• 한국의류산업학회지
• /
• 제20권5호
• /
• pp.600-607
• /
• 2018

Polypropylene fibers, while having many advantages such as light weight, sweat fast drying, water-repellent, drainage, thermal insulation, anti-static property has a drawback in dyeing. In recent years, the development of dyeable polypropylene fibers has expanded its value in the textile market. The purpose of this study is to fabricate composite spun yarns using polypropylene, acrylic, rayon and wool and to analyze tensile properties, uniformity characteristics, bending properties, hairiness, and surface shape according to the degree of fineness and blended ratio. The specimens consisted of 100% polypropylene spun yarn pp30, pp40 and ppa(pp/acrylic), ppr(pp/rayon), ppw(pp/wool), 5 altogether sed in this study. The results of the study are as follows. The breaking strength of polypropylene spun yarn blended with rayon and acrylic was higher than that of 100% polypropylene spun yarn. The polypropylene spun yarn is higher the fineness been shown to decrease the breaking strength and elongation. The bending properties of polypropylene spun yarns were in the order of ppa>ppr>pp40>pp30>ppw. The unevenness of ppw, ppr, and ppa was higher than pp40 and pp30. With the exception of ppw with crimp properties, pp30 and pp40 were found to have a hairiness index greater than ppr, ppa. In the microscopic photographs of polypropylene spun yarn, pp30, which had the highest hairiness index, was found to have a thick yarn and a large number of hairs, and ppw had hairs of 3 mm or more protruding elongated outwardly.

• 접착 및 계면
• /
• 제6권2호
• /
• pp.1-5
• /
• 2005

Single crystals of metallocene-catalyzed isotactic polypropylene (iPP) and/or syndiotactic PP (sPP) were prepared and preliminarily characterized. The crystallization was performed utilizing 0.1 % by weight concentrations of each PP in o-xylene in the range of temperature of $40{\sim}90^{\circ}C$. Following the XRD patterns, samples were ${\alpha}$-iPP and antichiral Cell III of sPP. The XRD pattern of iPP shows three ${\alpha}$-form peaks due to the (110), (040), (130) planes at $2{\theta}=14.2^{\circ}$, $17^{\circ}$, $18.8^{\circ}$, respectively. The XRD pattern of sPP is characterized by the presence of the (020) reflection at $16^{\circ}$. The melting point ($123^{\circ}C$ and $148^{\circ}C$, respectively) of the metallocene catalyzed iPP and sPP were generally lower than that of conventional PP ($160{\sim}170^{\circ}C$) due to the misinsertion of the monomer. When metallocene-catalyzed iPP samples were crystallized isothermally from solution grown at a lower temperature, lozenge shape single crystals were observed by transmission electron microscopy (TEM).

• Elastomers and Composites
• /
• 제57권2호
• /
• pp.40-47
• /
• 2022

The effects of maleic-anhydride-grafted polypropylene (PP-g-MAH) and montmorillonite (MMT) on the wear resistance of polypropylene (PP) were investigated. The surface of MMT was modified with 3-aminopropyltriethoxysilane, and the interfacial interaction between PP and MMT was improved using PP-g-MAH. Fourier-transform infrared spectroscopy was used to confirm that silane was grafted on the surface of MMT. The Taber abrasion test and scanning electron microscopy were used to determine the wear resistance and observe the surface morphology of PP, respectively, after wear testing. Energy-dispersive X-ray spectroscopy was used to compare the effects of PP-g-MAH and silane modification of MMT on the dispersion of MMT. The results indicated that silane was successfully grafted onto the surface of MMT. Moreover, the wear resistance of PP was improved by the addition of MMT. The wear resistance of PP composites comprising silane-modified MMT and PP-g-MAH was higher than those of other PP composites. This was attributed to silane improving the interfacial interaction between MMT and PP.

• Elastomers and Composites
• /
• 제55권1호
• /
• pp.1-5
• /
• 2020

This study examined the effects of the addition of maleic anhydride-grafted polypropylene (PP-g-MA) and polyolefin elastomer (POE) on polyamide 66 (PA66) and polypropylene (PP) blends. The blends of PA66/PP with PP-g-MA and POE were prepared using a twin screw extruder. Mechanical testing results revealed that the tensile, flexural, and izod impact strengths of the blends were maximized at a PP-g-MA content of 2 phr. The increased mechanical strength of the blends with PP-g-MA was attributed to the compatibilizing effect of the PA66 and PP blends. In addition, as the POE content increased, the impact strength of the blends increased. However, at a high POE content, the tensile and flexural strengths decreased, seemingly because of the lower mechanical properties of POE.

• 폴리머
• /
• 제38권5호
• /
• pp.613-619
• /
• 2014

The polypropylene/polyamide elastomer (PP/PAE) blends were prepared by melt mixing. PP and PAE in PP/ PAE were immiscible completely. The size of PAE domains was large and the clear gap in the interface between PP and PAE existed, which did not meet the conditions enhancing toughness of polymers by elastomer. Therefore, maleic anhydride grafted polypropylene (MP) was used to improve the miscibility between PP and PAE. The miscibility between PP and PAE was improved and the size of dispersed phase PAE decreased by introducing MP. The crystallization of PP became easier by introducing PAE as a nucleating agent. With the increase of PAE content, the melt-crystallization temperatures of PP components in PP/PAE/MP blends increased gradually. The melt-crystallization of the polytetramethylene oxide segment of PAE component in PP/PAE blends were hampered by PP component. In addition, PAE can enhance significantly the toughness of PP, and the tensile strength and modulus did not decrease.

• Fibers and Polymers
• /
• 제4권4호
• /
• pp.210-214
• /
• 2003

Siloxylated polypropylene fibers composed of polypropylene (PP) and aluminosiloxane (AS) were prepared by melt blending followed by spinning. The effects of blend compositions on the thermal behaviors, surface and tensile properties of PP/AS blend fibers were investigated by DSC, WAXD, SEM, static honestometer, etc. The heat of fusion of PP/AS blends decreased with increasing AS contents. In addition, the peak intensity of PP/AS blends in X-ray diffraction patterns decreased with increasing AS contents. It was observed that the silicone molecules exist and well distribute on the surface of siloxylated polypropylene fibers. From the results of the half-life period measurements, the anti-static properties of PP fibers siloxylated with AS was found to be significantly modified.

• 폴리머
• /
• 제25권5호
• /
• pp.707-718
• /
• 2001

폴리프로필렌 (PP)은 낮은 밀도, 우수한 내열성, 내화학성, 가공성과 더불어 재활용이 용이한 플라스틱이다. 하지만 폴리프로필렌의 발포에 대한 연구는 그리 많지 않다. 본 연구에서는 화학적 발포제를 사용하여 발포 폴리프로필렌을 만들고자 하였다. 폴리프로필렌의 가공온도에서 유동성과 발포체의 유연성을 높이기 위해 에틸렌/옥텐 공중합체 (mPE)를 폴리프로필렌에 용융 블렌드하였다. 발포에 앞서 발포체의 발포배율과 셀구조에 미치는 상분리 거동의 영향을 알기 위해 PP/mPE 블렌드 상분리 거동을 조사하였다. PP/mPE 블렌드의 강 거동은 블렌드 조성과 mixing torque ratio, 그리고 mixing rpm에 영향을 받았다. PP 기질에 mPE가 분산상으로 존재하는 블렌드를 발포시켰을 때 높은 배율과 안정한 셀 구조를 가지는 발포체를 얻을 수 있었다.

• 한국응용과학기술학회지
• /
• 제28권4호
• /
• pp.402-409
• /
• 2011

Compatibility and properties of PP/N66 blends with or without PP-g-MAH as a compatibilizer were investigated by DSC, SEM and universal testing machine. Morphological studies revealed that PP and N66 were incompatible and addition of PP-g-MAH was very effective to enhance the compatibility between PP and N66. The compatibilization effect between N66 and PP-g-MAH was based on the reaction between the amine end group of N66 and anhydride group in PP-g-MAH. The crystallization and melting behavior of PP/N66 blends were investigated and the results of analyses for enthalpy changed were discussed. The Izod impact strength could be improved by optimizing the compatibilizer concentration. Tensile strength, elongation at break, notched Izod impact strength were increased with using compatibilizer, however, both the compatibilized and the noncompatibilizer blends did not show any big difference in the flexural modulus.

• 한국염색가공학회지
• /
• 제10권5호
• /
• pp.13-18
• /
• 1998

Polypropylene-ethylene/vinyl acetate copolymer (PP-EVA) blends were prepared by mechanical blending using relatively semi-crystaline ethylene-vinyl acetate copolymer and polypropylene. In order to obtain dyeable PP fiber, PP-EVA blends were prepared using below 10wt.％ of EVA and formed a filament by the melt spinning method. The resultant fibers had tensile strengh of 2∼3g/d, elongation of 330∼600%, initial modulus of 22∼46g/d, and exhibited markedly improved dyeing property.

• 한국응용과학기술학회지
• /
• 제30권3호
• /
• pp.387-393
• /
• 2013

The crystallization of polypropylene (PP) particles in PP/decalin solution was conducted using the thermally induced phase separation(TIPS). During the control of particles sizes followed by the cooling of PP/decalin solution, particles were formed controllably, the concentrated PP resulted in an increase in the average diameter of PP particles. The effects of surfactants changes on particles sizes were investigated by using a field emission scanning electron microscope (FE-SEM). The PP crystals showed spherical shapes with a diameter 5~18 ${\mu}m$. Additionally, as an effect of concentration of PP, the size distribution of the PP particles became broad with higher concentration of PP in the solution.