• Korean Chemical Engineering Research
• /
• v.48 no.5
• /
• pp.615-620
• /
• 2010

In this study, five series of novel polyurethanes was synthesized by the polyaddition reaction of diisocyanates such as 2,6-tolylene diisocyanate(2,6-TDI), 2,5-tolylene diisocyanate(2,5-TDI), 2,4-tolylene diisocyanate(2,4-TDI), and 1,4-phenylene diisocyanate(1,4-PDI), hexamethylene diisocyanate(HDI) with 4,4'-Bis(3-hydroxypropoxy)biphenyl (BP3), 4,4'-bis(3-hydroxypropoxy)biphenyl exhibited a smectic type mesophase. Monotropic mesophase was found for all synthesized liquid crystalline polyurethanes except HDI/BP3. In contrast, 1,4-PDI/BP3 without a methyl substituent in the phenylene unit exhibited no explicit mesomorphic behavior, which was confirmed by DSC and polarizing microscopy experiments. Structures of the compound were identified by FT-IR and $^1H$-NMR spectroscopies. Their phase transition temperatures and thermal stability were also investigated by differential scanning calorimetry(DSC), polarized optical microscopy(POM) and x-ray diffraction analysis.

• Polymer(Korea)
• /
• v.29 no.2
• /
• pp.172-176
• /
• 2005

Environmentally friendly water dispersion polyurethanes containing fluorine were prepared with a fluorinated polyol having $62\%$ of fluorine $(Fluorolink^{(R)}\;M_n\;1000)$. In order to control the fluorine contents of the synthesized polyurethanes polytetramethylene glycol (PTMG2000) and $Fluorolink^{(R)}$ were mixed at assigned ratios and reacted with isophorone diisocyanate (IPDI) as a diisocyanate used. Introducing hydrophilic anion to the polymer chain was achieved by applying dimethyl propionic acid (DMPA). The ionic groups were neutralized with triethyl amine (TEA) before dispersion into water. Chain extension was executed by adding ethylene diamine at the final stage. Mechanical properties of the polymers showed that modulus increased with increasing $Fluorolink^{(R)}$ content. Surface energy values obtained from contact angle measurement decreased with increasing $Fluorolink^{(R)}$ content up to $20\%$. We expect that the synthesized polyurethanes present reliable effect from the fluorine atoms incorporated even at a small amount of $Fluorolink^{(R)}$.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.247-252
• /
• 2006

The long-term use of indwelling urinary catheters can allow bacterial adhesion to their surfaces, followed by the catheter-associated urinary tract infection. In an attempt to minimize the bacterial adhesion, various amphiphilic polyurethanes (APUs) were synthesized as potential coating materials for urinary catheters. By varying composition of the soft segments such as PEO, PTMO, and PDMS, four different polyurethanes were synthesized. All the APU-coated urinary catheters had the smooth surfaces and showed higher hydrophilicity, compared to the commercial silicone catheters. In particular, the use of APUs with the higher PEG content significantly augmented hydrophilicity and remarkably reduced the total amount of bacteria adhering to the surface. Overall, the APUs prepared in this study provided the promising potential as coating materials for urinary catheters.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.152-157
• /
• 2006

Anionic or Zwitter-ionic waterbone polyurethanes (WPU) based on mixtures of hydroxy terminated poly-butadiene and poly(propylene glycol) were prepared and their physical properties were characterized. Particle size of WPU increased with increasing the content of HTPB. It was observed that the microphase separation of soft segments and hart segments increased with increasing the content of HTPB in the WPUs. Zwitter-ionic WPU showed stronger hydrogen bonds between molecules than anionic WPU after drying. Polyurethane films obtained after drying of WPUs exhibit besmechanical properties when the HTPB content among polyols for WPUs were 25wt%. It is postulated that such mechanical properties resulted from different microphase separation of soft segments and hard segments of polyurethane films obtainec after drying of WPUs.

• Clean Technology
• /
• v.14 no.1
• /
• pp.29-34
• /
• 2008

Copolymerizations of propylene oxide (PO) and phthalic anhydride (PA) have been performed in the presence of double metal cyanide (DMC) catalyst as a means of incorporating ester groups in the polyol backbone. DMC catalyst was effective for the copolymerization and the reactivity ratios measured by modified Kelen-$T{\ddot{u}}d{\ddot{o}}s$ equation were $r_1(PA)\;=\;0$, and $r^2(PO)\;=\;0.248$. Four different Polyol samples containing 1.0, 2.1, 7.52, and 11.42 mol% of PA unit were utilized for the synthesis of thermoplastic polyurethanes of their hard segments of 19 wt%. As the incorporated amount of PA increases, the elongation of the resulting polyurethane decreases and the tensile strength and the tensile modulus increase. The modulation of the incorporated amount of PA into polyol backbone was proven to be a feasible way to tune the physical properties of polyurethanes.

• Journal of the Korean Institute of Gas
• /
• v.2 no.1
• /
• pp.59-65
• /
• 1998

Morphology and thermal properties of polyurethane synthesized from 4,4'-diphenylmethane diisocyanate (MDI), polyester polyol, and 1,4-butane diol are investigated using fourier transform infrared spectroscopy (FT-IR), differential scanning calorimeter (DSC), and dynamic mechanical thermal analysis (DMTA). From the FT-IR study, it is found that the stretching peaks of hydrogen bonded N-H and C=O are shifted to the low frequencies with the increase of hard segment content of the polyurethanes. The shift of the stretching peaks of hydrogen bonded N-H and C=O indicates that the degree of hydrogen bonding is increased. From the DSC study, it appears that the glass transition temperature ($T_g$) of the polyurethanes is increased with the increase of the hard segment content. Also, it is found that the polyurethanes investigated in this study have the homogeneous network structure due to the high functionality of the MDI. From the DMTA study, transition of the soft segment was not found. Therefore it is concluded that the polyurethanes investigated in this study have the one-phase morphology which is consistent with the DSC results.

• Clean Technology
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2019

Recently, attention has been paid to obtaining bio-polyols from renewable resources. Successful use of these natural ingredients successfully produced in the industry for the synthesis of various polyurethanes is a very important task. In this study, a series of dimethylformamide (DMF) based polyurethanes were synthesized from methylene diphenyl diisocyanate (MDI)/1, 4-butanediol and bio-polyol (polytrimethylene ether glycol based on 1, 3-propanediol : B-POL)/polyester polyol (polyadipate diol based on 1,4-butandiol : H-PET). The effect of different ratio of bio-polyol (B-POL)/polyester polyol (H-PET) on the physical properties of polyurethane was investigated. As the B-POL content in B-POL/H-PET mixture increased, the glass transition of soft segment (Tgs) and tensile strength of polyurethane decreased, however, the elongation at break and tear strength increased. On the other hand, artificial leather was produced by wet process using synthesized DMF-based polyurethanes. It was found that there was almost no difference in the effect of the B-POL/H-PET composition on the average size and density (the number of cells per unit volume) of the porous cells formed in artificial leather. These results show that there is no problem in using bio-polyol (B-POL) based polyurethane for artificial leather produced by wet process.

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.253-254
• /
• 2007

• Polymer Science and Technology
• /
• v.5 no.6
• /
• pp.537-543
• /
• 1994

• Proceedings of the KTCVS Conference
• /
• 1993.06a
• /
• pp.130-130
• /
• 1993