 1 : 5로 조절하여 철 분말을 제조하였으며, 이 때 철 분말은 구형이었으며, 입도는 약 50 ~ 100 nm 였다. 분산제 $Na_4P_2O_7$의 경우 100 mg/L에서 철 이온의 제타포텐셜이 음의 값을 가졌고, $FeCl_3$ 과 PVP와 Pd의 질량비 1 : 4 : 0.001에서 분산이 양호하고, 입도가 100 nm 인 철 나노분말을 합성하였다. 같은 반응 조건에서 폐 Nd 침출액의 Fe 이온을 pH를 조절하여 슬러리화한 후 실험을 진행한 결과, pH 9에서 구형의 철 분말을 합성할 수 있었으며, 20 L 이상의 Scale-up 공정에서는 분산제 없이 환원제로 175 nm 크기의 철 분말을 합성할 수 있었다.

네오디뮴 폐자석 재활용을 위한 화학환원법을 이용한 철 나노 분말 제조 (Synthesis of Iron Nanopowder from FeCl3 Solution by Chemical Reduction Method for Recycling of Spent Neodymium Magnet)

  • 하용황;강윤지;최승훈;윤호성;안종관
    • 한국산학기술학회논문지
    • /
    • 제13권12호
    • /
    • pp.6187-6195
    • /
    • 2012
  • 네오디뮴 폐자석 침출액으로부터 희유금속인 네오디뮴을 회수하기 위해서는 네오디뮴과 같이 침출되는 철의 부가가치를 높이는 연구가 필요하다. 본 연구에서는 네오디뮴과 같이 침출되는 철의 유용자원화를 위한 기초연구로 철 나노분말 제조하는 실험을 수행하였다. 본 연구는 $FeCl_3$ 용액을 철 분말 원료로, 분산제는 $Na_4O_7P_2$와 Polyvinylpyrrolidone를 이용하였고, 환원제로는 $NaBH_4$, 철 나노분말 핵생성 촉진제 시드(seed)로 염화팔라듐을 사용하였다. 제조한 철 나노분말을 XRD, 전자현미경(SEM) 및 PSA 등을 이용하여 분말의 형상 및 크기 등을 분석하였다. 철과 $NaBH_4$의 농도비가 1 : 5이며, 반응시간이 30분 이상인 경우에서 철 분말이 제조되었으며, 이때 철 분말은 구형이었으며, 입도는 약 50 nm ~ 100 nm 크기였다. 분산제 $Na_4O_7P_2$의 경우 100 mg/L에서 철이온의 제타포텐셜이 음의 값을 가지므로 100 mg/L로 일정하게 하고, PVP와 Pd의 농도를 다양하게 하였을 경우, $FeCl_3$와 PVP와 Pd의 질량비 1 : 4 및 1 : 0.001에서, 분산이 양호하고, 입도 100 nm 크기인 철 나노분말을 합성하였다.

Effects of Sorghum Tannins, a Tannin Binder (Polyvinylpyrrolidone) and Sorghum Inclusion Level on the Performance of Broiler Chicks

  • Ambula, M.K.;Oduho, G.W.;Tuitoek, J.K.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제14권9호
    • /
    • pp.1276-1281
    • /
    • 2001
  • The feeding values of four indigenous Kenyan sorghum cultivars and the effects of polyvinylpyrrolidone (PVP) on the utilization of high tannin sorghum by broiler chicks were studied in two 3-week feeding trials. In Experiment 1, one hundred and five broiler chicks (initial average weight 97 g) were randomly assigned to each one of the seven grain-soybean meal diets. The diets consisted of maize [diet 1; no assayable tannin], white sorghum [diet 2; 0.59% catechin equivalents (CE)], cream sorghum [diet 3; 0.94% CE], light brown sorghum [diet 4; 2.71% CE] and dark brown sorghum [diet 5; 3.54% CE]. Diets 6 and 7 were included to test the possibility of overcoming the detrimental effects of sorghum tannins by adding PVP at 0.25% and 0.5% to dark brown sorghum, which resulted in dietary tannin levels of 3.46% and 3.38% CE respectively. In Experiment 2, the effects of tannin on dry matter digestibility (DMD) and nitrogen (N) retention were studied in a 3-week substitution assay in which high tannin sorghum (5% CE) was substituted for white maize at different inclusion levels. Ninety broiler chicks aged 7 days (initial average weight 102 g) were randomly assigned to each one of the six diets. The diets consisted of corn gluten meal and fishmeal as protein sources plus maize [diet 1] and high tannin sorghum at different inclusion levels [diets 2, 3, 4, 5 and 6], resulting in dietary tannin levels of 0, 1.25%, 1.66%, 2.08%, 2.5% and 3.2% CE respectively. Feed intake, feed efficiency and body weight gain were measured weekly. In Experiment 2, tannin absorption, DMD and N retention were measured on days 19, 20 and 21. The results of Experiment 1 showed that feed intake, feed efficiency and body weight gain were all affected by treatment (p<0.05). Diets 1, 2 and 3 gave similar body weight gains and all were better than diets 4 and 5 (i.e. 504, 517, 473 g, vs. 256, 267 g). Similarly, feed efficiencies were higher (p<0.05) for diets 1, 2 and 3 compared to diets 4 and 5 (0.4, 0.42, 0.39 vs. 0.21, 0.23). When 0.25% PVP was added to the dark brown sorghum (diet 6) there was no significant improvement in chick performance (p>0.05). However, addition of 0.5% PVP (diet 7) resulted in significant improvement (p<0.05) in body weight gain compared to the untreated dark brown sorghum. Overall, PVP did not completely overcome the deleterious effects of tannins. The results of Experiment 2 indicate that sorghum inclusion level and subsequent tannin level had no effect on feed intake, feed efficiency, weight gain, DMD and N retention. The above results suggest that tannin level should be limited to below 2.71% CE in broiler chick diets containing 20% CP and 0.4% methionine. However, in diets with 23% CP and 0.8% methionine tannin level of up to 3.2% will not affect performance. Consequently high tannin sorghum (5% CE) can be used to substitute for white maize by up to 100% in broiler chick diets.

중간기공을 갖는 미세다공성 탄소 분리막의 기체 투과 특성 (Gas Separation Properties of Microporous Carbon Membranes Containing Mesopores)

  • 신재은;박호범
    • 멤브레인
    • /
    • 제28권4호
    • /
    • pp.221-232
    • /
    • 2018
  • Poly(imide siloxane)(Si-PI)와 polyvinylpyrrolidone (PVP)를 혼합한 고분자를 사용하여 실리카가 함유된 탄소 분리막을 제조하였다. 고분자 혼합물의 열분해에 의해 제조 된 다공성 탄소 구조의 특성은 두 고분자의 미세 상 분리 거동과 관련이 있다. Si-PI와 PVP의 고분자 혼합물의 유리 전이 온도(Tg)는 시차 주사 열량계를 사용하여 단일 Tg로 관찰되었다. 또한 $C-SiO_2$ 막의 질소 흡착 등온선을 조사하여 다공성 탄소 구조의 특성을 규명했다. Si-PI/PVP로부터 유도 된 $C-SiO_2$ 막은 IV형 등온선을 나타내었고 중간기공의 탄소 구조와 관련된 히스테리시스 루프를 가지고 있었다. 분자 여과 확인을 위해서, Si-PI/PVP의 비율과 열분해 온도 및 등온 시간과 같은 열분해 조건을 다르게 하여 $C-SiO_2$ 막을 제조하였다. 결과적으로, 120분 간의 등온 시간 동안 $550^{\circ}C$에서 Si-PI/PVP의 열분해에 의해 제조된 $C-SiO_2$ 막의 투과도는 820 Barrer ($1{\times}10^{-10}cm^3(STP)cm/cm^2{\cdot}s{\cdot}cmHg$)이었으며, $O_2/N_2$ 선택도는 14이었다.

교정장치에 의해 유발된 구내궤양 치료에 대한 Polyvinylpyrrolidone-sodium hyaluronate (Aloclair$^{TM}$)의 임상적 효과 (Efficacy of Aloclair$^{TM}$ for Treatment of Intraoral Ulcer Caused by Orthodontic Appliance)

  • 이주희;이상민;박인영
    • 구강회복응용과학지
    • /
    • 제28권2호
    • /
    • pp.109-118
    • /
    • 2012
  • 본 연구는 교정장치에 의해 자극되어 나타나는 구강내 통증을 감소시키는 Polyvinylpyrrolidone-sodium hyaluronate의 효과를 평가해보기 위해 시행되었다. 100명의 환자에게 Aloclair$^{TM}$를 용법에 맞게 사용하도록 지시하였고 총 3개의 군으로 나누어 통증과 불편감을 조사하였다. 각 설문지에서 1.신환으로 bracket bonding을 처음 한 경우로 교정용 왁스 사용과 비교하여 조사한 군, 2.부가적인 장치 (미니스크류, 제 2 대구치 장치 부착 등)를 장착한 경우, 3.교정장치로 인해 구강내 궤양이 생겨 내원한 경우로 사용 전, 후의 통증과 불편감을 비교하였다. Aloclair$^{TM}$사용 후 통증이 줄어들기 시작한 시간은 평균 3.5분 후이며 효과 지속시간은 평균 2.7시간이었다. 모든 군에서 Aloclair$^{TM}$를 사용한 직후부터 시간에 따라 통증 정도가 유의성 있게 감소하였다. 1군에서 Aloclair$^{TM}$가 교정용 왁스에 비해 평균 통증의 정도가 높게 나왔지만 Aloclair$^{TM}$역시 시간에 따라 통증이 유의성 있게 감소하였다. 3군의 경우 이미 궤양이 존재하는 환자이기 때문에 Aloclair$^{TM}$에 대한 만족도가 더 높았고 통증도 유의성 있게 감소하였다. 결론적으로 Aloclair$^{TM}$는 적용하기도 비교적 쉽고 구내 궤양에 대한 통증완화에 효과적이어서 교정치료 중인 환자들에게 많은 도움이 될 수 있을 것으로 보인다.

열분해성 고분자 도입에 따른 탄소분자체막의 기체 투과 특성 (Carbon Molecular Sieve Membranes Derived from Thermally Labile Polymer Containing Polyimide and Their Gas Separation Properties)

  • Young Moo Lee;Youn Kook Kim;Ji Min Lee;Ho Bum Park
    • 멤브레인
    • /
    • 제13권3호
    • /
    • pp.182-190
    • /
    • 2003
  • Polyvinylpyrrolidone을 포함하는 폴리이미드 전구체의 열분해 공정을 통해 탄소분자체막을 제조하였으며 열분해성 고분자를 포함하는 전구체를 통해 제조된 막의 구조 및 기체 투과 특성에 대해 연구 하였다. 열분해성 고분자를 포함하는 전구체의 열적 특성을 조사한 결과 열적으로 안정한 폴리이미드의 경우 $550^{\circ}C$에서 분해되는 것을 확인할 수 있었으며 열분해성 고분자의 경우 $400^{\circ}C$에서 분해가 시작되는 것을 TCA를 통해 확인하였다 제조된 탄소분자체막의 기체 투과 특성을 조사한 결과 최종 열분해 온도가 증가됨에 따라 기체 투과도는 감소하였으며 열분해성 고분자를 포함한 전구체로부터 제조된 탄소분자체막의 경우 기체 투과가 향상됨을 알 수 있었다. 열분해성 고분자를 함유하는 전구체로부터 $550^{\circ}C$에서 열분해를 통해 제조된 탄소분자체막의 경우 $O_2$ 투과도 808 Barrer $[10^{-10}cm^3 (STP)cm/cm^2scmHg]$$O_2$/$N_2$선택도 7을 나타내었다.

Zipeprol 내용액제의 고미교정에 관한 연구 (The Mitigation of Bitterness of Zipeprol Solution)

  • 김종국;최한곤
    • 약학회지
    • /
    • 제31권1호
    • /
    • pp.42-44
    • /
    • 1987
  • Ziperol, anti-tussive, is considerably bitter. Therefore, it is necessary to mitigate the bitterness in ziperol syrup for children. In this experiment, it was attempted to mitigate the bitterness of zipeprol by means of polymers such as $\beta$-cyclodextrin, arabic gum, HPMC(hydroxypropyl methylcellulose), PEG 2000(polyethyleneglycol 2000), PVP(polyvinylpyrrolidone). Caffeine was used as the reference standard of bitterness. In the result of this experiment, $\beta$-cyclodextrin, would mitigate the bitterness of zipeprol more largely than any other polymers. Arabic gum was the second choice which would mitigate the bitterness of zipeprol.

  • PDF

Preparation and Evaluation of Bupivacaine-loaded Microspheres by Solvent Extraction Method

  • Kim, Min-Soo;Hwang, Sung-Joo
    • 대한약학회:학술대회논문집
    • /
    • 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
    • /
    • pp.299.2-300
    • /
    • 2003
  • Various bupivacaine-Ioaded microspheres were prepared with poly (d,l-Iactide) (PLA) by solvent extraction method. The internal solution of polymer(PLA R104) and drug in glacial acetic acid was introduced into the external phase of polyvinylpyrrolidone (PVP K-30) in polyethyleneglycol (PEG), and emulsified to be an oil-in-oil (o/o) emulsion. The o/o emulsion was poured to the buffer solution. (omitted)

  • PDF

Effects of Binders on Pharmaceutical Properties of Aspirin Tablets

  • Kwon, Kwang-Hyen;Shin, Young-Hee;Lee, Chi-Ho
    • Journal of Pharmaceutical Investigation
    • /
    • 제15권3호
    • /
    • pp.140-150
    • /
    • 1985
  • The influences of three binders, hydroxypropyl cellulose(HPC), microcrystalline cellulose (MCC) and polyvinylpyrrolidone(PVP), on the transmittance of compression pressure from upper punch to lower punch and the disintegration of aspirin tablets prepared by direct compression were studied. The optimum concentration of three binders for the disintegration of aspirin tablets was about 20w/w% and several physical properties of the powder and tablets were also investigated. The tablet machine was specially made for the measurement of compression pressure of the tablets.

  • PDF