• Journal of the Korean Applied Science and Technology
• /
• v.29 no.2
• /
• pp.356-363
• /
• 2012

In this study we synthesis Hybrid resin(WPC) by milk casein and waterborne polyurethane(WPU). Then we experiment how casein effect to Hybrid resins in Full-Grain leather coatings. According to measured data for solvent resistance, WPU resin and Hybrid resins had good property. As test of tensile strength, WPU had most low strength(2.130 $kg_f/mm^2$) and WPC-3(WPU 91: casein resin 9) had most high strength(2.191 $kg_f/mm^2$). Also we knew that most good property of abrasion is WPC-3(50.090 mg.loss). In elongation case, WPU had most good result(637 %) in this experiment.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.4
• /
• pp.1358-1364
• /
• 2019

The mechanical properties of Heavy duty resin of synthetic polyurethane-epoxy resin for stainless steel were measured by SEM, FT-IR, tensile properties, and specific mass loss by EIS analysis, etc. As interest in eco-friendly medium coatings increased, the Heavy duty coatings were synthesized for various metals such as stainless steel composed of Polyol, MDI, water bored Epoxy resin, filling agent, silicon surfactant, catalyst etc. The coatings of synthetic Heavy duty resin were increased tensile strength due to various temperature change, and the low-Specific Mass Loss was measured in a highly electrolytic solution. In conclusion, the Heavy Duty coatings composed of polyurethane and waterbored Epoxy resin were synthetic microstructure with cross linkage can be good material for coating of anticorrosion of metal substrates such as stainless steel.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.4
• /
• pp.263-270
• /
• 2012

Ascorbic acid (Vitamin C) becomes unstable in the aqueous phase by oxygen, light and alkali, etc. The properties are limited in application to cosmetics. The most important factor that determines the destabilization of ascorbic acid in the aqueous phase was tried to understand considering its molecular deformation and degradation. In this study, we changed the polyols and emulsification technique for the stability of ascorbic acid. Then we observed the color and concentration change of ascorbic acid at room temperature and high temperature ($42^{\circ}C$) for 6 weeks and identified the stability using HPLC regularly. As a result, we found that glycerin was the most appropriate polyol for stability of the ascorbic acid. Also the technique of nonaqueous emulsification stabilized ascorbic acid than P/S emulsification. Also, P/S emulsification, glycerin was more stable than propylene glycol. By the results we suggest that ascorbic acid could be stabilized by nonaqueous emulsification method and this data could be applied to stabilization methods for cosmetic products.

• Polymer(Korea)
• /
• v.34 no.5
• /
• pp.442-449
• /
• 2010

Polyurethane(PU) prepolymer was synthesized from ethylene oxide/propylene oxide(EO/PO) random polyether polyol, toluene diisocyanate and chain extender such as ethylene glycol and 1,4-butanediol. PU foams having various compositions were fabricated from PU prepolymers with different hard segment contents(%) and mixed foaming solution of different compositions. PU foam from chain extender-introduced PU prepolymer and mixed foaming solution containing glycerin showed better mechanical property than other groups. Various PU foams were tested on their mechanical property, moisture vapor transmission rate, absorption speed, absorptivity, morphology and cell culture test. According to the test, the PU foam fabricated from chain extender-introduced PU prepolymer and mixed foaming solution containing optimum composition of F-68, glycerin and CMC was found to have the best property for wound dressing materials. From in vivo animal study, it was confirmed that above PU foam showed rapid wound recovery.

• Polymer(Korea)
• /
• v.34 no.1
• /
• pp.8-13
• /
• 2010

The physical properties of polymeric foams depend on the density of foams, physical properties of base polymers, the content of open cells, and cell structures including the size and its distribution, the shape of cell, and the thickness of skin layer. The foam density is affected by the chemistry of raw materials, the concentration of crosslinking agent and the blowing agent as well as the operating parameters during production process. In this study, the basic formulations of foams are composed of polyester polyol, MDI, amine catalyst, tin catalyst, silicone surfactant, and water. Cross-linking density of polyurethane was increased by using chain extenders. Also, the mechanical properties of polyurethane foam were improved by using the inorganic fillers (silica 1,2 and talc 1,2) having different $SiO_2$ contents and particle sizes. We investigated the properties of modulus, tensile strength, compressive strength and hardness of foams obtained by changing kind of inorganic filler and chain extender, and observed the distribution of inorganic filler as well as variation of cell size within the foams by electron microscopy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.10
• /
• pp.718-725
• /
• 2007

In the general vapor-compression refrigeration system, refrigeration lubricant circulates in refrigeration system with refrigerant. Knowledge of the amount of circulating lubricant is very important to exactly calculate capacity of the refrigeration system. An experimental study was conducted to estimate the oil concentration of a flowing $CO_2/Oil$ mixtures. POE and PAG oil are considered as test lubricants in this study. Performance tests were conducted under simulated liquid conditions for $CO_2/POE$ oil mixture in oil concentration of 0 to 10 weight-percent and $CO_2/PAG$ oil mixture in oil concentration of 0 to 6 weight-percent in the temperature ranges of $-5^{\circ}C\;to\;15^{\circ}C$. The results obtained indicate specific gravity of $CO_2/Oil$ mixture is increased as oil concentration is increased and as temperature of mixture is decreased. Oil concentration correlation of $CO_2/POE$ oil mixture and $CO_2/PAG$ oil mixture is suggested, based on the measurement of specific gravity and temperature. This correlation enable to predict the oil concentration without extraction of the mixture and can be applied for $CO_2/POE$ mixtures and $CO_2/PAG$ mixtures.

• Korean Journal of Pharmacognosy
• /
• v.39 no.3
• /
• pp.165-173
• /
• 2008

Aldose reductase (AR), the principal enzyme of the polyol pathway, has been shown to play an important role in the diabetic complications, including diabetic cataract. The inhibitors of AR, therefore, would be potential agents for prevention of diabetic complications. As part of our ongoing project directed toward the discovery of preventive and/or treatment for diabetic complications, 48 Korean herbal medicines have been investigated with an in vitro evaluation system using aldose reductase inhibitory activities. Of these, 12 herbal medicines exhibited a significant inhibitory activity against aldose reductase. Particularly, seven herbal medicines, i.e., Eurya japonica, Chrysanthemum indicum, Akebia quinata, Saururus chinensis, Catalpa bignonioides, Lonicera japonica, Vitex rotundifolia showed two times more potent inhibitory activity than the positive control 3.3-tetramethyleneglutaric acid (TMG). In addition, Catalpa bignonioides showed the retardation of cataract-opacification of the lens of the eye under diabetic condition by xylose. Therefore, this result may provide a potential therapeutic approach for preventing and treating diabetic cataracts.

• Applied Chemistry for Engineering
• /
• v.20 no.1
• /
• pp.52-61
• /
• 2009

In this study, TAPEH (t-amyl peroxy 2-ethyl hexanoate) was selected for the reaction initiator which is a core factor for developing acrylic polyol binder. Tone M100 (caprolactone acrylate), 4HBA (4-hydroxy butyl acrylate), and 2HEMA (2-hydroxy ethyl methacrylate) were used for hydroxy-monomers. To check the applicability of raw materials mentioned above into the binders of 2 components acrylic polyurethane paint and reduce the VOC, the reactivity and film performance by different kinds of aliphatic polyisocyanate hardeners which are already generalized were reviewed. As the Tin-based catalyst has been regulated, the comparison test of reactivity and performance between the conventional catalyst and non-toxic metal catalyst recommended as the alternative was conducted as well. As a result, we were able to obtain the basic data which are necessary for applying 2 components high solid polyurethane paint and also reached a conclusion that it can be applied for developing new paints in terms of high performance, workability and environmental care.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.12
• /
• pp.4981-4985
• /
• 2015

Background: Colorectal cancer (CRC) is a leading cause of morbidity and mortality worldwide. Targeting autophagic cell death is emerging as a novel strategy in cancer chemotherapy. Aldose reductase (AR) catalyzes the rate limiting step of the polyol pathway of glucose metabolism; besides reducing glucose to sorbitol, AR reduces lipid peroxidation-derived aldehydes and their glutathione conjugates. A complex interplay between autophagic cell death and/or survival may in turn govern tumor metastasis. This exploratory study aimed to investigate the potential role of AR inhibition using a novel inhibitor Fidarestat in the regulation of autophagy in CRC cells. Materials and Methods: For glucose depletion (GD), HT-29 and SW480 CRC cells were rinsed with glucose-free RPMI-1640, followed by incubation in GD medium +/- Fidarestat ($10{\mu}M$). Proteins were extracted by a RIPA-method followed by Western blotting ($35-50{\mu}g$ of protein; n=3). Results: Autophagic regulatory markers, primarily, microtubule associated protein light chain (LC) 3, autophagy-related gene (ATG) 5, ATG 7 and Beclin-1 were expressed in CRC cells; glyceraldehyde-3 phosphate dehydrogenase (GAPDH) was used as an internal reference. LC3 II (14 kDa) expression was relatively high compared to LC3A/B I levels in both CRC cell lines, suggesting occurrence of autophagy. Expression of non-autophagic markers, high mobility group box (HMG)-1 and Bcl-2, was comparatively low. Conclusions: GD +/- ARI induced autophagy in HT-29 and SW-480 cells, thereby implicating Fidarestat as a promising therapeutic agent for colorectal cancer; future studies with more potent ARIs are warranted to fully dissect the molecular regulatory networks for autophagy in colorectal carcinoma.

• The Korean Journal of Mycology
• /
• v.27 no.3 s.90
• /
• pp.181-186
• /
• 1999

Osmotolerant yeast isolated from soy paste could grow on media with 2 M NaCl. This strain was identified as Zygosaccharomyces rouxii by biological characteristics, RFLP of ribosomal DNA and mating with compatible haploid strain. Growing rate of the Z. rouxii YDJ was slower than Saccharomyces cerevisiae. Z. rouxii YDJ accumulated trehalose, which is known as one of the osmolytic protectants, in cells cultured on media with salt. Enzyme activity of trehalose phosphate synthase related to trehalose biosynthesis of the YDJ was lower than those of S. cerevisiae. Trehalase activity related trehalose degradation was also lower in Z. rouxii YDJ than S. cerevisiae. However, as Z. rouxii accumulated trehalose by salt treatment, salt tolerancy of Z. rouxii was assumed to be related to trehalose in additon to glycerol.